Connexion de la pile. Hunter PCC Pro-C

To manually test watering with a Pro-C programmer, there are two main methods according to the consulted document: 1. Manual start of a single station: Turn the selector to MANUAL – SINGLE STATION, use navigation buttons to choose the desired station and set the watering duration, then return the selector to RUN to start watering. 2. Manual start using a button: Hold the right arrow button for 2 seconds. Program A is selected by default (you can change to B or C). Press navigation buttons to define the starting station and operating time. After a 2-second pause without action, the program will start automatically. There is also a test program (via hidden functions) accessible by holding the program selection button while scrolling through stations to activate them sequentially.

To test the watering manually with your Pro-C programmer, you have two main methods: 1. To start a single station manually: turn the selector to MANUAL – SINGLE STATION, use the navigation buttons to select the desired station and set the watering duration, then return the selector to RUN to start watering for that specific station. 2. To start manually using a button: hold down the right arrow button for 2 seconds (program A is selected by default, but can be changed to B or C), use the navigation buttons to define the starting station and operating time, and after a 2-second pause without action, the program will automatically launch. A test program is also available via hidden functions by holding down the program selection button while scrolling through stations to activate them sequentially.