MSG ST25K-150 Manuel du propriétaire

Manuel de l’utilisateur
Manuel de pièces
Operator’s manual
Parts manual
Compact sprayer
Petit Pulvérisateur
Modèle
Model
ST25K & ST25K-150
Modèles précédents / Previously models ST95K & ST95K-150
MS Gregson Inc.
4300 Vachon
Drummondville
Qc, Canada, J2B 6V4
A120-0019 rev5, 2025-01-08 Modèles/models ST25K & ST25K-150
A120-0019 rev4 , NS/SN 2410310 à/to 2511124
Modèles précédents / Previously models ST95K & ST95K-150
Tel. 819-474-1910
Fax 819-474-5317
info@msgregson.com
www.msgregson.com
LISTE DES RUBRIQUES
LIST OF CONTENTS
INTRODUCTION
INTRODUCTION
GARANTIE
WARRANTY
ÉTALONAGE POUR RAMPE (OPT.)
CALIBRATION FOR BOOM (OPT.)
PRÉPARATION DE LA BOUILLIE
MIXTURE PREPARATION
MISE EN MARCHE
STARTING PROCEDURE
MISE À L’ARRÊT
STOPPING PROCEDURE
ENTRETIEN
MAINTENANCE
REMISAGE POUR L'HIVER
ET / OU TRANSPORT PAR
TEMPS FROID (GEL)
WINTERIZATION AND / OR
COLD TEMPERATURE
TRANSPORTATION (FREEZING)
DONNÉES TECHNIQUES
TECHNICAL DATA
INCONVÉNIENTS ET REMÈDES
TROUBLESHOOTING GUIDE
SCHÉMA D’ASSEMBLAGE
DRAWING ASSEMBLY
SCHÉMAS ET LISTES DES
COMPOSANTES
DRAWINGS AND
COMPONENTS LISTS
VUES EXPLOSÉES DES COMPOSANTES
PARTS BREAK DOWN
3/32
4/32
INTRODUCTION
INTRODUCTION
Merci d’avoir choisi un produit de qualité de MS Gregson Inc. Nous
sommes heureux de vous compter parmi les propriétaires
satisfaits de nos pulvérisateurs.
Thank you for having selected a quality MS Gregson Inc.
product. We are pleased to have you included among the many
satisfied owners of our sprayers.
Plusieurs années de recherche ont mené au développement de
cette série de modèles et seulement des pièces et matériaux de
qualité sont utilisés. Chaque machine est soigneusement testée et
inspectée avant de quitter notre usine pour vous assurer des
années de performance.
Years of research have brought into the development of these
fine products and only top quality components and materials are
used throughout. Every machine is carefully tested and inspected before leaving our plant to ensure you years of performance.
Pour une performance continue, souvenez-vous que cette
machine représente un important investissement de votre part
mais, bien entretenue, elle vous retournera votre investissement
plus d’une fois. Comme pour tous les équipements mécaniques,
votre machine requiert une installation adéquate, une bonne
opération et l’entretien spécifié dans ce manuel.
Veuillez lire ce manuel très attentivement et au complet avant
d’installer et d’opérer votre machine. Examinez votre machine, ses
accessoires et la caisse d’emballage pour noter tout dommage ou
pièce manquante. Rapportez rapidement au transporteur toute
réclamation pour perte ou dommage.
5/32
For a continuous performance, remember that this washer is a
substantial investment for you, but properly cared and maintained it will return this investment many times. As with all mechanical equipment, your washer requires proper installation,
proper operation and maintenance as specified in this manual.
Please read carefully the entire manual before installing and
operating this machine. Examine machine, accessories and
crate carefully for shipping damage or missing parts. Report
promptly any shortages or damage claims to freight carrier.
POLITIQUE DE GARANTIES MS GREGSON
MS GREGSON WARRANTY POLICY
GARANTIE LIMITÉE
Les machines fabriqués par MS Gregson Inc. sont garantis, à
l’acheteur initial au détail, comme étant exempts de vices de matériaux ou de fabrication pour les délais spécifiés ci-dessous. Les
conditions d’utilisation normale conformes aux instructions décrites dans le manuel de l’utilisateur s’appliquent. Cette garantie
limitée est sujette aux exclusions ci-dessous énumérées. Elle est
calculée à partir de la date de livraison à l’acheteur initial et
s’applique aux composantes originales seulement. Les pièces
remplacées sous cette garantie jouissent du délai restant de la
garantie pour les composantes correspondantes.
LIMITED WARRANTY
The machines manufactured by MS Gregson Inc. are warranted, to the original purchaser, to be free from defects in materials and workmanship for the periods specified below. Normal
use conditions, according to the instructions in the operator’s
manual, apply. This limited warranty is subject to the exclusions
listed below, is calculated from the date of delivery to the
original purchaser, and applies to the original components only.
Parts replaced under this warranty will assume the remainder
of the corresponding part’s warranty period.
GARANTIE DE 1 AN SUR LES PIÈCES, 1 AN SUR LA MAIN-D’OEUVRE
Les composantes, excluant les accessoires mentionnés cidessous
et les items d’entretien courant mentionnés ci-dessous, sont
couvertes par une garantie de 1 an sur les pièces et la
main-d’oeuvre.
GARANTIE OFFERTE PAR D’AUTRES MANUFACTURIERS
Les moteurs électriques ou à essence, batteries, pneus, jantes,
contrôleur de taux ou autres items dont le manufacturier offre
directement une garantie, sont réparés dans un centre de service
autorisé du manufacturier correspondant. MS Gregson Inc. ne
peut offrir de garantie sur ces items.
EXCLUSIONS DE LA GARANTIE
- Ajustements de routine et articles d’entretien courant tels
que lubrifiants, courroies, boyaux, joints toriques, tamis de
filtre, fusibles, systèmes d’étanchéité de pistolets.
- Réparations requises suite à une collision, un accident, un
choc, un abus, des modifications apportées à l’équipement
sans autorisation, une installation inadéquate, un mauvais
entretien, une utilisation contraire aux directives fournies
dans ce manuel ou au bon sens commun.
- Réparations requises suite au gel ou à l’exposition à des
produits corrosifs.
- Réparation requises suite à des fluctuations de tension
électrique d’alimentation.
- Réparations requises suite à une alimentation insuffisante
en eau ou à une eau de mauvaise qualité.
- Dommage aux cultures dû à un mauvais calibrage ou
usage de l’équipement.
- Dommage aux cultures ou déversement dû à un bris de
composante et/ou un accident.
- Frais résultant de l’arrêt de l’unité durant une réparation ou
pour toute autre raison.
- Frais de transport et/ou de déplacement.
1 YEAR PARTS, 1 YEAR LABOUR WARRANTY
The components, excluding accessories listed below and
normal wear items listed below, are warranted for 1 year on
parts and labour.
WARRANTY PROVIDED BY OTHER MANUFACTURERS
Motors, engines, batteries, wheels, rims, rate controller or other
items which are warranted by their respective manufacturers,
are serviced through these manufacturer’s local authorized
service centres. MS Gregson Inc. cannot provide warranty on
these items.
EXCLUSIONS OF WARRANTY
- Routine adjustments and normal maintenance items
such as lubricants, belts, hoses, O-rings, filter screens,
fuses, gun seal kits.
- Repairs required as a result of collision, accident,
bumping, misuse, modifications made to the equipment
without authorization, incorrect installation, lack of
required maintenance, use contrary to the instructions
included in this manual or to the common sense.
- Repairs required as a result of freezing or exposition to
corrosive products.
- Repairs required as a result of voltage fluctuations of the
electric supply.
- Repairs required as a result of insufficient water supply
or poor quality water.
- Damage to crop due to wrong calibration or incorrect
use of the equipment.
- Damage to crop or spill due to components failure
and/or accident.
- Additional charge resulting from paralyzation and repair
of the equipment.
- Transportation and/or travelling.
EXECUTION OF REPAIRS WITHIN THE WARRANTY PERIOD
In order to obtain warranty service on items warranted by MS
Gregson Inc. within the warranty
EXÉCUTION DE RÉPARATION PENDANT LA PÉRIODE DE GARANTIE
Pour obtenir le service de garantie sur des pièces garanties par
MS Gregson Inc. pendant la
6/32
period, you must show to your dealer a proof of purchase. If the
equipment is permanently installed, repairs will be carried out on
the spot by the dealer. For warranty service on components
warranted by other manufacturers, your authorized MS Gregson dealer can help you obtain warranty service through these
manufacturers’ local authorized service centres. The dealer has
the responsibility to carry out repairs within the warranty period.
Repairs will be done at the dealer’s repair-shop for mobile
equipments ( or at your site upon dealer choice); the purchaser
has the responsibility to bring his equipment to his dealer’s
repair-shop. The parts changed under warranty become the
property of MS Gregson Inc.
période de garantie, vous devez montrer à votre concessionnaire
une preuve d’achat de votre équipement. Si l’équipement est
installé de façon permanente, les réparations seront effectuées
sur place par le concessionnaire. Pour obtenir le service de
garantie sur les composantes garanties par d’autres manufacturiers, votre concessionnaire peut vous aider à obtenir ces services
dans un centre local de service autorisé. Le concessionnaire a la
responsabilité d’effectuer les réparations couvertes pendant la
durée de la garantie. Ces réparations se feront à l’atelier du
concessionnaire pour les équipements mobiles ou chez le client
au choix du concessionnaire ; le client au détail a la responsabilité
d’apporter son équipement chez son concessionnaire. Les pièces
changées sous garantie deviennent la propriété de MS Gregson
Inc.
LIMITATION OF LIABILITY
MS Gregson Inc. liability for
special, incidental, or consequential damages is expressly
disclaimed. In no event shall MS Gregson Inc. liability exceed
the purchase price of the product in question. THE WARRANTY
CONTAINED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
MS Gregson Inc. does not authorize any other party, including
authorized MS Gregson dealers, to make any representation or
promise on behalf of MS Gregson Inc. or to modify the terms,
conditions, or limitations in any way. It is the buyer’s responsibility to ensure that the installation and use of MS Gregson
products conforms to local codes. While MS Gregson Inc.
attempts to assure that its products meet national codes, it
cannot be responsible for how the customer chooses to use or
install the product.
LIMITE DE LA RESPONSABILITÉ
La responsabilité de MS Gregson Inc. pour les dommages
particuliers, accidentels ou conséquents est expressément
déniée. En aucun temps, la responsabilité de MS Gregson Inc.
ne peut excéder le prix d’achat du produit en question. LA
PRÉSENTE GARANTIE TIENT LIEU DE TOUTE AUTRE
GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS TOUTE
GARANTIE IMPLICITE D’ADAPTATION POUR UNE UTILISATION PARTICULIÈRE. MS Gregson Inc. n’autorise aucune autre
partie, incluant les concessionnaires MS Gregson autorisés, à
faire toute représentation ou promesse au nom de MS Gregson
Inc. ou à modifier les termes, conditions ou limitations d’aucune
façon. Il est de la responsabilité de l’acheteur de s’assurer que
l’installation et l’utilisation des produits MS Gregson respectent
les codes locaux. Bien que MS Gregson Inc. tente de s’assurer
que ses produits rencontrent les codes nationaux, elle ne peut
être responsable de la façon dont le client choisit d’installer ou
7/32
ÉTALONAGE POUR RAMPE (opt.)
CALIBRATION FOR BOOM (opt.)
Lire l’étiquette du produit et déterminer le taux d’application.
Read chemical product label and determine your target rate.
Déterminer la vitesse d’avancement (mph / km/h) avec le
véhicule en mesurant une distance (TABLEAU 1).
Determine your working speed (mph / km/h) with your vehicule
by measuring distance (TABLE 1).
Faire une marque sur le levier d’accélérateur pour avoir toujours
la même vitesse.
Make a mark on throttle position to always work at the same
speed.
Trouver le taux correspondant à la vitesse d’avancement
(TABLEAU 2).
Find corresponding rate to your working speed (TABLE 2).
AVERTISSEMENT :
Il est préférable de faire un essai avec de l’eau.
WARNING:
It is recommended to make a test with water.
Vérifier la quantité d’eau utilisée comparativement à la superficie
pulvérisée et s’assurer du taux d’application afin d’éviter une
sous ou une sur-application.
Verify how much water you use compared to the treated area
to be sure of spraying rate, avoiding all under or over
application.
NOTE :
Pour assistance contacter les autorités agricoles locales ou votre
concessionnaire de produit pour la calibration.
