MSG ST25K-150 Manuel du propriétaire
PDF
Document
Manuel de l’utilisateur Manuel de pièces Operator’s manual Parts manual Compact sprayer Petit Pulvérisateur Modèle Model ST25K & ST25K-150 Modèles précédents / Previously models ST95K & ST95K-150 MS Gregson Inc. 4300 Vachon Drummondville Qc, Canada, J2B 6V4 A120-0019 rev5, 2025-01-08 Modèles/models ST25K & ST25K-150 A120-0019 rev4 , NS/SN 2410310 à/to 2511124 Modèles précédents / Previously models ST95K & ST95K-150 Tel. 819-474-1910 Fax 819-474-5317 info@msgregson.com www.msgregson.com LISTE DES RUBRIQUES LIST OF CONTENTS INTRODUCTION INTRODUCTION GARANTIE WARRANTY ÉTALONAGE POUR RAMPE (OPT.) CALIBRATION FOR BOOM (OPT.) PRÉPARATION DE LA BOUILLIE MIXTURE PREPARATION MISE EN MARCHE STARTING PROCEDURE MISE À L’ARRÊT STOPPING PROCEDURE ENTRETIEN MAINTENANCE REMISAGE POUR L'HIVER ET / OU TRANSPORT PAR TEMPS FROID (GEL) WINTERIZATION AND / OR COLD TEMPERATURE TRANSPORTATION (FREEZING) DONNÉES TECHNIQUES TECHNICAL DATA INCONVÉNIENTS ET REMÈDES TROUBLESHOOTING GUIDE SCHÉMA D’ASSEMBLAGE DRAWING ASSEMBLY SCHÉMAS ET LISTES DES COMPOSANTES DRAWINGS AND COMPONENTS LISTS VUES EXPLOSÉES DES COMPOSANTES PARTS BREAK DOWN 3/32 4/32 INTRODUCTION INTRODUCTION Merci d’avoir choisi un produit de qualité de MS Gregson Inc. Nous sommes heureux de vous compter parmi les propriétaires satisfaits de nos pulvérisateurs. Thank you for having selected a quality MS Gregson Inc. product. We are pleased to have you included among the many satisfied owners of our sprayers. Plusieurs années de recherche ont mené au développement de cette série de modèles et seulement des pièces et matériaux de qualité sont utilisés. Chaque machine est soigneusement testée et inspectée avant de quitter notre usine pour vous assurer des années de performance. Years of research have brought into the development of these fine products and only top quality components and materials are used throughout. Every machine is carefully tested and inspected before leaving our plant to ensure you years of performance. Pour une performance continue, souvenez-vous que cette machine représente un important investissement de votre part mais, bien entretenue, elle vous retournera votre investissement plus d’une fois. Comme pour tous les équipements mécaniques, votre machine requiert une installation adéquate, une bonne opération et l’entretien spécifié dans ce manuel. Veuillez lire ce manuel très attentivement et au complet avant d’installer et d’opérer votre machine. Examinez votre machine, ses accessoires et la caisse d’emballage pour noter tout dommage ou pièce manquante. Rapportez rapidement au transporteur toute réclamation pour perte ou dommage. 5/32 For a continuous performance, remember that this washer is a substantial investment for you, but properly cared and maintained it will return this investment many times. As with all mechanical equipment, your washer requires proper installation, proper operation and maintenance as specified in this manual. Please read carefully the entire manual before installing and operating this machine. Examine machine, accessories and crate carefully for shipping damage or missing parts. Report promptly any shortages or damage claims to freight carrier. POLITIQUE DE GARANTIES MS GREGSON MS GREGSON WARRANTY POLICY GARANTIE LIMITÉE Les machines fabriqués par MS Gregson Inc. sont garantis, à l’acheteur initial au détail, comme étant exempts de vices de matériaux ou de fabrication pour les délais spécifiés ci-dessous. Les conditions d’utilisation normale conformes aux instructions décrites dans le manuel de l’utilisateur s’appliquent. Cette garantie limitée est sujette aux exclusions ci-dessous énumérées. Elle