Metrohm 899 Coulometer Mode d'emploi

To connect a generator electrode: 1. Screw the electrode cable to the generator electrode: Unscrew the generator electrode cover, then screw the 6.2104.120 electrode cable onto the generator electrode. 2. Connect the electrode cable to the coulometer: Insert the electrode plug into the Gen. socket of the coulometer. The electrode cable is protected against accidental cable pull-out by a strain relief. To remove the plug, first pull the outer sleeve of the plug.

To connect a generator electrode: 1. Screw the electrode cable to the generator electrode by unscrewing the generator electrode cover and screwing the 6.2104.120 electrode cable onto the generator electrode. 2. Connect the electrode cable to the coulometer by inserting the electrode plug into the Gen. socket of the coulometer. The electrode cable is protected against accidental cable removal by a strain relief. To remove the plug, the outer sleeve of the plug must first be removed.

In the formula editor, MDC represents 'Drift for Drift Correction'.

Erroneous statistical determinations are eliminated, as described in the statistics section.

In the formula editor, MDC is defined as 'Drift for drift correction'.

Detailed data regarding drift can be found in the results section.

The document mentions the elimination of a statistical determination if it was erroneous, in the statistics section.

To connect a generator electrode: 1. Screw the electrode cable to the generator electrode by unscrewing the generator electrode cover and screwing the 6.2104.120 electrode cable onto the generator electrode. 2. Connect the electrode cable to the coulometer by inserting the electrode plug into the Gen. socket of the coulometer. The electrode cable is protected against accidental removal by a strain relief. To remove the plug, first pull back the outer sleeve of the plug.

The word 'surtitré' does not appear in the viewed document.

The word 'surtitré' does not appear in the document.