NOTE:
For assistance contact your agricultural local authorities or
chemical dealer to help you on calibration.
tableau 1 / table 1
Vitesse MPH speed
0.5
0.75
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Vitesse km/h speed
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
Time required in sec. to travel a distance of /
temps en secondes pour une distance de
100 pied/feet
200 pied/feet
300 pied/feet
136
273
409
90
182
272
68
136
205
45
91
136
34
68
102
27
55
82
23
45
68
19
39
58
17
34
51
Time required in sec. to travel a distance of /
temps en secondes pour une distance de
30 m
60 m
90 m
216
432
648
108
216
324
72
144
216
54
108
162
43
86
130
36
72
108
32
63
95
27
54
81
23
45
68
18
36
54
8/32
tableau 2 / table 2
Ce tableau est basé sur :
This chart is based on:
buse : TEEJET TFVP3
Débit à une buse (max.): 2 l/min (0.53 gpm)
Espacement : 91.44 cm (36’’)
nozzle : TEEJET TFVP3
max. flow at nozzle : 2 l/min (0.53 gpm)
spacing : 91.44 cm (36’’)
Formule:
GPA=(5940 x 0.53 gpm) / (MPH x 36’’)
l/ha = (60000 x 2 l/min) / (km/h x 91.44 cm)
Formula:
GPA=(5940 x 0.53 gpm) / (MPH x 36’’)
l/ha = (60000 x 2 l/min) / (km/h x 91.44 cm)
Vitesse d’avancement / working speed
MPH
pi/min
km/h
ft/min
Gal US / acre
US GPA
Taux d’application / Application rate
Gal US/1000 pi ²
l/ha
US gal. / 1000
ml/100 m²
sq.ft.
l / 100 m ²
0.5
44
0.80
174
506
1630
16.3
0.75
66
1.21
116
337
1087
10.9
1.0
88
1.61
87
253
815
8.2
1.5
132
2.41
58
169
543
5.4
2.0
176
3.22
44
126
408
4.1
2.5
220
4.02
35
101
326
3.3
3.0
264
4.83
29
84
272
2.7
3.5
308
5.63
25
72
233
2.3
4.0
352
6.44
22
63
204
2.0
9/32
PRÉPARATION DE LA BOUILLIE
MIXTURE PREPARATION
Remplir le réservoir au 2/3 de la quantité requise pour le
traitement à effectuer.
Fill the tank to 2/3 of needed volume for treatment to be made.
NOTE :
S’assurer d’avoir le temps requis pour compléter le traitement
selon les conditions météorologiques. Ne jamais laisser de
produit non-utilisé dans le réservoir et dans la plomberie de
l’unité. Porter les équipements de protection requis pour la
manutention des produits.
NOTE:
Make sure there is enough time to complete the application
depending on weather conditions. Never leave unused
product in the tank and in the unit plumbing. Wear protective
equipment when handling chemicals.
Verser directement les produits dans le réservoir.
Pour chemical in the tank.
NOTE :
Suivre les recommandations de dilution pour les produits de type
granulaire ou en poudre. Toujours diluer avec de l’eau dans un
autre contenant avant de verser dans le réservoir.
NOTE:
Follow label instruction for dilution rate for granular and powder
product. Always dilute with water in another jar before pouring
it into the tank.
Entrer la buse du pistolet par le couvercle et actionner la
gâchette pour agiter le produit. (Voir étape MISE EN MARCHE).
Insert handgun in the tank and press the gun trigger to agitate
product in the tank. (See STARTING PROCEDURE).
Ajouter de l’eau jusqu’à la quantité désirée. Agiter jusqu’à un
mélange homogène. Retirer et rincer la lance avec de l’eau
claire dans une réservoir. Fermer le couvercle.
Add water up to the desired water level. Agitate until
satisfactory mix is obtained. Remove and rinse the wand with
clear
water
in
a
tank.
Close
the
lid
MISE EN MARCHE
STARTING PROCEDURE
Installer l’unité au point d’attache du tracteur et brancher la
connexion électrique a l’unité.
Attach unit tongue to the tractor and hook up the electrical
connection to the unit pump.
NOTE :
L’unité doit être au niveau ou avec une légère pente vers l’avant
une fois installé à l’attache du tracteur.
NOTE:
The unit tank must be level or with slight slope forward when
attached to tractor.
Mettre les interrupteurs en position ON (l’interrupteur sur la
pompe et sur l’auxiliaire).
Turn ON the switches (switch on the pump and the auxiliary).
Utiliser le pistolet pour bien mélanger le produit dans le réservoir,
si l’unité a été entreposé un certain temps, se référer aux
étiquettes de produit pour les taux de dilution (voir
ÉTALONNAGE).
If the unit has been sitting for a while use the spray gun to
have a good mixture in the tank, refer to product label for
dilution rate (see CALIBRATION).
Utiliser le pistolet pour les endroits difficiles d’accès et en
hauteur. Ajuster la buse pour obtenir la distance désirée.
Use the gun for areas that are difficult to access and for high
treatment. Adjust nozzle to obtain proper spray pattern.
Au besoin, ouvrir la vanne d’alimentation de la rampe. Un
étalonnage doit être fait pour s’assurer de la dose à appliquer à
chaque utilisation (voir ÉTALONNAGE). S’assurer que les deux
buses ont le même débit à l’aide de contenants. Utiliser
l’interrupteur ON/OFF pour contrôler la pulvérisation des buses
de la rampe à partir du siège de l’opérateur. Avec un point de
If needed, open the boom supply valve. Calibration must be
done before each use to be sure of proper rate (see
CALIBRATION). Be sure to have same flow at both nozzles
with calibration jar. Use ON/OFF switch to control spraying
nozzle on the boom from operator’s seat. With stakes, make
runs with regular width to cover entire area to treat uniformly.
10/32
repère faire des passages de largeur régulière pour couvrir la
superficie à traiter de façon uniforme.
MISE À L’ARRÊT
STOPPING PROCEDURE
Mettre l’interrupteur en position OFF.
Turn OFF the switch.
Fermer la vanne d’alimentation de la rampe.
Close the boom supply valve.
IMPORTANT :
Rincer le réservoir de l’unité et la plomberie avec de l’eau claire
après chaque utilisation (voir ENTRETIEN / REMISAGE).
IMPORTANT:
Rinse the unit tank and the plumbing with clear water after
each use (see MAINTENANCE / STORAGE).
ENTRETIEN / REMISAGE
MAINTENANCE / STORAGE
Pompe :
Rincer avec de l’eau claire après chaque utilisation spécialement
après une pulvérisation avec de l’engrais liquide, une insecticide
ou un fongicide. Toujours porter un équipement de protection.
Pump:
Rinse after each use with clear water especially if you use a
liquid fertilizer, an insecticide or a fungicide. Always wear
protective clothing.
Filtre d’alimentation :
Vérifier et nettoyer régulièrement le filtre d’alimentation d’eau
dans le réservoir.
Suction filter:
Regularly check and clean the suction water filter in the tank.
Buses :
Vérifier et nettoyer régulièrement les buses pour éviter tout
colmatage ou diminution de débit.
Nozzles:
Regularly check and clean nozzles to avoid plugging and lower
flow rate.
Nettoyage :
Nettoyer tous les filtres avant de commencer cette étape. Laver
et rincer avec un produit neutralisant tous les équipements ayant
été en contact direct ou indirect tel que l’embrun pour éviter tout
risque de contamination lors de la manutention et l’entreposage.
Consulter le fournisseur de produits sanitaire pour les produits de
nettoyage et de neutralisation pour pulvérisateur. Nettoyer tous
les filtres à nouveau.
Cleaning:
Clean all filters before starting this operation. Clean and wash
with neutralizing product all the equipment that has been in
direct or indirect contact with drift to avoid contamination in
handling or storage. Consult your product suppliers to obtain
cleaning and neutralizing product for sprayer. Clean all the
filters again.
Toujours nettoyer les équipements de pulvérisation dans un
endroit bien aéré et non-cultivé et loin des sources d’eau potable.
Consulter les instances agricoles locales pour les moyens à
prendre et les règles à suivre pour éviter toute contamination des
sources d’eau potable, enfants et animaux domestiques.
Always clean the sprayer equipment in a ventilated area and
non-cultivated area away from water source. Contact local
agricultural authorities for advice on disposal and laws to avoid
contamination of water source, kids and pets.
REMISA GE
STORA GE
Rincer et drainer le réservoir, la rampe, les tubes, les boyaux
ainsi que la pompe.
Rinse and drain the tank, the boom, the tubes, the hoses and
the pump.
Faire fonctionner l’unité en aspirant une solution d’antigel
(prestone) de façon à ce qu’elle en soit complètement rempli
Operate the system by sucking an anti-freeze (prestone)
solution through the hoses and the pump. NOTE: Do not use
11/32
(boyaux et pompe). NOTE : ne pas utiliser de liquide lavevitre.
windshield washer fluid.
Enlever la base et le tamis du filtre.
Take-off base and filter screen.
Enlever le cadran à pression et remiser au chaud (ne supporte
pas le gel).
Take-off pressure gage and put it in a warm place (it does not
support freezing).
S’assurer qu’il ne reste plus de liquide dans les filtres.
Make sure that no liquid is left into the filters.
Avant de mettre à nouveau l’unité en marche, bien vider et laver
le réservoir, les boyaux et la pompe.
Before starting the unit again, be sure that the tank, hoses and
pump are well emptied and washed.
12/32
DONNÉES TECHNI QUES ST25K
TECHNI CAL DATA ST25K
Usage
Usage agricole
Use
Agricultural use
Débit
1.8 gal. US/min
(6.8 l/min)
3.1 bars
45 lb/po²
Flow rate
1.8 US gpm
(6.8 l/min)
3.1 bars
45 psi
Pression maximum
Maximum pressure
courant
5.8 A
tension 12 Vcc
Pompe
Shurflow 8007543250
Boyau / pistolet
boyau 1/4 po x 26 pi
pistolet
60 lb/po² , 0.6 à 1.7 l/min
Dimensions
30 x 23 x 38 po
(L x l x H) expedition
(76 x 58 x 97 cm)
Poids à vide
27 kg
60 lbs.
Moteur
Capacité du réservoir
current
5.8 A
voltage 12 Vdc
Pump
Shurflow 8007543250
Hose / gun
hose 1/4 inch x 26 feet
gun 60 psi, 0.6 to 1.7 l/min
Dimensions
30” x 23” x 38”
(L x W x H) shipping
(76 x 58 x 97 cm)
Empty weight
27 kg
60 lbs.
Engine
95 litres
25 gallons US
95 litres
25 US gallons
Tank capacity
DONNÉES TECHNI QUES ST25K-150
TECHNI CAL DATA ST25K-150
Usage
Débit
Use
Flow rate
Usage agricole
1.5 gal. US/min
(5.7 l/min)
Pression maximum
10.3 bars
150 lb/po²
Moteur
courant 12 A
tension 12 Vcc
Pompe
Shurflow 8030813239
Boyau / pistolet
boyau 1/4 po x 26 pi
pistolet
Dimensions
(L x l x H) expedition
Poids à vide
Capacité du réservoir
Agricultural use
1.5 US gpm
(5.7 l/min)
Maximum pressure
10.3 bars
150 psi
Engine
current 12 A
voltage 12 Vdc
Pump
Shurflow 8030813239
Hose / gun
hose 1/4 inch x 26 feet
60 lb/po² , 0.6 à 1.7 l/min
30 x 23 x 38 po
gun
Dimensions
(76 x 58 x 97 cm)
27 kg
60 lbs.
95 litres
25 gallons US
(L x W x H) shipping
Empty weight
Tank capacity
13/32
60 psi, 0.6 to 1.7 l/min
30” x 23” x 38”
(76 x 58 x 97 cm)
27 kg
60 lbs.
95 litres
25 US gallons
14/32
15/32
Nettoyer ou remplacer.
Remplacer.
Refaire étape d’étalonnage
ou consulter le
concessionnaire pour
assistance.
Les filtres sont bouchés.
Les buses sont usées.
Mauvais étalonnage.
Le siège du fusil n’est pas
étanche.
Mauvaise dose d’application
Fuite de liquide par la buse
du fusil
Nettoyer ou remplacer.
Nettoyer ou remplacer.
Nettoyer ou remplacer.
Nettoyer ou remplacer.
Les filtres sont bouchés.
Le filtre d’aspiration est
bouché.
Les buses sont bouchées.
Vérifier la tuyauterie.
Nettoyer ou remplacer.
Nettoyer ou remplacer.
Les valves de la pompe
sont usées ou sales.
La pompe aspire de l’air.
Les buses sont bouchées.
Vérifier la tuyauterie de
l’alimentation.
Remplacer.
Le moteur est défectueux.
La pompe aspire de l’air.
Mettre l’interrupteur sur la
pompe et l’interrupteur
auxiliaire à la position ON.
Le moteur n’est pas
alimenté en courant.
Nettoyer ou remplacer.
Remplacer.
Le/les fusibles sont brûlés.
Les valves de la pompe
sont usées ou sales.