est calculée à partir de la date de livraison à l’acheteur initial et s’applique aux composantes originales seulement. Les pièces remplacées sous cette garantie jouissent du délai restant de la garantie pour les composantes correspondantes. LIMITED WARRANTY The machines manufactured by MS Gregson Inc. are warranted, to the original purchaser, to be free from defects in materials and workmanship for the periods specified below. Normal use conditions, according to the instructions in the operator’s manual, apply. This limited warranty is subject to the exclusions listed below, is calculated from the date of delivery to the original purchaser, and applies to the original components only. Parts replaced under this warranty will assume the remainder of the corresponding part’s warranty period. GARANTIE DE 1 AN SUR LES PIÈCES, 1 AN SUR LA MAIN-D’OEUVRE Les composantes, excluant les accessoires mentionnés cidessous et les items d’entretien courant mentionnés ci-dessous, sont couvertes par une garantie de 1 an sur les pièces et la main-d’oeuvre. GARANTIE OFFERTE PAR D’AUTRES MANUFACTURIERS Les moteurs électriques ou à essence, batteries, pneus, jantes, contrôleur de taux ou autres items dont le manufacturier offre directement une garantie, sont réparés dans un centre de service autorisé du manufacturier correspondant. MS Gregson Inc. ne peut offrir de garantie sur ces items. EXCLUSIONS DE LA GARANTIE - Ajustements de routine et articles d’entretien courant tels que lubrifiants, courroies, boyaux, joints toriques, tamis de filtre, fusibles, systèmes d’étanchéité de pistolets. - Réparations requises suite à une collision, un accident, un choc, un abus, des modifications apportées à l’équipement sans autorisation, une installation inadéquate, un mauvais entretien, une utilisation contraire aux directives fournies dans ce manuel ou au bon sens commun. - Réparations requises suite au gel ou à l’exposition à des produits corrosifs. - Réparation requises suite à des fluctuations de tension électrique d’alimentation. - Réparations requises suite à une alimentation insuffisante en eau ou à une eau de mauvaise qualité. - Dommage aux cultures dû à un mauvais calibrage ou usage de l’équipement. - Dommage aux cultures ou déversement dû à un bris de composante et/ou un accident. - Frais résultant de l’arrêt de l’unité durant une réparation ou pour toute autre raison. - Frais de transport et/ou de déplacement. 1 YEAR PARTS, 1 YEAR LABOUR WARRANTY The components, excluding accessories listed below and normal wear items listed below, are warranted for 1 year on parts and labour. WARRANTY PROVIDED BY OTHER MANUFACTURERS Motors, engines, batteries, wheels, rims, rate controller or other items which are warranted by their respective manufacturers, are serviced through these manufacturer’s local authorized service centres. MS Gregson Inc. cannot provide warranty on these items. EXCLUSIONS OF WARRANTY - Routine adjustments and normal maintenance items such as lubricants, belts, hoses, O-rings, filter screens, fuses, gun seal kits. - Repairs required as a result of collision, accident, bumping, misuse, modifications made to the equipment without authorization, incorrect installation, lack of required maintenance, use contrary to the instructions included in this manual or to the common sense. - Repairs required as a result of freezing or exposition to corrosive products. - Repairs required as a result of voltage fluctuations of the electric supply. - Repairs required as a result of insufficient water supply or poor quality water. - Damage to crop due to wrong calibration or incorrect use of the equipment. - Damage to crop or spill due to components