DS8124

PDF
Documento
CXR
Configuration des mat&eacute;riels CXR
DSLAM DS 8124
Quick start
Pour toutes questions relatives &agrave; ce document, contacter :
BATARDIERE Beno&icirc;t
02 37 62 87 99 – Email : benoit.batardiere@cxr.fr
BOUCHARD Bruno
02 37 62 88 11 – Email : bruno.bouchard@cxr.fr
SCHMITT Julien
02 37 62 88 16 – Email : julien.schmitt@cxr.fr
CAVAN Charles
02 37 62 88 04 – Email : charles.cavan@cxr.fr
: support@cxr.fr
=================================
SOMMAIRE
1
Architecture .............................................................................................................................................................. 3
2
Configuration du DSLAM ....................................................................................................................................... 4
2.1
Param&egrave;tres par d&eacute;faut ........................................................................................................................................ 4
2.2
Configuration de l’adresse IP de management ( Port console )......................................................................... 5
2.2.1
Login Version software inf&eacute;rieur &agrave; 2.1.27 ( Port console ) ......................................................................... 5
2.2.2
Changement de l’adresse IP ........................................................................................................................ 5
3
4
2.3
Informations g&eacute;n&eacute;rales (Port console ) .............................................................................................................. 6
2.4
Configuration de l’adresse IP de management ( HTTP ) ................................................................................... 7
2.5
System Information ( HTTP ).............................................................................................................................. 8
2.6
Login / Password ................................................................................................................................................ 8
2.7
VC Setup ............................................................................................................................................................. 8
Configuration des modems ADSL ......................................................................................................................... 14
3.1
Configuration par d&eacute;faut .................................................................................................................................. 14
3.2
Mode pure bridge ............................................................................................................................................. 15
3.3
Mode NAT –ADSL X6 ....................................................................................................................................... 16
Ecran de statuts....................................................................................................................................................... 17
4.1
Statuts des connexions et d&eacute;bits........................................................................................................................ 17
4.2
Status des ADSL Mode setting .......................................................................................................................... 18
4.3
Sauvegarde de la configuration........................................................................................................................ 19
4.3.1
Version sup&eacute;rieure ou &eacute;gal &agrave; 2.1.25 .......................................................................................................... 19
4.3.2
Version ant&eacute;rieur &agrave; 2.1.25......................................................................................................................... 19
4.4
T&eacute;l&eacute;chargement du firmware ............................................................................................................................ 20
4.4.1
A l’aide du WEB....................................................................................................................................... 20
Evolutions :
Version 1.0 du 29/09/2006 – Cr&eacute;ation
Version 1.1 du 24/11/2006 – Evolution avec version 2.2.0.
Version 1.3 du 03/03/2008 – Compl&eacute;ment.
Version 2.0 du 07/07/2008 – Evolution avec version 3.0.12.
Quick start
DS8124
1
Architecture
Op&eacute;rator
Modem ADSL / ADSL2+
PABX
Splitter
100-240 VAC
DSL
front
I
ON
O
OFF
SPLITTER
back
ALM OUT
1
2
CASCADE
CONSOLE
1
ALM IN
2
3
MGMT
4
UPLINK 1
UPLINK 2
SFP
SFP
ACO/RST
Variety of uplink interface
- SFP for 1000 Base-SX, LX, LHX and ZX.
- RJ45 for 1000 Base-TX. (Default)
One Ethernet interface (RJ45) support Full Duplex and Half
Duplex transceiver function, conforms to IEEE 802.3 AutoNegotiation standard and comply with IEEE802.3 Ethernet,
IEEE802.3u Fast Ethernet.
Interface Uplink :
- Sans led sur l’embase RJ45 = 1000 BaseT seulement
- Avec led sur l’embase RJ45 = 10/100/1000 BaseT auto-sense
M_quick_start_ds8124_2-0
3/20
Quick start
DS8124
2
Configuration du DSLAM
2.1
Param&egrave;tres par d&eacute;faut
One RS232 console interface (DB9) support Full Duplex, 1.2 stop
bits and odd.even.none parity check. The baud rate range:1200
baud rate ~ 921000 baud rate.
CONSOLE
CASCADE
front
CONSOLE
MGMT
UPLINK 1
UPLINK 2
SFP
SFP
ACO/RST
MGMT
One Ethernet interface (RJ45) support Full Duplex and Half
Duplex transceiver function, conforms to IEEE 802.3 AutoNegotiation standard and comply with IEEE802.3 Ethernet,
IEEE802.3u Fast Ethernet.