Brancher l’alimentation
électrique.
SOLUT ION
Le moteur n’est pas
alimenté en courant.
CAUSE
Traitement non-uniforme,
débit différent aux buses de
rampe
La pompe fonctionne mais le
liquide ne coule pas aux
buses.
La pression n'est pas
régulière.
La pompe fonctionne, mais
ne donne pas la pression
maximum.
Le moteur ne fonctionne pas
PROBL ÈME
I NCONVÉNI ENTS ET REMÈDES
15
Liquid leakage at the gun
spray nozzle.
Wrong spray rate.
Uneven spray, different
flows at the boom nozzles.
The pump is working but no
liquid comes out from the
nozzles.
Fluctuating pressure.
The pump runs, but does
not give maximum
pressure.
The motor does not run.
FAULT
The seat is not tight.
The nozzles are worn.
Wrong calibration.
The filters are plugged.
The suction filter is
plugged.
The nozzles are
plugged.
The filters are plugged.
Pump is sucking air.
The nozzles are
plugged.
The pump valves are
worn or dirty.
Pump is sucking air.
The pump valves are
worn or dirty.
The motor is defective.
There is no power
supply.
One or both fuses are
burnt out.
There is no power
supply.
CAUSE
Clean or replace.
Replace.
Redo the calibration step
or consult your local
dealer for assistance.
Clean or replace.
Clean or replace.
Clean or replace.
Clean or replace.
Check the suction line.
Clean or replace.
Clean or replace.
Check the suction line.
Clean or replace.
Replace.
Put the switch on the
pump and the auxiliary
switch in ON position.
Replace.
Connect power cable.
REMED Y
TROUBLESHOOTI NG GUI DE
#
REF.
Q.
L"
1
LV-12K3150
1
16 "
2
LV-38K3150
1
224 "
2
16
20
15
4
19
14
21
12
5 6
13
7
8
22
17
16
1
8
3
9
10
11
23
AC-30101
18
#
REF.
Q.
3
AC-SB25WPSPR
1
4
SH-8007543250
1
5
BT-FW316
4
6
BT-10241RS
4
7
JB-EL3812NY40
1
8
SN-078008
2
9
JB-IHB0004NY40
1
10
JB-38000035
1
11
MP-3B34G
1
12
JB-M3800NY40
1
13
JB-TT38NY
1
14
JB-VMM0003NY40
1
15
JB-IMB0303NY40
1
16
SN-078005
2
17
JB-5080021AL406
1
18
AC-12200
1
19
AU-FIL2B8
1
20
AU-666257
1
21
AU-MIN10
1
22
DO-761022
2
23* AU-PNS3-G
1
24
AU-DECAVER3
1
25
AU-DECAVER7
1
26
AU-DECMSLOGOB-G
2
27* AU-BL371918
1
28* A120-0019
1
29* AU-SAZL46
1
30* AU-L8400M
4
25
24
AC-19009
AC-10960
AC-19010
26
Rouge
Red
Bat +
Bat -
16/32
Rouge
Red
Noir
Black
2025-01-07
ST25K
Pg:1-2
Rev: 0
SH-8007543250
Pompe Shurflo • Shurflo pump
REF
3B
4
8
9
10
11
12
NO
SH-3018900
SH-121001
SH-9437900
SH-1116801
SH-9439107
SH-9438532
SH-8007543SW
SH-8471200
DESCRIPTION
No control plate
Screw
Upper housing
Motor with electrical package
Valve assembly
Solid diaphragm drive assembly
Switch
Case assembly
Q
1
3
1
1
1
1
1
1
POMPE COMPLÈTE / PUMP ASSEMBLY
POMPE COMPLÈTE / PUMP ASSEMBLY
Débit . . . . . . . . . . . . . . . . . . .1.8 gal US/min - 6.8 l/min
Flow rate . . . . . . . . . . . . . . . .1.8 US GPM - 6.8 l/min
Pression maximale . . . . . . . .45 lb/po2
Maximum pressure . . . . . . . .45 PSI
Contrôle . . . . . . . . . . . . . . . . .“By-pass” interne
Control . . . . . . . . . . . . . . . . .Internal by-pass
Came . . . . . . . . . . . . . . . . . . .3.0 degrés
Cam . . . . . . . . . . . . . . . . . . .3.0 degrees
Commutateur de pression . . .non
Pressure switch . . . . . . . . . . .none
Volt . . . . . . . . . . . . . . . . . . . .12V DC
Volt . . . . . . . . . . . . . . . . . . . .12V DC
Ampérage . . . . . . . . . . . . . . .5.6 amp
Amperage . . . . . . . . . . . . . . .5.6 amp
Corps de pompe . . . . . . . . . .Polypropylène
Pump housing . . . . . . . . . . . .Polypropylene
Membrane . . . . . . . . . . . . . . .Santoprene
Diaphragm . . . . . . . . . . . . . .Santoprene
Valves . . . . . . . . . . . . . . . . . .Viton
Valves . . . . . . . . . . . . . . . . . .Viton
Entrée-sortie . . . . . . . . . . . . .3/8” FNPT
Ports . . . . . . . . . . . . . . . . . . .3/8” FNPT
Température de liquide . . . . .170°F / 77°C max.
Liquid temperature . . . . . . . .170°F / 77°C max.
Auto-amorçage . . . . . . . . . . .jusqu’à 11‘ d’élévation
Self-priming . . . . . . . . . . . . .up to 11’ vertical
Pression max. d’entrée . . . . .30 lb/po2
Max. inlet pressure . . . . . . . .30 PSI
Usage . . . . . . . . . . . . . . . . . .Continu
Duty cycle . . . . . . . . . . . . . . .Continuous
Poids . . . . . . . . . . . . . . . . . . .4.6 lb (2.1 kg)
Weight . . . . . . . . . . . . . . . . . .4.6 lb (2.1 kg)
SH-8007543250
17/32
27/03/07 14:48
#
REF.
Q.
L"
1
LV-12K3150
2
16 "
2
LV-38K3150
1
240 "
17
16
20
5
22
26
24
9 18
15
23
25
13
7 6
29
9
14
8
21
1
20
29
19
A
1
28
9
31
10
4
11
12
27
AC-30101
DETAIL A
30
33
32
AC-19009
AC-10960
AC-19010
#
REF.
Q.
4
AC-SB25WPSPR
1
5
SH-8030813239
1
6
BT-10241RS
4
7
BT-FW316
4
8
JB-EL3812NY40
1
9
SN-078008
3
10
JB-IHB0004NY40
1
11
JB-38000035
1
12
MP-3B34G
1
13
JB-RMM0304NY
1
14
BJ-CR050
1
15
JB-VMM0004NY40
1
16
JB-2312012PP
1
17
JB-025FF00200
1
18
JB-IMB0404NY40
1
19
JB-EL1238NY40
1
20
SN-078005
2
21
JB-5080021AL406
1
22
AU-761245
2
23
AU-10199
1
24
AU-FIL2B8
1
25
DO-761357
2
26
AU-PPCA20173
1
27
AU-666257
1
28
AU-MIN10
1
29
DO-761022
2
30
AC-12200
1
31* AU-PNS3-G
1
32
AU-DECAVER3
1
33
AU-DECAVER7
1
34
AU-DECMSLOGOB-G
2
35* AU-L8400M
4
36* AU-SAZL46
1
37* A120-0019
1
38* AU-BL371918
1
34
Bat +
Bat -
18/32
Rouge
Red
Rouge
Red
Noir
Black
2025-01-08
ST25K-150
Pg:1-2
Rev: 0
SH-8030813239
Pompe • Pump
Model number
Complete pump assembly
Switch assembly
Upper housing
Bypass/ non bypass valve assembly
Diaphragm assembly
Drive/ impeller assembly
Motor
1
2
4
5
6
7
8
SH-8030813239
N/A
SH-8437520
SH-9437901
SH-9439015
SH-9438532
N/A
SH-1122700
POMPE COMPLÈTE / PUMP ASSEMBLY
POMPE COMPLÈTE / PUMP ASSEMBLY
Débit . . . . . . . . . . . . . . . . . . .1.5 gal US/min - 5.5 l/min
Flow rate . . . . . . . . . . . . . . . .1.5 US GPM - 5.5 l/min
Pression maximale . . . . . . . .150 lb/po2
Maximum pressure . . . . . . . .150 PSI
Contrôle . . . . . . . . . . . . . . . . .Commutateur de pression
Control . . . . . . . . . . . . . . . . .Pressure switch
Came . . . . . . . . . . . . . . . . . . .3.0 degrés
Cam . . . . . . . . . . . . . . . . . . .3.0 degrees
Volt . . . . . . . . . . . . . . . . . . . .12V DC
Volt . . . . . . . . . . . . . . . . . . . .12V DC
Ampérage . . . . . . . . . . . . . . .12 amp
Amperage . . . . . . . . . . . . . . .12 amp
Corps de pompe . . . . . . . . . .Polypropylène
Pump housing . . . . . . . . . . . .Polypropylene
Membrane . . . . . . . . . . . . . . .Santoprene
Diaphragm . . . . . . . . . . . . . .Santoprene
Valves . . . . . . . . . . . . . . . . . .Viton
Valves . . . . . . . . . . . . . . . . . .Viton
Entrée-sortie . . . . . . . . . . . . .3/8” FNPT
Ports . . . . . . . . . . . . . . . . . . .3/8” FNPT
Température de liquide . . . . .170°F / 77°C max.
Liquid temperature . . . . . . . .170°F / 77°C max.
Auto-amorçage . . . . . . . . . . .jusqu’à 8‘ d’élévation
Self-priming . . . . . . . . . . . . .Up to 8’ vertical
Pression max. d’entrée . . . . .30 lb/po2
Max. inlet pressure . . . . . . . .30 PSI
Usage . . . . . . . . . . . . . . . . . .Continu
Duty cycle . . . . . . . . . . . . . . .Continuous
Poids . . . . . . . . . . . . . . . . . . .4.2 lb (1.9 kg)
Weight . . . . . . . . . . . . . . . . . .4.2 lb (1.9 kg)
SH-8030813239
19/32
26/06/09 11:54
JB-23120
Régulateur • Regulator
REF NO
DESCRIPTION
Q
1
2
3
4
Adjusting cap, nylon (gray)
Spring retainer, polypropylene (black)
Retaining pin, type 302 s. steel
O-ring, EPDM rubber (std)
O-ring, Viton (opt.)
Spring, type 302 s. steel (std)
Spring, type 316 s. steel (opt.)
Guide seat, polypropylene (black)
Lock ring, polypropylene (gray)
Body, polypropylene (black) / JB-2312012PP
Body, polypropylene (black) / JB-2312034OO
1/4 pipe plug, nylon
1
1
1
1
1
1
1
1
1
1
1
1
5
6
7
8
9
JB-CP23122NY
JB-CP23124PPB
JB-CP23126302SS
JB-CP771715EPR
JB-CP771715VI
JB-CP23127302SS
JB-CP23127316SS
JB-CP23125PPB
JB-CP23123PP
JB-CP231281PPB
JB-CP231211PPB
JB-840014NY
JB-23120 05/11/2003 15:25
20/32
21/32
REF.
LV-38K3150
#
1
1
Q.
L"
60 "
17 16 15 15 14
13
Enlever
Remove
12
5
6
7
18
4
2
19 15 15 16 17
8
9
10
5
1
4
3
10
11
JB-SE14NY40
JB-TT14NY40
C800-0005
5
6
7
9
JB-EL3838NY
AU-2137PP
C800-0006
BT-142
BT-FW14
BT-LW14
SN-WN6
AU-3213PP
BT-14214
12
13
14
15
16
17
18
19
2011/06/15
CR800-PP015A00201
SN-078006
11
AU-L5300M
JB-8121NY406
10
9*
JB-467614NY
BJ-LV025MTV
4
8
JB-14XP10RVP
3
REF.
JB-14XP10LVP
#
2
Pg:1-2
Rev: 0
2
1
4
4
8
2
1
1
1
2
6
1
1
1
1
2
2
1
1
Q.
22/32
REF.
LV-12K3150
#
1
9
1
Q.
3
L"
8
240 "
7
4
6
1
8
9
2
8
7
4
5
1
8
9
2
8
7
4
1
8
8
1
8
9
2
8
4
5
1
3
4
6
JB-8027NY
7
8
JB-OC03
6
9
JB-TP11003VP
5
5
8
1
8
11
12
13
11
8
10
7
7
2010/11/16
PP00066
Vendu non assemblé
Sold not assembled
JB-050FFBT
JB-IMB0404BR
14
8
15
JB-3FBP
13
1
JB-3FPS
JB-IMB0304BR
11
15
12
JB-T12NY40
9
10
14
14
JB-AA111SQ1
8
8
DA-SHAS6
JB-8079PP50
4
1
JB-8121NY540
3
8
JB-8120NY540
REF.