failure and/or accident. - Additional charge resulting from paralyzation and repair of the equipment. - Transportation and/or travelling. EXECUTION OF REPAIRS WITHIN THE WARRANTY PERIOD In order to obtain warranty service on items warranted by MS Gregson Inc. within the warranty EXÉCUTION DE RÉPARATION PENDANT LA PÉRIODE DE GARANTIE Pour obtenir le service de garantie sur des pièces garanties par MS Gregson Inc. pendant la 6/32 period, you must show to your dealer a proof of purchase. If the equipment is permanently installed, repairs will be carried out on the spot by the dealer. For warranty service on components warranted by other manufacturers, your authorized MS Gregson dealer can help you obtain warranty service through these manufacturers’ local authorized service centres. The dealer has the responsibility to carry out repairs within the warranty period. Repairs will be done at the dealer’s repair-shop for mobile equipments ( or at your site upon dealer choice); the purchaser has the responsibility to bring his equipment to his dealer’s repair-shop. The parts changed under warranty become the property of MS Gregson Inc. période de garantie, vous devez montrer à votre concessionnaire une preuve d’achat de votre équipement. Si l’équipement est installé de façon permanente, les réparations seront effectuées sur place par le concessionnaire. Pour obtenir le service de garantie sur les composantes garanties par d’autres manufacturiers, votre concessionnaire peut vous aider à obtenir ces services dans un centre local de service autorisé. Le concessionnaire a la responsabilité d’effectuer les réparations couvertes pendant la durée de la garantie. Ces réparations se feront à l’atelier du concessionnaire pour les équipements mobiles ou chez le client au choix du concessionnaire ; le client au détail a la responsabilité d’apporter son équipement chez son concessionnaire. Les pièces changées sous garantie deviennent la propriété de MS Gregson Inc. LIMITATION OF LIABILITY MS Gregson Inc. liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall MS Gregson Inc. liability exceed the purchase price of the product in question. THE WARRANTY CONTAINED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. MS Gregson Inc. does not authorize any other party, including authorized MS Gregson dealers, to make any representation or promise on behalf of MS Gregson Inc. or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure that the installation and use of MS Gregson products conforms to local codes. While MS Gregson Inc. attempts to assure that its products meet national codes, it cannot be responsible for how the customer chooses to use or install the product. LIMITE DE LA RESPONSABILITÉ La responsabilité de MS Gregson Inc. pour les dommages particuliers, accidentels ou conséquents est expressément déniée. En aucun temps, la responsabilité de MS Gregson Inc. ne peut excéder le prix d’achat du produit en question. LA PRÉSENTE GARANTIE TIENT LIEU DE TOUTE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS TOUTE GARANTIE IMPLICITE D’ADAPTATION POUR UNE UTILISATION PARTICULIÈRE. MS Gregson Inc. n’autorise aucune autre partie, incluant les concessionnaires MS Gregson autorisés, à faire toute représentation ou promesse au nom de MS Gregson Inc. ou à modifier les termes, conditions ou limitations d’aucune façon. Il est de la responsabilité de l’acheteur de s’assurer que l’installation et l’utilisation des produits MS Gregson respectent les codes locaux. Bien que MS Gregson Inc. tente de s’assurer que ses produits rencontrent les codes nationaux, elle ne peut être responsable de la façon dont le client choisit d’installer ou 7/32 