How much washing powder should be used?
Fill the hopper on the top cover of the machine according to the selected program. Use only suitable 'low-foam' washing products. The dosage is usually indicated on the packaging. Too much detergent can cause excessive foam, negatively impacting washing results and potentially damaging the machine.
How to create a custom washing program?
Custom wash program creation information was not found. Refer to the Programming Manual for options to choose programming mode locking, make changes to factory settings, wash programs, and other setting options.
How to take the washing machine out of service?
To take the machine out of service, disconnect the power supply and remove the door. The manual also mentions destroying the machine after decommissioning.
How to turn off the machine?
To turn off the machine, follow these steps: 1. Unplug the machine. 2. Turn off the main switch. 3. Cut off the water or steam supply. 4. Ensure that the external power and steam supply are completely cut off.
How to decommission a washing machine?
To take the machine out of service, disconnect the power supply and remove the door, as instructed in the manual. The manual also mentions destroying the machine after decommissioning.
How to turn off the machine?
To turn off the machine, follow these steps: 1. Unplug the machine. 2. Turn off the main switch. 3. Turn off the water or steam supply. 4. Ensure that the external power supply and the steam supply are completely shut off.
How much washing powder should be used?
The document indicates to fill the hopper located on the top cover of the machine in relation to the selected program. It is recommended to use only the right 'low-foam' washing products. The dosage is usually indicated on the packaging. An excessive dose of detergent can lead to 'too much foam' which can negatively affect the washing results and may also damage the machine.