2
#
11
Pg:1-1
Rev: 0
1
2
1
1
3
1
5
16
5
2
3
5
2
3
Q.
23/32
VisiFlo® Flat Spray Tips
Features:
■
Tapered edge flat spray pattern for uniform
coverage in broadcast spraying.
■
VisiFlo color-coded version available in
stainless steel, ceramic and polymer in
80° or 110° spray angles in selected sizes.
■
Available in ceramic 80° capacities
01– 03 and 110° capacities 01– 02.
See XR and XRC TeeJet® tips on
pages 10 and 11 for larger capacities.
■
Available in brass in 110° spray angle
only with VisiFlo color-coding.
TP650050†
TP800050†
TP1100050†
(100)
TP650067†
TP800067†
TP1100067†
(100)
TP6501†
TP8001
TP11001
(100)
TP65015†
TP80015
TP110015
(100)
TP6502†
TP8002
TP11002
(50)
TP6503†
TP8003
TP11003
(50)
TP6504†
TP8004
TP11004
(50)
TP6505†
TP8005
TP11005
(50)
TP6506†
TP8006
TP11006
(50)
TP6508†
TP8008
TP11008
(50)
TP6510†
TP8010†
TP11010†
TP6515†
TP8015†
TP11015†
TP6520†
TP8020†
TP11020†
bar
CAPACITY
ONE
NOZZLE
IN l/min
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
0.16
0.18
0.20
0.22
0.23
0.21
0.24
0.26
0.28
0.30
0.32
0.36
0.39
0.42
0.45
0.48
0.54
0.59
0.64
0.68
0.65
0.72
0.79
0.85
0.91
0.96
1.08
1.18
1.27
1.36
1.29
1.44
1.58
1.71
1.82
1.61
1.80
1.97
2.13
2.27
1.94
2.16
2.37
2.56
2.74
2.58
2.88
3.16
3.41
3.65
3.23
3.61
3.95
4.27
4.56
4.83
5.40
5.92
6.39
6.84
6.44
7.20
7.89
8.52
9.11
■
Standard version (not color-coded)
available in 15°, 25°, 40°, 50° and
65° spray angles in brass, stainless
steel or hardened stainless steel.
■
See page 33 for TeeJet even
flat spray tips.
■
Automatic spray alignment with
25612-*-NYR Quick TeeJet® cap
and gasket. Reference page
55 for more information.
■
Automatic spray alignment for sizes
10 thru 20 with 25610-*-NYR Quick
TeeJet cap and gasket. Reference
page 55 for more information.
l/ha
4
km/h
5
km/h
6
km/h
7
km/h
8
km/h
50 cm
10
km/h
12
km/h
16
km/h
18
km/h
20
km/h
25
km/h
30
km/h
35
km/h
48.0 38.4
32.0
27.4 24.0 19.2
54.0 43.2
36.0
30.9 27.0 21.6
60.0 48.0
40.0
34.3 30.0 24.0
66.0 52.8
44.0
37.7 33.0 26.4
69.0 55.2
46.0
39.4 34.5 27.6
63.0 50.4
42.0
36.0 31.5 25.2
72.0 57.6
48.0
41.1 36.0 28.8
78.0 62.4
52.0
44.6 39.0 31.2
84.0 67.2
56.0
48.0 42.0 33.6
90.0 72.0
60.0
51.4 45.0 36.0
96.0 76.8
64.0
54.9 48.0 38.4
108
86.4
72.0
61.7 54.0 43.2
117
93.6
78.0
66.9 58.5 46.8
126
101
84.0
72.0 63.0 50.4
135
108
90.0
77.1 67.5 54.0
144
115
96.0
82.3 72.0 57.6
162
130
108
92.6 81.0 64.8
177
142
118
101
88.5 70.8
192
154
128
110
96.0 76.8
204
163
136
117
102
81.6
195
156
130
111
97.5 78.0
216
173
144
123
108
86.4
237
190
158
135
119
94.8
255
204
170
146
128
102
273
218
182
156
137
109
288
230
192
165
144
115
324
259
216
185
162
130
354
283
236
202
177
142
381
305
254
218
191
152
408
326
272
233
204
163
387
310
258
221
194
155
432
346
288
247
216
173
474
379
316
271
237
190
513
410
342
293
257
205
546
437
364
312
273
218
483
386
322
276
242
193
540
432
360
309
270
216
591
473
394
338
296
236
639
511
426
365
320
256
681
545
454
389
341
272
582
466
388
333
291
233
648
518
432
370
324
259
711
569
474
406
356
284
768
614
512
439
384
307
822
658
548
470
411
329
774
619
516
442
387
310
864
691
576
494
432
346
948
758
632
542
474
379
1023
818
682
585
512
409
1095
876
730
626
548
438
969
775
646
554
485
388
1083
866
722
619
542
433
1185
948
790
677
593
474
1281 1025
854
732
641
512
1368 1094
912
782
684
547
1449 1159
966
828
725
580
1620 1296 1080
926
810
648
1776 1421 1184 1015
888
710
1917 1534 1278 1095
959
767
2052 1642 1368 1173 1026
821
1932 1546 1288 1104
966
773
2160 1728 1440 1234 1080
864
2367 1894 1578 1353 1184
947
2556 2045 1704 1461 1278 1022
2733 2186 1822 1562 1367 1093
16.0
18.0
20.0
22.0
23.0
21.0
24.0
26.0
28.0
30.0
32.0
36.0
39.0
42.0
45.0
48.0
54.0
59.0
64.0
68.0
65.0
72.0
79.0
85.0
91.0
96.0
108
118
127
136
129
144
158
171
182
161
180
197
213
227
194
216
237
256
274
258
288
316
341
365
323
361
395
427
456
483
540
592
639
684
644
720
789
852
911
12.0
13.5
15.0
16.5
17.3
15.8
18.0
19.5
21.0
22.5
24.0
27.0
29.3
31.5
33.8
36.0
40.5
44.3
48.0
51.0
48.8
54.0
59.3
63.8
68.3
72.0
81.0
88.5
95.3
102
96.8
108
119
128
137
121
135
148
160
170
146
162
178
192
206
194
216
237
256
274
242
271
296
320
342
362
405
444
479
513
483
540
592
639
683
10.7
12.0
13.3
14.7
15.3
14.0
16.0
17.3
18.7
20.0
21.3
24.0
26.0
28.0
30.0
32.0
36.0
39.3
42.7
45.3
43.3
48.0
52.7
56.7
60.7
64.0
72.0
78.7
84.7
90.7
86.0
96.0
105
114
121
107
120
131
142
151
129
144
158
171
183
172
192
211
227
243
215
241
263
285
304
322
360
395
426
456
429
480
526
568
607
9.6
10.8
12.0
13.2
13.8
12.6
14.4
15.6
16.8
18.0
19.2
21.6
23.4
25.2
27.0
28.8
32.4
35.4
38.4
40.8
39.0
43.2
47.4
51.0
54.6
57.6
64.8
70.8
76.2
81.6
77.4
86.4
94.8
103
109
96.6
108
118
128
136
116
130
142
154
164
155
173
190
205
219
194
217
237
256
274
290
324
355
383
410
386
432
473
511
547
7.7
8.6
9.6
10.6
11.0
10.1
11.5
12.5
13.4
14.4
15.4
17.3
18.7
20.2
21.6
23.0
25.9
28.3
30.7
32.6
31.2
34.6
37.9
40.8
43.7
46.1
51.8
56.6
61.0
65.3
61.9
69.1
75.8
82.1
87.4
77.3
86.4
94.6
102
109
93.1
104
114
123
132
124
138
152
164
175
155
173
190
205
219
232
259
284
307
328
309
346
379
409
437
6.4
7.2
8.0
8.8
9.2
8.4
9.6
10.4
11.2
12.0
12.8
14.4
15.6
16.8
18.0
19.2
21.6
23.6
25.6
27.2
26.0
28.8
31.6
34.0
36.4
38.4
43.2
47.2
50.8
54.4
51.6
57.6
63.2
68.4
72.8
64.4
72.0
78.8
85.2
90.8
77.6
86.4
94.8
102
110
103
115
126
136
146
129
144
158
171
182
193
216
237
256
274
258
288
316
341
364
5.5
6.2
6.9
7.5
7.9
7.2
8.2
8.9
9.6
10.3
11.0
12.3
13.4
14.4
15.4
16.5
18.5
20.2
21.9
23.3
22.3
24.7
27.1
29.1
31.2
32.9
37.0
40.5
43.5
46.6
44.2
49.4
54.2
58.6
62.4
55.2
61.7
67.5
73.0
77.8
66.5
74.1
81.3
87.8
93.9
88.5
98.7
108
117
125
111
124
135
146
156
166
185
203
219
235
221
247
271
292
312
Note: Always double check your application rates. See pages 149-163 for useful formulas and information.
†Available in all brass, stainless steel, and hardened stainless steel only.
Spacing
Spray
Height
Optimum Spray Height
50 cm
65°
90 cm
80°
75 cm
110°
50 cm
Reference technical section page 149
for more information.
How to order:
Specify tip number.
Examples:
TP8002-VS
– Stainless Steel with
VisiFlo color-coding
TP11002-VP – Polymer with VisiFlo
color-coding
TP11001-VK – Ceramic with VisiFlo
polymer color-coding
TP11002-HSS – Hardened
Stainless Steel
TP8002-SS
– Stainless Steel
TP8002
– Brass
TP11004-VB – Brass with VisiFlo
color-coding
BROADCAST NOZZLES
24/32
15
VisiFlo® Flat Spray Tips
Features:
■
Tapered edge flat spray pattern for uniform
coverage in broadcast spraying.
■
VisiFlo color-coded version available in
stainless steel, ceramic and polymer in
80° or 110° spray angles in selected sizes.
■
Available in ceramic 80° capacities
01– 03 and 110° capacities 01– 02.
See XR and XRC TeeJet® tips on
pages 10 and 11 for larger capacities.
■
Available in brass in 110° spray angle
only with VisiFlo color-coding.
TP650050†
TP800050†
TP1100050†
(100)
TP650067†
TP800067†
TP1100067†
(100)
TP6501†
TP8001
TP11001
(100)
TP65015†
TP80015
TP110015
(100)
TP6502†
TP8002
TP11002
(50)
TP6503†
TP8003
TP11003
(50)
TP6504†
TP8004
TP11004
(50)
TP6505†
TP8005
TP11005
(50)
TP6506†
TP8006
TP11006
(50)
TP6508†
TP8008
TP11008
(50)
TP6510†
TP8010†
TP11010†
(24)
TP6515†
TP8015†
TP11015†
TP6520†
TP8020†
TP11020†
PSI
CAPACITY
ONE
NOZZLE
IN GPM
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
30
35
40
50
60
0.043
0.047
0.050
0.056
0.061
0.058
0.063
0.067
0.075
0.082
0.087
0.094
0.10
0.11
0.12
0.13
0.14
0.15
0.17
0.18
0.17
0.19
0.20
0.22
0.24
0.26
0.28
0.30
0.34
0.37
0.35
0.37
0.40
0.45
0.49
0.43
0.47
0.50
0.56
0.61
0.52
0.56
0.60
0.67
0.73
0.69
0.75
0.80
0.89
0.98
0.87
0.94
1.00
1.12
1.22
1.30
1.40
1.50
1.68
1.84
1.73
1.87
2.00
2.24
2.45
CAPACITY
ONE
NOZZLE
IN
OZ./MIN.
5.5
6.0
6.4
7.2
7.8
7.4
8.1
8.6
9.6
10
11
12
13
14
15
17
18
19
22
23
22
24
26
28
31
33
36
38
44
47
45
47
51
58
63
55
60
64
72
78
67
72
77
86
93
88
96
102
114
125
111
120
128
143
156
166
179
192
215
236
221
239
256
287
314
■
Standard version (not color-coded)
available in 15°, 25°, 40°, 50° and
65° spray angles in brass, stainless
steel or hardened stainless steel.
■
See page 33 for TeeJet even
flat spray tips.
■
Automatic spray alignment with
25612-*-NYR Quick TeeJet® cap
and gasket. Reference page
55 for more information.
■
Automatic spray alignment for sizes
10 thru 20 with 25610-*-NYR Quick
TeeJet cap and gasket. Reference
page 55 for more information.
20⬙
GALLONS PER 1000 SQ. FT.