ÉTALONAGE POUR RAMPE (opt.) CALIBRATION FOR BOOM (opt.) Lire l’étiquette du produit et déterminer le taux d’application. Read chemical product label and determine your target rate. Déterminer la vitesse d’avancement (mph / km/h) avec le véhicule en mesurant une distance (TABLEAU 1). Determine your working speed (mph / km/h) with your vehicule by measuring distance (TABLE 1). Faire une marque sur le levier d’accélérateur pour avoir toujours la même vitesse. Make a mark on throttle position to always work at the same speed. Trouver le taux correspondant à la vitesse d’avancement (TABLEAU 2). Find corresponding rate to your working speed (TABLE 2). AVERTISSEMENT : Il est préférable de faire un essai avec de l’eau. WARNING: It is recommended to make a test with water. Vérifier la quantité d’eau utilisée comparativement à la superficie pulvérisée et s’assurer du taux d’application afin d’éviter une sous ou une sur-application. Verify how much water you use compared to the treated area to be sure of spraying rate, avoiding all under or over application. NOTE : Pour assistance contacter les autorités agricoles locales ou votre concessionnaire de produit pour la calibration. NOTE: For assistance contact your agricultural local authorities or chemical dealer to help you on calibration. tableau 1 / table 1 Vitesse MPH speed 0.5 0.75 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Vitesse km/h speed 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 Time required in sec. to travel a distance of / temps en secondes pour une distance de 100 pied/feet 200 pied/feet 300 pied/feet 136 273 409 90 182 272 68 136 205 45 91 136 34 68 102 27 55 82 23 45 68 19 39 58 17 34 51 Time required in sec. to travel a distance of / temps en secondes pour une distance de 30 m 60 m 90 m 216 432 648 108 216 324 72 144 216 54 108 162 43 86 130 36 72 108 32 63 95 27 54 81 23 45 68 18 36 54 8/32 tableau 2 / table 2 Ce tableau est basé sur : This chart is based on: buse : TEEJET TFVP3 Débit à une buse (max.): 2 l/min (0.53 gpm) Espacement : 91.44 cm (36’’) nozzle : TEEJET TFVP3 max. flow at nozzle : 2 l/min (0.53 gpm) spacing : 91.44 cm (36’’) Formule: GPA=(5940 x 0.53 gpm) / (MPH x 36’’) l/ha = (60000 x 2 l/min) / (km/h x 91.44 cm) Formula: GPA=(5940 x 0.53 gpm) / (MPH x 36’’) l/ha = (60000 x 2 l/min) / (km/h x 91.44 cm) Vitesse d’avancement / working speed MPH pi/min km/h ft/min Gal US / acre US GPA Taux d’application / Application rate Gal US/1000 pi ² l/ha US gal. / 1000 ml/100 m² sq.ft. l / 100 m ² 0.5 44 0.80 174 506 1630 16.3 0.75 66 1.21 116 337 1087 10.9 1.0 88 1.61 87 253 815 8.2 1.5 132 2.41 58 169 543 5.4 2.0 176 3.22 44 126 408 4.1 2.5 220 4.02 35 101 326 3.3 3.0 264 4.83 29 84 272 2.7 3.5 308 5.63 25 72 233 2.3 4.0 352 6.44 22 63 204 2.0 9/32 PRÉPARATION DE LA BOUILLIE MIXTURE PREPARATION Remplir le réservoir au 2/3 de la quantité requise pour le traitement à effectuer. Fill the tank to 2/3 of needed volume for treatment to be made. NOTE : S’assurer d’avoir le temps requis pour compléter le traitement selon les conditions météorologiques. Ne jamais laisser de produit non-utilisé dans le réservoir et dans la plomberie de l’unité. Porter les équipements de protection requis pour la manutention des produits. NOTE: Make sure there is enough time to complete the application depending on weather conditions. Never leave unused product in the tank and in the unit plumbing. Wear protective equipment when handling chemicals. Verser directement les produits dans le réservoir. Pour chemical in the tank. NOTE : Suivre les recommandations de dilution pour les produits de type granulaire ou en poudre. Toujours diluer avec de l’eau dans un autre contenant