System Default Values
Items
IP Address (Switch)
Default Gateway
IP Address (Mgmt port)
Default Gateway
User name
Password
RS232 baud rate
M_quick_start_ds8124_2-0
Default Value
192.168.1.210 / 24
0.0.0.0
192.168.0.210 / 24
0.0.0.0
root
88888888
115200 8N1
Note
Uplinks (both uplink 1 and 2 )
Management
Console port
4/20
Quick start
DS8124
2.2
Configuration de l’adresse IP de management ( Port console )
2.2.1
Login Version software inf&eacute;rieur &agrave; 2.1.27 ( Port console )
BAS login: root
Password: 88888888
~ $ cd ..
/ $ cd home
/home $ cd BAS
/home/BAS $ cd bin
/home/BAS/bin $ . / cliMain.out
MessageQ_out:3
MessageQ_in:4
Cgc open success!
UserNumber 4 Done
BAS&gt;
It is divided into 7 topics:
1.
2.
3.
4.
System:- Deal with system configuration and maintenance.
ADSL:- Introducing and configuring ADSL parameters.
Status :- Display the system status
Switch:- Deal with Switch functions, such as activates and
configures IGMP, RSTP and other protocol parameters. (NOTE:
some of the functions describe in this topic is still under
development).
5. IP:- Dear with IP (Internet Protocol) parameters configuration.
6. Statistics:- Deal with Error performance and statistic counters.
7. Config:- Deal with system parameters and display settings.
After login, help command can be accessed at any time. Help command can be accessed by typing “help” or a “h”. Help
command lists all the available commands that are accessible to the user. The following is a screenshot of the system.
Allez au paragraphe 2.2.3
2.2.2
Changement de l’adresse IP
BAS&gt;ip
BAS/ip&gt;set ip ixp0 [@Ip_mgmt]
*** You set ixp0 IP address to :[@IP_mgmt] ***
done
You must save the IP address by config/save command
BAS/ip&gt;set netmask ixp0 [net_mask]
*** You set ixp0 netMask to [net mask] ***
done
You must save the IP netmask by config/save command
BAS/ip&gt;gateway [@IP_gateway]
*** You set gateway [@IP_mgmt] ***
done
BAS/ip&gt;
SHOW – Display the IP settings for this device ( ixp0, eth0 ).
BAS/ip&gt;show
ixp0 ip addr:
mac addr:
gateway:
net mask:
eth0
ip addr:
mac addr:
gateway:
net mask:
BAS/ip&gt;
192.168.1.210
00:05:ca:00:42:13
0.0.0.0
255.255.255.0
192.168.0.210
00:05:ca:00:42:14
0.0.0.0
255.255.255.0
SAVE - Use this command to save your configuration when you are done with a configuration session.
BAS/ip&gt;exit
BAS&gt;config
BAS/config&gt;save
Do you want to save the current configuration ? (y/n) y
M_quick_start_ds8124_2-0
5/20
Quick start
DS8124
2.3
Informations g&eacute;n&eacute;rales (Port console )
BAS&gt;sys
BAS/sys&gt;info show
Switch name is
Location information:
Contact information:
Phone number:
Part number:1340100003N0
Serial number:340147d961
MGMT MAC:00:05:ca:47:d9:60
Data MAC:00:05:ca:47:d9:61
HW version:1B-60
CPLD version:3.000
SW version:3.0.12
Model No:DS-8124
Made Date:0734
Casecade Mode:0
DSL API Library Version is:1.3.5
DSL Chip SetFW Version is:0x07.0x15.0x04.0x00.0x27
DSL Chip SetHW Version is:PEF_55008_or_PEF_55016_V1.3
DSL Chip Set Type is:Ifx_GEMINAX-D
DSL Driver Version is:4.1.6.34
MIB DataBaseVersion:1.0.2(Software1.0.2)
Bootloader : 1.00.07 (base UBoot 1.1.3)
Linux BAS 2.6.10_mvl401-ixdp42x-arm_xscale_beHitron #3 Mon Jul 24 16:27:47 CST 2
006 armv5teb unknown
BAS 8124 RamDisk Version:3.0.12 MV compiled 18:41:33 Mar 5 2008
Convergate(TM)-C driver, Version 6.2.4
Compiled on Mar 5 2008, 18:37:02 for Linux kernel 2.6.10
Product ID: 55508.1.3.1, Version ID: 4.1.6.34
Compiled on Mar 5 2008, 18:37:12 for Linux kernel 2.6.10_mvl401-ixdp42x-arm_xsc
ale_beHitron
BAS/sys&gt;exit
M_quick_start_ds8124_2-0
6/20
Quick start
DS8124
2.4
Configuration de l’adresse IP de management ( HTTP )
System Default Values
Items
IP Address (Mgmt port)
User name
Password
M_quick_start_ds8124_2-0
Default Value
192.168.0.210 / 24
root
88888888
Note
Management
7/20
Quick start
DS8124
2.5
System Information ( HTTP )
2.6
Login / Password
Default login / password are : root / 88888888
2.7
VC Setup
Configurer les VC Setup
Dans le Menu ADSL/xDSL Port Setup
M_quick_start_ds8124_2-0
8/20
Quick start
DS8124
Puis VC Setup
Choisir le Profil , et Mapper le port, par le bouton MAP
Exemple : Mapping du port 1 &agrave; 8 sur PVC Id 1 avec le profile default ;
Si le profile VC n’existe pas, on peut le cr&eacute;er : ADSL/xDSL Profiles/VC Profile/
M_quick_start_ds8124_2-0
9/20
Quick start
DS8124
Cr&eacute;ation d’un profile 830 : VPI=30 et VCI=8 ;
M_quick_start_ds8124_2-0
10/20
Quick start
DS8124
Le nouveau profile est cr&eacute;&eacute;.