GPA
4 MPH
5 MPH
6 MPH
3.2
3.5
3.7
4.2
4.5
4.3
4.7
5.0
5.6
6.1
6.5
7.0
7.4
8.2
8.9
9.7
10.4
11.1
12.6
13.4
12.6
14.1
14.9
16.3
17.8
19.3
21
22
25
27
26
27
30
33
36
32
35
37
42
45
39
42
45
50
54
51
56
59
66
73
65
70
74
83
91
97
104
111
125
137
128
139
149
166
182
2.6
2.1
2.8
2.3
3.0
2.5
3.3
2.8
3.6
3.0
3.4
2.9
3.7
3.1
4.0
3.3
4.5
3.7
4.9
4.1
5.2
4.3
5.6
4.7
5.9
5.0
6.5
5.4
7.1
5.9
7.7
6.4
8.3
6.9
8.9
7.4
10.1
8.4
10.7
8.9
10.1
8.4
11.3
9.4
11.9
9.9
13.1 10.9
14.3 11.9
15.4 12.9
16.6 13.9
17.8 14.9
20
16.8
22
18.3
21
17.3
22
18.3
24
19.8
27
22
29
24
26
21
28
23
30
25
33
28
36
30
31
26
33
28
36
30
40
33
43
36
41
34
45
37
48
40
53
44
58
49
52
43
56
47
59
50
67
55
72
60
77
64
83
69
89
74
100
83
109
91
103
86
111
93
119
99
133
111
146
121
8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH
3 MPH
4 MPH
5 MPH
1.6
1.7
1.9
2.1
2.3
2.2
2.3
2.5
2.8
3.0
3.2
3.5
3.7
4.1
4.5
4.8
5.2
5.6
6.3
6.7
6.3
7.1
7.4
8.2
8.9
9.7
10.4
11.1
12.6
13.7
13.0
13.7
14.9
16.7
18.2
16.0
17.4
18.6
21
23
19.3
21
22
25
27
26
28
30
33
36
32
35
37
42
45
48
52
56
62
68
64
69
74
83
91
0.10
0.11
0.11
0.13
0.14
0.13
0.14
0.15
0.17
0.19
0.20
0.21
0.23
0.25
0.27
0.29
0.32
0.34
0.39
0.41
0.39
0.43
0.45
0.50
0.54
0.59
0.63
0.68
0.77
0.84
0.79
0.84
0.91
1.0
1.1
0.97
1.1
1.1
1.3
1.4
1.2
1.3
1.4
1.5
1.7
1.6
1.7
1.8
2.0
2.2
2.0
2.1
2.3
2.5
2.8
2.9
3.2
3.4
3.8
4.2
3.9
4.2
4.5
5.1
5.6
0.07
0.08
0.09
0.10
0.10
0.10
0.11
0.11
0.13
0.14
0.15
0.16
0.17
0.19
0.20
0.22
0.24
0.26
0.29
0.31
0.29
0.32
0.34
0.37
0.41
0.44
0.48
0.51
0.58
0.63
0.60
0.63
0.68
0.77
0.83
0.73
0.80
0.85
0.95
1.0
0.88
0.95
1.0
1.1
1.2
1.2
1.3
1.4
1.5
1.7
1.5
1.6
1.7
1.9
2.1
2.2
2.4
2.6
2.9
3.1
2.9
3.2
3.4
3.8
4.2
0.06
0.06
0.07
0.08
0.08
0.08
0.09
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.18
0.19
0.20
0.23
0.24
0.23
0.26
0.27
0.30
0.33
0.35
0.38
0.41
0.46
0.50
0.48
0.50
0.54
0.61
0.67
0.58
0.64
0.68
0.76
0.83
0.71
0.76
0.82
0.91
0.99
0.94
1.0
1.1
1.2
1.3
1.2
1.3
1.4
1.5
1.7
1.8
1.9
2.0
2.3
2.5
2.4
2.5
2.7
3.0
3.3
1.3
1.4
1.5
1.7
1.8
1.7
1.9
2.0
2.2
2.4
2.6
2.8
3.0
3.3
3.6
3.9
4.2
4.5
5.0
5.3
5.0
5.6
5.9
6.5
7.1
7.7
8.3
8.9
10.1
11.0
10.4
11.0
11.9
13.4
14.6
12.8
14.0
14.9
16.6
18.1
15.4
16.6
17.8
19.9
22
20
22
24
26
29
26
28
30
33
36
39
42
45
50
55
51
56
59
67
73
1.1
1.2
1.2
1.4
1.5
1.4
1.6
1.7
1.9
2.0
2.2
2.3
2.5
2.7
3.0
3.2
3.5
3.7
4.2
4.5
4.2
4.7
5.0
5.4
5.9
6.4
6.9
7.4
8.4
9.2
8.7
9.2
9.9
11.1
12.1
10.6
11.6
12.4
13.9
15.1
12.9
13.9
14.9
16.6
18.1
17.1
18.6
19.8
22
24
22
23
25
28
30
32
35
37
42
46
43
46
50
55
61
0.85
0.93
0.99
1.1
1.2
1.1
1.2
1.3
1.5
1.6
1.7
1.9
2.0
2.2
2.4
2.6
2.8
3.0
3.4
3.6
3.4
3.8
4.0
4.4
4.8
5.1
5.5
5.9
6.7
7.3
6.9
7.3
7.9
8.9
9.7
8.5
9.3
9.9
11.1
12.1
10.3
11.1
11.9
13.3
14.5
13.7
14.9
15.8
17.6
19.4
17.2
18.6
19.8
22
24
26
28
30
33
36
34
37
40
44
49
0.64
0.70
0.74
0.83
0.91
0.86
0.94
0.99
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.5
2.7
2.5
2.8
3.0
3.3
3.6
3.9
4.2
4.5
5.0
5.5
5.2
5.5
5.9
6.7
7.3
6.4
7.0
7.4
8.3
9.1
7.7
8.3
8.9
9.9
10.8
10.2
11.1
11.9
13.2
14.6
12.9
14.0
14.9
16.6
18.1
19.3
21
22
25
27
26
28
30
33
36
0.15
0.16
0.17
0.19
0.21
0.20
0.21
0.23
0.26
0.28
0.30
0.32
0.34
0.37
0.41
0.44
0.48
0.51
0.58
0.61
0.58
0.65
0.68
0.75
0.82
0.88
0.95
1.0
1.2
1.3
1.2
1.3
1.4
1.5
1.7
1.5
1.6
1.7
1.9
2.1
1.8
1.9
2.0
2.3
2.5
2.3
2.6
2.7
3.0
3.3
3.0
3.2
3.4
3.8
4.1
4.4
4.8
5.1
5.7
6.3
5.9
6.4
6.8
7.6
8.3
Note: Always double check your application rates. See pages 149-163 for useful formulas and information.
†Available in all brass, stainless steel, and hardened stainless steel only.
Spacing
Spray
Height
Optimum Spray Height
20⬙
65°
35⬙
80°
30⬙
110°
20⬙
Reference technical section page 149
for more information.
How to order:
Specify tip number.
Examples:
TP8002-VS
– Stainless Steel with
VisiFlo color-coding
TP11002-VP – Polymer with VisiFlo
color-coding
TP11001-VK – Ceramic with VisiFlo
polymer color-coding
TP11002-HSS – Hardened
Stainless Steel
TP8002-SS
– Stainless Steel
TP8002
– Brass
TP11004-VB – Brass with VisiFlo
color-coding
BROADCAST NOZZLES
25/32
15
Boomless Flat Spray Nozzles
Typical Applications:
Features:
n
Boomless field spray applications.
n
Roadside and right-of-way applications.
n
End row spraying.
n
Orchard spraying.
n
De-icing applications.
n
Forestry.
n
Unique orifice geometry produces a wide
spray pattern while maintaining superior
distribution across entire width.
n
Pre-orifice design minimizes drift.
n
Extra wide spray pattern — up to
18.5 feet (5.5 meters)— using a
single nozzle.
n
Removable polymer pre-orifice.
n
Acetal or stainless steel construction
for excellent chemical resistance.
n
Recommended spray pressure range:
20–60 PSI (1.5–4 bar).
“X”
“X”
“L”
“C”
“R”
“Y”
“W”
l/ha foR THRee nozzLes
CenTeR
nozzLe
“C”
bar
“R”, “L”
(B)1/4XP10R
1/4TTJ08
(B)1/4XP10L
(B)1/4XP20R
1/4TTJ08
(B)1/4XP20L
(B)1/4XP25R
1/4TTJ10
(B)1/4XP25L
(B)1/2XP40R
1/4TTJ15
(B)1/2XP40L
DRoP
size
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
CaPaCiTy
THRee
nozzLes
in l/min
7.85
9.04
11.1
12.2
13.2
13.4
15.4
18.9
20.7
22.3
16.5
19.1
23.5
25.6
27.5
26.6
31.0
37.7
40.8
44.4
nozzLe sPaCing “X” = 50 cm
sPRay wiDTH
“w” (meters)
HeigHT “y” = 60 cm
HeigHT “y” = 90 cm
60 cm
HeigHT
90 cm
HeigHT
4
km/h
8
km/h
12
km/h
16
km/h
24
km/h
32
km/h
4
km/h
8
km/h
12
km/h
16
km/h
24
km/h
32
km/h
6.2
7.0
7.8
8.6
9.0
6.4
8.0
9.2
9.8
10.2
7.4
8.4
9.2
9.8
10.2
7.8
9.0
9.6
10.2
10.8
7.0
7.8
8.6
9.2
9.8
7.8
8.4
9.6
10.2
10.8
7.8
9.2
9.8
10.2
10.8
8.4
9.8
10.4
10.8
11.6
190
194
213
213
220
314
289
308
317
328
334
341
383
392
404
512
517
589
600
617
95.0
96.9
107
106
110
157
144
154
158
164
167
171
192
196
202
256
258
295
300
308
63.3
64.6
71.2
70.9
73.3
105
96.3
103
106
109
111
114
128
131
135
171
172
196
200
206
47.5
48.4
53.4
53.2
55.0
78.5
72.2
77.0
79.2
82.0
83.6
85.3
95.8
98.0
101
128
129
147
150
154
31.7
32.3
35.6
35.5
36.7
52.3
48.1
51.4
52.8
54.7
55.7
56.8
63.9
65.3
67.4
85.3
86.1
98.2
100
103
23.7
24.2
26.7
26.6
27.5
39.3
36.1
38.5
39.6
41.0
41.8
42.6
47.9
49.0
50.6
63.9
64.6
73.6
75.0
77.1
168
174
194
199
202
258
275
295
304
310
317
311
360
376
382
475
474
544
567
574
84.1
86.9
96.8
99.5
101
129
138
148
152
155
159
156
180
188
191
238
237
272
283
287
56.1
57.9
64.5
66.3
67.3
85.9
91.7
98.4
101
103
106
104
120
125
127
158
158
181
189
191
42.1
43.5
48.4
49.7
50.5
64.4
68.8
73.8
76.1
77.4
79.3
77.9
89.9
94.1
95.5
119
119
136
142
144
28.0
29.0
32.3
33.2
33.7
42.9
45.8
49.2
50.7
51.6
52.9
51.9
59.9
62.7
63.7
79.2
79.1
90.6
94.4
95.7
21.0
21.7
24.2
24.9
25.3
32.2
34.4
36.9
38.1
38.7
39.7
38.9
45.0
47.1
47.7
59.4
59.3
68.0
70.8
71.8
l/ha foR THRee nozzLes
CenTeR
nozzLe
“C”
“R”, “L”
(B)1/4XP10R 1/4TTJ06
(B)1/4XP10L
(50)
(B)1/4XP20R 1/4TTJ06
(B)1/4XP20L
(50)
(B)1/4XP25R
1/4TTJ08
(B)1/4XP25L
(B)1/2XP40R
1/4TTJ10
(B)1/2XP40L
(B)1/2XP80R
1/4TTJ15
(B)1/2XP80L
bar
DRoP
size
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
CaPaCiTy
THRee
nozzLes
in l/min
7.30
8.40
10.3
11.3
12.2
12.8
14.8
18.1
19.8
21.3
15.9
18.5
22.7
24.7
26.5
25.2
29.4
35.8
38.6
41.9
48.4
55.8
68.1
73.2
79.2
nozzLe sPaCing “X” = 75 cm
sPRay wiDTH
“w” (meters)
HeigHT “y” = 60 cm
90 cm
HeigHT
4
km/h
8
km/h
12
km/h
16
km/h
24
km/h
32
km/h
4
km/h
8
km/h
12
km/h
16
km/h
24
km/h
32
km/h
6.7
7.5
8.3
9.1
9.5
6.9
8.5
9.7
10.3
10.7
7.9
8.9
9.7
10.3
10.7
8.3
9.5
10.1
10.7
11.3
9.5
10.7
11.3
11.5
12.1
7.5
8.3
9.1
9.7
10.3
8.3
8.9
10.1
10.7
11.3
8.3
9.7
10.3
10.7
11.3
8.9
10.3
10.9
11.3
12.1
10.9
11.5
12.1
12.5
12.7
163
168
186
186
193
278
261
280
288
299
302
312
351
360
371
455
464
532
541
556
764
782
904
955
982
81.7
84.0
93.1
93.1
96.3
139
131
140
144
149
151
156
176
180
186
228
232
266
271
278
382
391
452
477
491
54.5
56.0
62.0
62.1
64.2
92.8
87.1
93.3
96.1
99.5
101
104
117
120
124
152
155
177
180
185
255
261
301
318
327
40.9
42.0
46.5
46.6
48.2
69.6
65.3
70.0
72.1
74.6
75.5
77.9
87.8
89.9
92.9
114
116
133
135
139
191
196
226
239
245
27.2
28.0
31.0
31.0
32.1
46.4
43.5
46.6
48.1
49.8
50.3
52.0
58.5
60.0
61.9
75.9
77.4
88.6
90.2
92.7
127
130
151
159
164
20.4
21.0
23.3
23.3
24.1
34.8
32.6
35.0
36.0
37.3
37.7
39.0
43.9
45.0
46.4
56.9
58.0
66.5
67.6
69.5
95.5
97.8
113
119
123
146
152
170
175
178
231
249
269
278
283
287
286
331
346
352
425
428
493
512
519
666
728
844
878
935
73.0
75.9
84.9
87.4
88.8
116
125
134
139
141
144
143
165
173
176
212
214
246
256
260
333
364
422
439
468
48.7
50.6
56.6
58.2
59.2
77.1
83.1
89.6
92.5
94.2
95.8
95.4
110
115
117
142
143
164
171
173
222
243
281
293
312
36.5
38.0
42.4
43.7
44.4
57.8
62.4
67.2
69.4
70.7
71.8
71.5
82.6
86.6
87.9
106
107
123
128
130
167
182
211
220
234
24.3
25.3
28.3
29.1
29.6
38.6
41.6
44.8
46.3
47.1
47.9
47.7
55.1
57.7
58.6
70.8
71.4
82.1
85.4
86.6
111
121
141
146
156
18.3
19.0
21.2
21.8
22.2
28.9
31.2
33.6
34.7
35.3
35.9
35.8
41.3
43.3
44.0
53.1
53.5
61.6
64.0
64.9
83.3
91.0
106
110
117
Medium
Coarse
Very Extremely
Coarse
Coarse
note: Always double check your application rates.