avant de verser dans le réservoir. NOTE: Follow label instruction for dilution rate for granular and powder product. Always dilute with water in another jar before pouring it into the tank. Entrer la buse du pistolet par le couvercle et actionner la gâchette pour agiter le produit. (Voir étape MISE EN MARCHE). Insert handgun in the tank and press the gun trigger to agitate product in the tank. (See STARTING PROCEDURE). Ajouter de l’eau jusqu’à la quantité désirée. Agiter jusqu’à un mélange homogène. Retirer et rincer la lance avec de l’eau claire dans une réservoir. Fermer le couvercle. Add water up to the desired water level. Agitate until satisfactory mix is obtained. Remove and rinse the wand with clear water in a tank. Close the lid MISE EN MARCHE STARTING PROCEDURE Installer l’unité au point d’attache du tracteur et brancher la connexion électrique a l’unité. Attach unit tongue to the tractor and hook up the electrical connection to the unit pump. NOTE : L’unité doit être au niveau ou avec une légère pente vers l’avant une fois installé à l’attache du tracteur. NOTE: The unit tank must be level or with slight slope forward when attached to tractor. Mettre les interrupteurs en position ON (l’interrupteur sur la pompe et sur l’auxiliaire). Turn ON the switches (switch on the pump and the auxiliary). Utiliser le pistolet pour bien mélanger le produit dans le réservoir, si l’unité a été entreposé un certain temps, se référer aux étiquettes de produit pour les taux de dilution (voir ÉTALONNAGE). If the unit has been sitting for a while use the spray gun to have a good mixture in the tank, refer to product label for dilution rate (see CALIBRATION). Utiliser le pistolet pour les endroits difficiles d’accès et en hauteur. Ajuster la buse pour obtenir la distance désirée. Use the gun for areas that are difficult to access and for high treatment. Adjust nozzle to obtain proper spray pattern. Au besoin, ouvrir la vanne d’alimentation de la rampe. Un étalonnage doit être fait pour s’assurer de la dose à appliquer à chaque utilisation (voir ÉTALONNAGE). S’assurer que les deux buses ont le même débit à l’aide de contenants. Utiliser l’interrupteur ON/OFF pour contrôler la pulvérisation des buses de la rampe à partir du siège de l’opérateur. Avec un point de If needed, open the boom supply valve. Calibration must be done before each use to be sure of proper rate (see CALIBRATION). Be sure to have same flow at both nozzles with calibration jar. Use ON/OFF switch to control spraying nozzle on the boom from operator’s seat. With stakes, make runs with regular width to cover entire area to treat uniformly. 10/32 repère faire des passages de largeur régulière pour couvrir la superficie à traiter de façon uniforme. MISE À L’ARRÊT STOPPING PROCEDURE Mettre l’interrupteur en position OFF. Turn OFF the switch. Fermer la vanne d’alimentation de la rampe. Close the boom supply valve. IMPORTANT : Rincer le réservoir de l’unité et la plomberie avec de l’eau claire après chaque utilisation (voir ENTRETIEN / REMISAGE). IMPORTANT: Rinse the unit tank and the plumbing with clear water after each use (see MAINTENANCE / STORAGE). ENTRETIEN / REMISAGE MAINTENANCE / STORAGE Pompe : Rincer avec de l’eau claire après chaque utilisation spécialement après une pulvérisation avec de l’engrais liquide, une insecticide ou un fongicide. Toujours porter un équipement de protection. Pump: Rinse after each use with clear water especially if you use a liquid fertilizer, an insecticide or a fungicide. Always wear protective clothing. Filtre d’alimentation : Vérifier et nettoyer régulièrement le filtre d’alimentation d’eau dans le réservoir. Suction filter: Regularly