Dans le Menu xDSL Port Setup, configurer le port 1 (par exemple)
ATTENTION, &agrave; partir de la version 3.0.12, ne pas laisser le param&egrave;tre MODE
en AUTO. Il faut fixer la modulation ADSL voulue pour tous les ports.
M_quick_start_ds8124_2-0
11/20
Quick start
DS8124
Puis effectuer un copy vers les autres ports
M_quick_start_ds8124_2-0
12/20
Quick start
DS8124
Pour sauvegarder votre nouvelle configuration : CONFIGURATION/SAVE ;
Attention, si vous voulez cr&eacute;er un profile ADSL (xDSL PROFILES) autre que celui par d&eacute;faut, ne jamais mettre un Min
Rate et un Max rate identique pour le DownStream et l’UpStream.
M_quick_start_ds8124_2-0
13/20
Quick start
DS8124
3
Configuration des modems ADSL
3.1
Configuration par d&eacute;faut
Les modems X5 et X6 sont serveur DHCP avec pour adresse 10.0.0.2 et pool d’adresses commen&ccedil;ant &agrave; 10.0.0.4
M_quick_start_ds8124_2-0
14/20
Quick start
DS8124
3.2
M_quick_start_ds8124_2-0
Mode pure bridge
15/20
Quick start
DS8124
3.3
M_quick_start_ds8124_2-0
Mode NAT –ADSL X6
16/20
Quick start
DS8124
4
4.1
M_quick_start_ds8124_2-0
Ecran de statuts
Statuts des connexions et d&eacute;bits
17/20
Quick start
DS8124
4.2
Status des ADSL Mode setting
Cr&eacute;ation de profils pour la limitation de la bande passante.
Exemples :
- Max-1Mb/s
- Max-2Mb/s
Affectation des profils aux lignes DSL :
M_quick_start_ds8124_2-0
18/20
Quick start
DS8124
Statuts des ports :
4.3
Sauvegarde de la configuration
4.3.1
Version sup&eacute;rieure ou &eacute;gal &agrave; 2.1.25
La sauvegarde est disponible dans le Menu Html
4.3.2
Version ant&eacute;rieur &agrave; 2.1.25
A l’aide d’un client FTP, se connecter sur le DS8124
Les fichiers de configuration a sauvegarder sont dans le r&eacute;pertoire /mnt/jffs2/config
Sauvegarder tous les fichiers et r&eacute;pertoires contenu dans /mnt/jffs2/config
Attention ces fichiers sont uniquement valables pour UN DS8124, car les informations de
Mac address sont contenues dans ces r&eacute;pertoires
Sauvegarde en mode FTP d&eacute;crite dans la documentation (Chapitre 6)
M_quick_start_ds8124_2-0
19/20
Quick start
DS8124
4.4
T&eacute;l&eacute;chargement du firmware
4.4.1
A l’aide du WEB
Cf. AN_22.
M_quick_start_ds8124_2-0
20/20
">
Ciao! Sono un chatbot AI specificamente addestrato per assisterti con il Informazioni sul prodotto. Ho esaminato attentamente il documento e posso aiutarti a individuare le informazioni di cui hai bisogno o spiegare il contenuto in termini chiari e semplici. Che tu stia cercando indicazioni su funzionalità specifiche, passaggi per la risoluzione dei problemi o l'uso generale, non esitare a fare domande. Più dettagli fornisci sulle tue esigenze o dubbi, più accuratamente e efficacemente potrò aiutarti!