Tabulations are based on spraying water at 70°F (21°C).
See pages 173–187 for drop size classification, useful formulas and information.
32
HeigHT “y” = 90 cm
60 cm
HeigHT
(B)=BSPT
Very
Fine
BOOMLESS NOZZLES
26/32
Fine
Boomless Flat Spray Nozzles
n
NPT or BSPT (male) threads for
easy installation.
n
Color-coding for easy capacity
identification.
How to order:
Specify part number.
Example:
(B)1/2XP80L(R)-VS – VisiFlo® Stainless
Steel left boom spray
“X”
“L”
“R”
“Y”
“W”
sPRay wiDTH
CaPaCiTy “w” (meters)
bar
Two
DRoP
size nozzLe
in l/min
“R”, “L”
(B)1/4XP10R
(B)1/4XP10L
(B)1/4XP20R
(B)1/4XP20L
(B)1/4XP25R
(B)1/4XP25L
(B)1/2XP40R
(B)1/2XP40L
(B)1/2XP80R
(B)1/2XP80L
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
5.62
6.46
7.90
8.52
9.10
11.1
12.9
15.7
17.0
18.2
13.7
15.9
19.5
21.0
22.4
22.4
26.2
31.8
34.0
36.8
44.2
51.0
62.2
66.4
71.6
nozzLe sPaCing “X” = 0–7 cm
l/ha foR Two nozzLes
HeigHT “y” = 60 cm
60 cm 90 cm
HeigHT HeigHT
5.2
6.0
6.8
7.6
8.0
5.4
7.0
8.2
8.8
9.2
6.4
7.4
8.2
8.8
9.2
6.8
8.0
8.6
9.2
9.8
8.0
9.2
9.8
10.0
10.6
6.0
6.8
7.6
8.2
8.8
6.8
7.4
8.6
9.2
9.8
6.8
8.2
8.8
9.2
9.8
7.4
8.8
9.4
9.8
10.6
9.4
10.0
10.6
11.0
11.2
HeigHT “y” = 90 cm
4
6
8
10
12
16
20
25
30
35
4
6
8
10
12
16
20
25
30
35
km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h
162
162
174
168
171
308
276
287
290
297
321
322
357
358
365
494
491
555
554
563
829
832
952
996
1013
108
108
116
112
114
206
184
191
193
198
214
215
238
239
243
329
328
370
370
376
553
554
635
664
675
81.1
80.8
87.1
84.1
85.3
154
138
144
145
148
161
161
178
179
183
247
246
277
277
282
414
416
476
498
507
64.8
64.6
69.7
67.3
68.3
123
111
115
116
119
128
129
143
143
146
198
197
222
222
225
332
333
381
398
405
54.0
53.8
58.1
56.1
56.9
103
92.1
95.7
96.6
98.9
107
107
119
119
122
165
164
185
185
188
276
277
317
332
338
40.5
40.4
43.6
42.0
42.7
77.1
69.1
71.8
72.4
74.2
80.3
80.6
89.2
89.5
91.3
124
123
139
139
141
207
208
238
249
253
32.4
32.3
34.9
33.6
34.1
61.7
55.3
57.4
58.0
59.3
64.2
64.5
71.3
71.6
73.0
98.8
98.3
111
111
113
166
166
190
199
203
25.9
25.8
27.9
26.9
27.3
49.3
44.2
46.0
46.4
47.5
51.4
51.6
57.1
57.3
58.4
79.1
78.6
88.7
88.7
90.1
133
133
152
159
162
21.6 18.5
21.5 18.5
23.2 19.9
22.4 19.2
22.8 19.5
41.1 35.2
36.9 31.6
38.3 32.8
38.6 33.1
39.6 33.9
42.8 36.7
43.0 36.8
47.6 40.8
47.7 40.9
48.7 41.7
65.9 56.5
65.5 56.1
74.0 63.4
73.9 63.4
75.1 64.4
111
94.7
111
95.0
127
109
133
114
135
116
141
143
156
156
155
245
261
274
277
279
302
291
332
342
343
454
447
507
520
521
705
765
880
905
959
93.7
95.0
104
104
103
163
174
183
185
186
201
194
222
228
229
303
298
338
347
347
470
510
587
604
639
70.3
71.3
78.0
77.9
77.6
122
131
137
139
139
151
145
166
171
171
227
223
254
260
260
353
383
440
453
479
56.2
57.0
62.4
62.3
62.0
97.9
105
110
111
111
121
116
133
137
137
182
179
203
208
208
282
306
352
362
384
46.8
47.5
52.0
52.0
51.7
81.6
87.2
91.3
92.4
92.9
101
97.0
111
114
114
151
149
169
173
174
235
255
293
302
320
note: Always double check your application rates.
Tabulations are based on spraying water at 70°F (21°C).
See pages 173–187 for drop size classification, useful formulas and information.
35.1
35.6
39.0
39.0
38.8
61.2
65.4
68.5
69.3
69.6
75.6
72.7
83.1
85.6
85.7
114
112
127
130
130
176
191
220
226
240
28.1
28.5
31.2
31.2
31.0
49.0
52.3
54.8
55.4
55.7
60.4
58.2
66.5
68.5
68.6
90.8
89.3
101
104
104
141
153
176
181
192
22.5
22.8
24.9
24.9
24.8
39.2
41.8
43.8
44.3
44.6
48.4
46.5
53.2
54.8
54.9
72.6
71.5
81.2
83.3
83.3
113
122
141
145
153
18.7 16.1
19.0 16.3
20.8 17.8
20.8 17.8
20.7 17.7
32.6 28.0
34.9 29.9
36.5 31.3
37.0 31.7
37.1 31.8
40.3 34.5
38.8 33.2
44.3 38.0
45.7 39.1
45.7 39.2
60.5 51.9
59.5 51.0
67.7 58.0
69.4 59.5
69.4 59.5
94.0 80.6
102
87.4
117
101
121
103
128
110
“R”, “L”
“Y”
“W”
CaPaCiTy
bar
(B)1/4XP10R
(B)1/4XP10L
(B)1/4XP20R
(B)1/4XP20L
(B)1/4XP25R
(B)1/4XP25L
(B)1/2XP40R
(B)1/2XP40L
(B)1/2XP80R
(B)1/2XP80L
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
1.5
2.0
3.0
3.5
4.0
one
DRoP
size nozzLe
in l/min
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
2.81
3.23
3.95
4.26
4.55
5.56
6.43
7.87
8.52
9.12
6.85
7.95
9.77
10.5
11.2
11.2
13.1
15.9
17.0
18.4
22.1
25.5
31.1
33.2
35.8
sPRay wiDTH
“w” (meters)
nozzLe sPaCing “X” = 0–7 cm
l/ha foR singLe nozzLe
HeigHT “y” = 60 cm
60 cm 90 cm
HeigHT HeigHT
2.6
3.0
3.4
3.8
4.0
2.7
3.5
4.1
4.4
4.6
3.2
3.7
4.1
4.4
4.6
3.4
4.0
4.3
4.6
4.9
4.0
4.6
4.9
5.0
5.3
3.0
3.4
3.8
4.1
4.4
3.4
3.7
4.3
4.6
4.9
3.4
4.1
4.4
4.6
4.9
3.7
4.4
4.7
4.9
5.3
4.7
5.0
5.3
5.5
5.6
HeigHT “y” = 90 cm
4
6
8
10
12
16
20
25
30
35
4
6
8
10
12
16
20
25
30
35
km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h
162
162
174
168
171
309
276
288
290
297
321
322
357
358
365
494
491
555
554
563
829
832
952
996
1013
108
108
116
112
114
206
184
192
194
198
214
215
238
239
243
329
328
370
370
376
553
554
635
664
675
81.1
80.8
87.1
84.1
85.3
154
138
144
145
149
161
161
179
179
183
247
246
277
277
282
414
416
476
498
507
64.8
64.6
69.7
67.3
68.3
124
110
115
116
119
128
129
143
143
146
198
197
222
222
225
332
333
381
398
405
54.0
53.8
58.1
56.1
56.9
103
91.9
96.0
96.8
99.1
107
107
119
119
122
165
164
185
185
188
276
277
317
332
338
40.5
40.4
43.6
42.0
42.7
77.2
68.9
72.0
72.6
74.3
80.3
80.6
89.4
89.5
91.3
124
123
139
139
141
207
208
238
249
253
32.4
32.3
34.9
33.6
34.1
61.8
55.1
57.6
58.1
59.5
64.2
64.5
71.5
71.6
73.0
98.8
98.3
111
111
113
166
166
190
199
203
note: Always double check your application rates.
Tabulations are based on spraying water at 70°F (21°C).
See pages 173–187 for drop size classification, useful formulas and information.
25.9
25.8
27.9
26.9
27.3
49.4
44.1
46.1
46.5
47.6
51.4
51.6
57.2
57.3
58.4
79.1
78.6
88.7
88.7
90.1
133
133
152
159
162
21.6 18.5
21.5 18.5
23.2 19.9
22.4 19.2
22.8 19.5
41.2 35.3
36.7 31.5
38.4 32.9
38.7 33.2
39.7 34.0
42.8 36.7
43.0 36.8
47.7 40.9
47.7 40.9
48.7 41.7
65.9 56.5
65.5 56.1
74.0 63.4
73.9 63.4
75.1 64.4
111
94.7
111
95.0
127
109
133
114
135
116
141
143
156
156
155
245
261
275
278
279
302
291
333
342
343
454
447
507
520
521
705
765
880
905
959
(B)=BSPT
93.7
95.0
104
104
103
164
174
183
185
186
201
194
222
228
229
303
298
338
347
347
470
510
587
604
639
70.3
71.3
78.0
77.9
77.6
123
130
137
139
140
151
145
167
171
171
227
223
254
260
260
353
383
440
453
479
Very
Fine
56.2
57.0
62.4
62.3
62.0
98.1
104
110
111
112
121
116
133
137
137
182
179
203
208
208
282
306
352
362
384
46.8
47.5
52.0
52.0
51.7
81.8
86.9
91.5
92.6
93.1
101
97.0
111
114
114
151
149
169
173
174
235
255
293
302
320
Fine
35.1
35.6
39.0
39.0
38.8
61.3
65.2
68.6
69.5
69.8
75.6
72.7
83.3
85.6
85.7
114
112
127
130
130
176
191
220
226
240
28.1
28.5
31.2
31.2
31.0
49.1
52.1
54.9
55.6
55.8
60.4
58.2
66.6
68.5
68.6
90.8
89.3
101
104
104
141
153
176
181
192
Medium
Coarse
22.5
22.8
24.9
24.9
24.8
39.2
41.7
43.9
44.5
44.7
48.4
46.5
53.3
54.8
54.9
72.6
71.5
81.2
83.3
83.3
113
122
141
145
153
18.7 16.1
19.0 16.3
20.8 17.8
20.8 17.8
20.7 17.7
32.7 28.0
34.8 29.8
36.6 31.4
37.0 31.8
37.2 31.9
40.3 34.5
38.8 33.2
44.4 38.1
45.7 39.1
45.7 39.2
60.5 51.9
59.5 51.0
67.7 58.0
69.4 59.5
69.4 59.5
94.0 80.6
102
87.4
117
101
121
103
128
110
Very Extremely
Coarse
Coarse
BOOMLESS NOZZLES
27/32
33
Boomless Flat Spray Nozzles
Typical Applications:
Features:
n
Boomless field spray applications.
n
Roadside and right-of-way applications.
n
End row spraying.
n
Orchard spraying.
n
De-icing applications.
n
Forestry.
n
Unique orifice geometry produces a wide
spray pattern while maintaining superior
distribution across entire width.
n
Pre-orifice design minimizes drift.
n
Extra wide spray pattern — up to
18.5 feet (5.5 meters)— using a
single nozzle.
n
Removable polymer pre-orifice.
n
Acetal or stainless steel construction
for excellent chemical resistance.
n
Recommended spray pressure range:
20–60 PSI (1.5–4 bar).