check and clean the suction water filter in the tank. Buses : Vérifier et nettoyer régulièrement les buses pour éviter tout colmatage ou diminution de débit. Nozzles: Regularly check and clean nozzles to avoid plugging and lower flow rate. Nettoyage : Nettoyer tous les filtres avant de commencer cette étape. Laver et rincer avec un produit neutralisant tous les équipements ayant été en contact direct ou indirect tel que l’embrun pour éviter tout risque de contamination lors de la manutention et l’entreposage. Consulter le fournisseur de produits sanitaire pour les produits de nettoyage et de neutralisation pour pulvérisateur. Nettoyer tous les filtres à nouveau. Cleaning: Clean all filters before starting this operation. Clean and wash with neutralizing product all the equipment that has been in direct or indirect contact with drift to avoid contamination in handling or storage. Consult your product suppliers to obtain cleaning and neutralizing product for sprayer. Clean all the filters again. Toujours nettoyer les équipements de pulvérisation dans un endroit bien aéré et non-cultivé et loin des sources d’eau potable. Consulter les instances agricoles locales pour les moyens à prendre et les règles à suivre pour éviter toute contamination des sources d’eau potable, enfants et animaux domestiques. Always clean the sprayer equipment in a ventilated area and non-cultivated area away from water source. Contact local agricultural authorities for advice on disposal and laws to avoid contamination of water source, kids and pets. REMISA GE STORA GE Rincer et drainer le réservoir, la rampe, les tubes, les boyaux ainsi que la pompe. Rinse and drain the tank, the boom, the tubes, the hoses and the pump. Faire fonctionner l’unité en aspirant une solution d’antigel (prestone) de façon à ce qu’elle en soit complètement rempli Operate the system by sucking an anti-freeze (prestone) solution through the hoses and the pump. NOTE: Do not use 11/32 (boyaux et pompe). NOTE : ne pas utiliser de liquide lavevitre. windshield washer fluid. Enlever la base et le tamis du filtre. Take-off base and filter screen. Enlever le cadran à pression et remiser au chaud (ne supporte pas le gel). Take-off pressure gage and put it in a warm place (it does not support freezing). S’assurer qu’il ne reste plus de liquide dans les filtres. Make sure that no liquid is left into the filters. Avant de mettre à nouveau l’unité en marche, bien vider et laver le réservoir, les boyaux et la pompe. Before starting the unit again, be sure that the tank, hoses and pump are well emptied and washed. 12/32 DONNÉES TECHNI QUES ST25K TECHNI CAL DATA ST25K Usage Usage agricole Use Agricultural use Débit 1.8 gal. US/min (6.8 l/min) 3.1 bars 45 lb/po² Flow rate 1.8 US gpm (6.8 l/min) 3.1 bars 45 psi Pression maximum Maximum pressure courant 5.8 A tension 12 Vcc Pompe Shurflow 8007543250 Boyau / pistolet boyau 1/4 po x 26 pi pistolet 60 lb/po² , 0.6 à 1.7 l/min Dimensions 30 x 23 x 38 po (L x l x H) expedition (76 x 58 x 97 cm) Poids à vide 27 kg 60 lbs. Moteur Capacité du réservoir current 5.8 A voltage 12 Vdc Pump Shurflow 8007543250 Hose / gun hose 1/4 inch x 26 feet gun 60 psi, 0.6 to 1.7 l/min Dimensions 30” x 23” x 38” (L x W x H) shipping (76 x 58 x 97 cm) Empty weight 27 kg 60 lbs. Engine 95 litres 25 gallons US 95 litres 25 US gallons Tank capacity DONNÉES TECHNI QUES ST25K-150 TECHNI CAL DATA ST25K-150 Usage Débit Use Flow rate Usage agricole 1.5 gal. US/min (5.7 l/min) Pression maximum 10.3 bars 150 lb/po² Moteur courant 12 A tension 12 Vcc Pompe Shurflow 8030813239 Boyau / pistolet boyau 1/4 po x 26 pi pistolet Dimensions (L x l x H) expedition Poids à vide Capacité