“X”
“X”
“L”
“C”
“R”
“Y”
“W”
nozzLe spaCing “X” = 209
CenteR
nozzLe
“C”
psi
“R”, “L”
DRop
size
CapaCity
thRee
nozzLes
in gpM
height = 249
spRay wiDth
“w” (Feet)
249
height
gpa FoR thRee nozzLes
height = 369
gaLLons peR 1000 sQ. Ft.
gpa FoR thRee nozzLes
gaLLons peR 1000 sQ. Ft.
4
6
8
10
15
20
2
3
4
5
4
6
8
10
15
20
2
3
4
5
369
height Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph
(B)1/4Xp10R
1/4ttJ08
(B)1/4Xp10L
30
40
50
60
XC
XC
XC
XC
2.43
2.80
3.13
3.42
23.3
25.3
28.3
29.3
25.3
28.3
30.3
32.3
12.9
13.7
13.7
14.4
8.6
9.1
9.1
9.6
6.5
6.8
6.8
7.2
5.2
5.5
5.5
5.8
3.4
3.7
3.6
3.9
2.6
2.7
2.7
2.9
0.59
0.63
0.63
0.66
0.39
0.42
0.42
0.44
0.30
0.31
0.31
0.33
0.24
0.25
0.25
0.26
11.9
12.2
12.8
13.1
7.9
8.2
8.5
8.7
5.9
6.1
6.4
6.6
4.8
4.9
5.1
5.2
3.2
3.3
3.4
3.5
2.4
2.4
2.6
2.6
0.54
0.56
0.59
0.60
0.36
0.37
0.39
0.40
0.27
0.28
0.29
0.30
0.22
0.22
0.23
0.24
(B)1/4Xp20R
1/4ttJ08
(B)1/4Xp20L
30
40
50
60
XC
XC
XC
XC
4.19
4.80
5.39
5.98
26.3
30.3
32.3
33.3
27.3
31.3
33.3
35.3
19.7
19.6
21
22
13.1 9.9
13.1 9.8
13.8 10.3
14.8 11.1
7.9
7.8
8.3
8.9
5.3
5.2
5.5
5.9
3.9
3.9
4.1
4.4
0.90
0.90
0.95
1.0
0.60
0.60
0.63
0.68
0.45
0.45
0.47
0.51
0.36
0.36
0.38
0.41
19.0
19.0
20
21
12.7
12.7
13.4
14.0
9.5
9.5
10.0
10.5
7.6
7.6
8.0
8.4
5.1
5.1
5.3
5.6
3.8
3.8
4.0
4.2
0.87
0.87
0.92
0.96
0.58
0.58
0.61
0.64
0.43
0.43
0.46
0.48
0.35
0.35
0.37
0.38
(B)1/4Xp25R
1/4ttJ10
(B)1/4Xp25L
30
40
50
60
XC
XC
XC
XC
5.13
6.00
6.62
7.22
27.3
30.3
32.3
33.3
30.3
32.3
33.3
35.3
23
25
25
27
15.5
16.3
16.9
17.9
11.6 9.3
12.3 9.8
12.7 10.1
13.4 10.7
6.2
6.5
6.8
7.2
4.7
4.9
5.1
5.4
1.1
1.1
1.2
1.2
0.71
0.75
0.77
0.82
0.53
0.56
0.58
0.61
0.43
0.45
0.46
0.49
21
23
25
25
14.0
15.3
16.4
16.9
10.5 8.4
11.5 9.2
12.3 9.8
12.7 10.1
5.6
6.1
6.6
6.7
4.2
4.6
4.9
5.1
0.96
1.1
1.1
1.2
0.64
0.70
0.75
0.77
0.48
0.53
0.56
0.58
0.38
0.42
0.45
0.46
(B)1/2Xp40R
1/4ttJ15
(B)1/2Xp40L
30
40
50
60
XC
XC
XC
XC
8.36
9.50
10.8
11.8
29.3
31.3
33.3
35.3
32.3
34.3
35.3
38.3
35
38
40
41
24
25
27
28
17.7
18.8
20
21
14.1 9.4
15.0 10.0
16.1 10.7
16.5 11.0
7.1
7.5
8.0
8.3
1.6
1.7
1.8
1.9
1.1
1.1
1.2
1.3
0.81
0.86
0.92
0.95
0.65
0.69
0.74
0.76
32
34
38
38
21
23
25
25
16.0
17.1
18.9
19.1
12.8 8.5
13.7 9.1
15.1 10.1
15.3 10.2
6.4
6.9
7.6
7.6
1.5
1.6
1.7
1.7
0.98
1.0
1.2
1.2
0.73
0.78
0.87
0.87
0.59
0.63
0.69
0.70
nozzLe spaCing “X” = 309
CenteR
nozzLe
“C”
“R”, “L”
psi
DRop
size
CapaCity
thRee
nozzLes
in gpM
height = 249
spRay wiDth
“w” (Feet)
249
height
gpa FoR thRee nozzLes
gpa FoR thRee nozzLes
gaLLons peR 1000 sQ. Ft.
4
6
8
10
15
20
2
3
4
5
4
6
8
10
15
20
2
3
4
5
369
height Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph
(B)1/4Xp10R 1/4ttJ06
(50)
(B)1/4Xp10L
30
40
50
60
XC
XC
XC
XC
2.26
2.60
2.91
3.17
25.0
27.0
30.0
31.0
27.0
30.0
32.0
34.0
11.2
11.9
12.0
12.7
7.5
7.9
8.0
8.4
5.6
6.0
6.0
6.3
4.5
4.8
4.8
5.1
3.0
3.2
3.2
3.4
2.2
2.4
2.4
2.5
0.51
0.55
0.55
0.58
0.34
0.36
0.37
0.39
0.26
0.27
0.27
0.29
0.20
0.22
0.22
0.23
10.4
10.7
11.3
11.5
6.9
7.2
7.5
7.7
5.2
5.4
5.6
5.8
4.1
4.3
4.5
4.6
2.8
2.9
3.0
3.1
2.1
2.1
2.3
2.3
0.47
0.49
0.52
0.53
0.32
0.33
0.34
0.35
0.24
0.25
0.26
0.26
0.19
0.20
0.21
0.21
(B)1/4Xp20R 1/4ttJ06
(50)
(B)1/4Xp20L
30
40
50
60
XC
XC
XC
XC
4.02
4.60
5.17
5.73
28.0
32.0
34.0
35.0
29.0
33.0
35.0
37.0
17.8
17.8
18.8
20
11.8 8.9
11.9 8.9
12.5 9.4
13.5 10.1
7.1
7.1
7.5
8.1
4.7
4.7
5.0
5.4
3.6
3.6
3.8
4.1
0.81
0.81
0.86
0.93
0.54
0.54
0.57
0.62
0.41
0.41
0.43
0.46
0.33
0.33
0.34
0.37
17.2
17.3
18.3
19.2
11.4
11.5
12.2
12.8
8.6
8.6
9.1
9.6
6.9
6.9
7.3
7.7
4.6
4.6
4.9
5.1
3.4
3.5
3.7
3.8
0.79
0.79
0.84
0.88
0.52
0.53
0.56
0.59
0.39
0.39
0.42
0.44
0.31
0.32
0.33
0.35
(B)1/4Xp25R
1/4ttJ08
(B)1/4Xp25L
30
40
50
60
XC
XC
XC
XC
4.95
5.80
6.39
6.98
29.0
32.0
34.0
35.0
32.0
34.0
35.0
37.0
21
22
23
25
14.1
15.0
15.5
16.5
10.6
11.2
11.6
12.3
8.4
9.0
9.3
9.9
5.6
6.0
6.2
6.6
4.2
4.5
4.7
4.9
0.97
1.0
1.1
1.1
0.64
0.68
0.71
0.75
0.48
0.51
0.53
0.57
0.39
0.41
0.43
0.45
19.1
21
23
23
12.8 9.6
14.1 10.6
15.1 11.3
15.6 11.7
7.7
8.4
9.0
9.3
5.1
5.6
6.0
6.2
3.8
4.2
4.5
4.7
0.88
0.97
1.0
1.1
0.58
0.64
0.69
0.71
0.44
0.48
0.52
0.53
0.35
0.39
0.41
0.43
(B)1/2Xp40R
1/4ttJ10
(B)1/2Xp40L
30
40
50
60
XC
XC
XC
XC
7.93
9.00
10.2
11.2
31.0
33.0
35.0
37.0
34.0
36.0
37.0
40.0
32
34
36
37
21
23
24
25
15.8
16.9
18.0
18.7
12.7 8.4
13.5 9.0
14.4 9.6
15.0 10.0
6.3
6.8
7.2
7.5
1.4
1.5
1.7
1.7
0.97
1.0
1.1
1.1
0.72
0.77
0.83
0.86
0.58
0.62
0.66
0.69
29
31
34
35
19.2
21
23
23
14.4
15.5
17.1
17.3
11.5
12.4
13.6
13.9
7.7
8.3
9.1
9.2
5.8
6.2
6.8
6.9
1.3
1.4
1.6
1.6
0.88
0.94
1.0
1.1
0.66
0.71
0.78
0.79
0.53
0.57
0.62
0.63
(B)1/2Xp80R
1/4ttJ15
(B)1/2Xp80L
30
40
50
60
XC
XC
XC
XC
15.0
17.5
19.1
21.0
35.0
37.0
38.0
40.0
38.0
40.0
41.0
42.0
53
59
62
65
35
39
41
43
27
29
31
32
21
23
25
26
10.6
11.7
12.4
13.0
2.4
2.7
2.8
3.0
1.6
1.8
1.9
2.0
1.2
1.3
1.4
1.5
0.97
1.1
1.1
1.2
49
54
58
62
33
36
38
41
24
27
29
31
19.5
22
23
25
13.0 9.8
14.4 10.8
15.4 11.5
16.5 12.4
2.2
2.5
2.6
2.8
1.5
1.7
1.8
1.9
1.1
1.2
1.3
1.4
0.89
0.99
1.1
1.1
14.1
15.6
16.6
17.3
note: Always double check your application rates.
Tabulations are based on spraying water at 70°F (21°C).
See pages 173–187 for drop size classification, useful formulas and information.
32
height = 369
gaLLons peR 1000 sQ. Ft.
(B)=BSPT
Very
Fine
BOOMLESS NOZZLES
28/32
Fine
Medium
Coarse
Very Extremely
Coarse
Coarse
Boomless Flat Spray Nozzles
n
NPT or BSPT (male) threads for
easy installation.
n
Color-coding for easy capacity
identification.
how to order:
Specify part number.
Example:
(B)1/2XP80L(R)-VS – VisiFlo® Stainless
Steel left boom spray
“X”
“L”
“R”
“Y”
“W”
spRay wiDth
CapaCity
“w” (Feet)
psi
two
DRop
size nozzLe
in gpM
“R”, “L”
(B)1/4Xp10R
(B)1/4Xp10L
(B)1/4Xp20R
(B)1/4Xp20L
(B)1/4Xp25R
(B)1/4Xp25L
(B)1/2Xp40R
(B)1/2Xp40L
(B)1/2Xp80R
(B)1/2Xp80L
20
30
40
50
60
20
30
40
50
60
20
30
40
50
60
20
30
40
50
60
20
30
40
50
60
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
1.42
1.74
2.00
2.24
2.44
2.84
3.50
4.00
4.50
5.00
3.48
4.26
5.00
5.50
6.00
5.74
7.06
8.00
9.10
10.0
11.2
13.7
16.0
17.5
19.2
249
369
height height
17.0
20.0
22.0
25.0
26.0
18.0
23.0
27.0
29.0
30.0
21.0
24.0
27.0
29.0
30.0
22.0
26.0
28.0
30.0
32.0
26.0
30.0
32.0
33.0
35.0
20.0
22.0
25.0
27.0
29.0
22.0
24.0
28.0
30.0
32.0
22.0
27.0
29.0
30.0
32.0
24.0
29.0
31.0
32.0
35.0
31.0
33.0
35.0
36.0
37.0
nozzLe spaCing “X” = 0–39
nozzLe spaCing “X” = 0–39
249
gpa FoR two nozzLes
gaLLons peR 1000 sQ. Ft.
gpa FoR two nozzLes
369
gaLLons peR 1000 sQ. Ft.
4
Mph
6
Mph
8
Mph
10
Mph
15
Mph
20
Mph
2
Mph
3
Mph
4
Mph
5
Mph
4
Mph
6
Mph
8
Mph
10
Mph
15
Mph
20
Mph
2
Mph
3
Mph
4
Mph
5
Mph
10.3
10.8
11.3
11.1
11.6
19.5
18.8
18.3
19.2
21
21
22
23
23
25
32
34
35
38
39
53
57
62
66
68
6.9
7.2
7.5
7.4
7.7
13.0
12.6
12.2
12.8
13.8
13.7
14.6
15.3
15.6
16.5
22
22
24
25
26
36
38
41
44
45
5.2
5.4
5.6
5.5
5.8
9.8
9.4
9.2
9.6
10.3
10.3
11.0
11.5
11.7
12.4
16.1
16.8
17.7
18.8
19.3
27
28
31
33
34
4.1
4.3
4.5
4.4
4.6
7.8
7.5
7.3
7.7
8.3
8.2
8.8
9.2
9.4
9.9
12.9
13.4
14.1
15.0
15.5
21
23
25
26
27
2.8
2.9
3.0
3.0
3.1
5.2
5.0
4.9
5.1
5.5
5.5
5.9
6.1
6.3
6.6
8.6
9.0
9.4
10.0
10.3
14.2
15.1
16.5
17.5
18.1
2.1
2.2
2.3
2.2
2.3
3.9
3.8
3.7
3.8
4.1
4.1
4.4
4.6
4.7
5.0
6.5
6.7
7.1
7.5
7.7
10.7
11.3
12.4
13.1
13.6
0.47
0.49
0.52
0.51
0.53
0.89
0.86
0.84
0.88
0.94
0.94
1.0
1.0
1.1
1.1
1.5
1.5
1.6
1.7
1.8
2.4
2.6
2.8
3.0
3.1
0.32
0.33
0.34
0.34
0.35
0.60
0.57
0.56
0.59
0.63
0.63
0.67
0.70
0.72
0.76
0.99
1.0
1.1
1.1
1.2
1.6
1.7
1.9
2.0
2.1
0.24
0.25
0.26
0.25
0.27
0.45
0.43
0.42
0.44
0.47
0.47
0.50
0.52
0.54
0.57
0.74
0.77
0.81
0.86
0.89
1.2
1.3
1.4
1.5
1.6
0.19
0.20
0.21
0.20
0.21
0.36
0.34
0.34
0.35
0.38
0.38
0.40
0.42
0.43
0.45
0.59
0.62
0.65
0.69
0.71
0.98
1.0
1.1
1.2
1.2
8.8
9.8
9.9
10.3
10.4
16.0
18.0
17.7
18.6
19.3
19.6
19.5
21
23
23
30
30
32
35
35
45
51
57
60
64
5.9
6.5
6.6
6.8
6.9
10.7
12.0
11.8
12.4
12.9
13.1
13.0
14.2
15.1
15.5
19.7
20
21
23
24
30
34
38
40
43
4.4
4.9
5.0
5.1
5.2
8.0
9.0
8.8
9.3
9.7
9.8
9.8
10.7
11.3
11.6
14.8
15.1
16.0
17.6
17.7
22
26
28
30
32
3.5
3.9
4.0
4.1
4.2
6.4
7.2
7.1
7.4
7.7
7.8
7.8
8.5
9.1
9.3
11.8
12.1
12.8
14.1
14.1
17.9
21
23
24
26
2.3
2.6
2.6
2.7
2.8
4.3
4.8
4.7
5.0
5.2
5.2
5.2
5.7
6.1
6.2
7.9
8.0
8.5
9.4
9.4
11.9
13.7
15.1
16.0
17.1
1.8
2.0
2.0
2.1
2.1
3.2
3.6
3.5
3.7
3.9
3.9
3.9
4.3
4.5
4.6
5.9
6.0
6.4
7.0
7.1
8.9
10.3
11.3
12.0
12.8
0.40
0.45
0.45
0.47
0.48
0.73
0.83
0.81
0.85
0.89
0.90
0.89
0.98
1.0
1.1
1.4
1.4
1.5
1.6
1.6
2.0
2.4
2.6
2.8
2.9
0.27
0.30
0.30
0.31
0.32
0.49
0.55
0.54
0.57
0.59
0.60
0.60
0.65
0.69
0.71
0.90
0.92
0.97
1.1
1.1
1.4
1.6
1.7
1.8
2.0
0.20
0.22
0.23
0.24
0.24
0.37
0.41
0.40
0.43
0.44
0.45
0.45
0.49
0.52
0.53
0.68
0.69
0.73
0.81
0.81
1.0
1.2
1.3
1.4
1.5
0.16
0.18
0.18
0.19
0.19
0.29
0.33
0.32
0.34
0.35
0.36
0.36
0.39
0.42
0.43
0.54
0.55
0.58
0.64
0.65
0.82
0.94
1.0
1.1
1.2
note: Always double check your application rates.
Tabulations are based on spraying water at 70°F (21°C).
See pages 173–187 for drop size classification, useful formulas and information.
“R”, “L”
“Y”
“W”
CapaCity
psi
(B)1/4Xp10R
(B)1/4Xp10L
(B)1/4Xp20R
(B)1/4Xp20L
(B)1/4Xp25R
(B)1/4Xp25L
(B)1/2Xp40R
(B)1/2Xp40L
(B)1/2Xp80R
(B)1/2Xp80L
20
30
40
50
60
20
30
40
50
60
20
30
40
50
60
20
30
40
50
60
20
30
40
50
60
one
DRop
size nozzLe
in gpM
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
0.71
0.87
1.00
1.12
1.22
1.42
1.75
2.00
2.25
2.50
1.74
2.13
2.50
2.75
3.00
2.87
3.53
4.00
4.55
5.00
5.60
6.83
8.00
8.73
9.60
spRay wiDth
“w” (Feet)
nozzLe spaCing “X” = 0–39
249
369
height height
8.5
10.0
11.0
12.5
13.0
9.0
11.5
13.5
14.5
15.0
10.5
12.0
13.5
14.5
15.0
11.0
13.0
14.0
15.0
16.0
13.0
15.0
16.0
16.5
17.5
10.0
11.0
12.5
13.5
14.5
11.0
12.0
14.0
15.0
16.0
11.0
13.5
14.5
15.0
16.0
12.0
14.5
15.5
16.0
17.5
15.5
16.5
17.5
18.0
18.5
nozzLe spaCing “X” = 0–39
249
gpa FoR one nozzLe
gaLLons peR 1000 sQ. Ft.
gpa FoR one nozzLe
369
gaLLons peR 1000 sQ. Ft.
4
Mph
6
Mph
8
Mph
10
Mph
15
Mph
20
Mph
2
Mph
3
Mph
4
Mph
5
Mph
4
Mph
6
Mph
8
Mph
10
Mph
15
Mph
20
Mph
2
Mph
3
Mph
4
Mph
5
Mph
10.3
10.8
11.3
11.1
11.6
19.5
18.8
18.3
19.2
21
21
22
23
23
25
32
34
35
38
39
53
56
62
65
68
6.9
7.2
7.5
7.4
7.7
13.0
12.6
12.2
12.8
13.8
13.7
14.6
15.3
15.6
16.5
22
22
24
25
26
36
38
41
44
45
5.2
5.4
5.6
5.5
5.8
9.8
9.4
9.2
9.6
10.3
10.3
11.0
11.5
11.7
12.4
16.1
16.8
17.7
18.8
19.3
27
28
31
33
34
4.1
4.3
4.5
4.4
4.6
7.8
7.5
7.3
7.7
8.3
8.2
8.8
9.2
9.4
9.9
12.9
13.4
14.1
15.0
15.5
21
23
25
26
27
2.8
2.9
3.0
3.0
3.1
5.2
5.0
4.9
5.1
5.5
5.5
5.9
6.1
6.3
6.6
8.6
9.0
9.4
10.0
10.3
14.2
15.0
16.5
17.5
18.1
2.1
2.2
2.3
2.2
2.3
3.9
3.8
3.7
3.8
4.1
4.1
4.4
4.6
4.7
5.0
6.5
6.7
7.1
7.5
7.7
10.7
11.3
12.4
13.1
13.6
0.47
0.49
0.52
0.51
0.53
0.89
0.86
0.84
0.88
0.94
0.94
1.0
1.0
1.1
1.1
1.5
1.5
1.6
1.7
1.8
2.4
2.6
2.8
3.0
3.1
0.32
0.33
0.34
0.34
0.35
0.60
0.57
0.56
0.59
0.63
0.63
0.67
0.70
0.72
0.76
0.99
1.0
1.1
1.1
1.2
1.6
1.7
1.9
2.0
2.1
0.24
0.25
0.26
0.25
0.27
0.45
0.43
0.42
0.44
0.47
0.47
0.50
0.52
0.54
0.57
0.74
0.77
0.81
0.86
0.89
1.2
1.3
1.4
1.5
1.6
0.19
0.20
0.21
0.20
0.21
0.36
0.34
0.34
0.35
0.38
0.38
0.40
0.42
0.43
0.45
0.59
0.62
0.65
0.69
0.71
0.98
1.0
1.1
1.2
1.2
8.8
9.8
9.9
10.3
10.4
16.0
18.0
17.7
18.6
19.3
19.6
19.5
21
23
23
30
30
32
35
35
45
51
57
60
64
5.9
6.5
6.6
6.8
6.9
10.7
12.0
11.8
12.4
12.9
13.1
13.0
14.2
15.1
15.5
19.7
20
21
23
24
30
34
38
40
43
4.4
4.9
5.0
5.1
5.2
8.0
9.0
8.8
9.3
9.7
9.8
9.8
10.7
11.3
11.6
14.8
15.1
16.0
17.6
17.7
22
26
28
30
32
3.5
3.9
4.0
4.1
4.2
6.4
7.2
7.1
7.4
7.7
7.8
7.8
8.5
9.1
9.3
11.8
12.1
12.8
14.1
14.1
17.9
20
23
24
26
2.3
2.6
2.6
2.7
2.8
4.3
4.8
4.7
5.0
5.2
5.2
5.2
5.7
6.1
6.2
7.9
8.0
8.5
9.4
9.4
11.9
13.7
15.1
16.0
17.1
1.8
2.0
2.0
2.1
2.1
3.2
3.6
3.5
3.7
3.9
3.9
3.9
4.3
4.5
4.6
5.9
6.0
6.4
7.0
7.1
8.9
10.2
11.3
12.0
12.8
0.40
0.45
0.45
0.47
0.48
0.73
0.83
0.81
0.85
0.89
0.90
0.89
0.98
1.0
1.1
1.4
1.4
1.5
1.6
1.6
2.0
2.3
2.6
2.7
2.9
0.27
0.30
0.30
0.31
0.32
0.49
0.55
0.54
0.57
0.59
0.60
0.60
0.65
0.69
0.71
0.90
0.92
0.97
1.1
1.1
1.4
1.6
1.7
1.8
2.0
0.20
0.22
0.23
0.24
0.24
0.37
0.41
0.40
0.43
0.44
0.45
0.45
0.49
0.52
0.53
0.68
0.69
0.73
0.81
0.81
1.0
1.2
1.3
1.4
1.5
0.16
0.18
0.18
0.19
0.19
0.29
0.33
0.32
0.34
0.35
0.36
0.36
0.39
0.42
0.43
0.54
0.55
0.58
0.64
0.65
0.82
0.94
1.0
1.1
1.2
note: Always double check your application rates.
Tabulations are based on spraying water at 70°F (21°C).
See pages 173–187 for drop size classification, useful formulas and information.
(B)=BSPT
Very
Fine
Fine
Medium
Coarse
Very Extremely
Coarse
Coarse
BOOMLESS NOZZLES
29/32
33
">