du réservoir Agricultural use 1.5 US gpm (5.7 l/min) Maximum pressure 10.3 bars 150 psi Engine current 12 A voltage 12 Vdc Pump Shurflow 8030813239 Hose / gun hose 1/4 inch x 26 feet 60 lb/po² , 0.6 à 1.7 l/min 30 x 23 x 38 po gun Dimensions (76 x 58 x 97 cm) 27 kg 60 lbs. 95 litres 25 gallons US (L x W x H) shipping Empty weight Tank capacity 13/32 60 psi, 0.6 to 1.7 l/min 30” x 23” x 38” (76 x 58 x 97 cm) 27 kg 60 lbs. 95 litres 25 US gallons 14/32 15/32 Nettoyer ou remplacer. Remplacer. Refaire étape d’étalonnage ou consulter le concessionnaire pour assistance. Les filtres sont bouchés. Les buses sont usées. Mauvais étalonnage. Le siège du fusil n’est pas étanche. Mauvaise dose d’application Fuite de liquide par la buse du fusil Nettoyer ou remplacer. Nettoyer ou remplacer. Nettoyer ou remplacer. Nettoyer ou remplacer. Les filtres sont bouchés. Le filtre d’aspiration est bouché. Les buses sont bouchées. Vérifier la tuyauterie. Nettoyer ou remplacer. Nettoyer ou remplacer. Les valves de la pompe sont usées ou sales. La pompe aspire de l’air. Les buses sont bouchées. Vérifier la tuyauterie de l’alimentation. Remplacer. Le moteur est défectueux. La pompe aspire de l’air. Mettre l’interrupteur sur la pompe et l’interrupteur auxiliaire à la position ON. Le moteur n’est pas alimenté en courant. Nettoyer ou remplacer. Remplacer. Le/les fusibles sont brûlés. Les valves de la pompe sont usées ou sales. Brancher l’alimentation électrique. SOLUT ION Le moteur n’est pas alimenté en courant. CAUSE Traitement non-uniforme, débit différent aux buses de rampe La pompe fonctionne mais le liquide ne coule pas aux buses. La pression n'est pas régulière. La pompe fonctionne, mais ne donne pas la pression maximum. Le moteur ne fonctionne pas PROBL ÈME I NCONVÉNI ENTS ET REMÈDES 15 Liquid leakage at the gun spray nozzle. Wrong spray rate. Uneven spray, different flows at the boom nozzles. The pump is working but no liquid comes out from the nozzles. Fluctuating pressure. The pump runs, but does not give maximum pressure. The motor does not run. FAULT The seat is not tight. The nozzles are worn. Wrong calibration. The filters are plugged. The suction filter is plugged. The nozzles are plugged. The filters are plugged. Pump is sucking air. The nozzles are plugged. The pump valves are worn or dirty. Pump is sucking air. The pump valves are worn or dirty. The motor is defective. There is no power supply. One or both fuses are burnt out. There is no power supply. CAUSE Clean or replace. Replace. Redo the calibration step or consult your local dealer for assistance. Clean or replace. Clean or replace. Clean or replace. Clean or replace. Check the suction line. Clean or replace. Clean or replace. Check the suction line. Clean or replace. Replace. Put the switch on the pump and the auxiliary switch in ON position. Replace. Connect power cable. REMED Y TROUBLESHOOTI NG GUI DE # REF. Q. L" 1 LV-12K3150 1 16 " 2 LV-38K3150 1 224 " 2 16 20 15 4 19 14 21 12 5 6 13 7 8 22 17 16 1 8 3 9 10 11 23 AC-30101 18 # REF. Q. 3 AC-SB25WPSPR 1 4 SH-8007543250 1 5 BT-FW316 4 6 BT-10241RS 4 7 JB-EL3812NY40 1 8 SN-078008 2 9 JB-IHB0004NY40 1 10 JB-38000035 1 11 MP-3B34G 1 12 JB-M3800NY40 1 13 JB-TT38NY 1 14 JB-VMM0003NY40 1 15 JB-IMB0303NY40 1 16 SN-078005 2 17 JB-5080021AL406 1 18 AC-12200 1 19 AU-FIL2B8 1 20 AU-666257 1 21 AU-MIN10 1 22 DO-761022 2 23* AU-PNS3-G 1 24 AU-DECAVER3 1 25 AU-DECAVER7 1 26 AU-DECMSLOGOB-G 2 27* AU-BL371918 1 28* A120-0019 1 29* AU-SAZL46 1 30* AU-L8400M 4 25 24 AC-19009 AC-10960 AC-19010 26 Rouge Red Bat + Bat - 16/32 Rouge Red Noir Black 2025-01-07 ST25K Pg:1-2 Rev: 0 SH-8007543250 Pompe Shurflo • Shurflo pump REF 3B 4 8 9 10 11 12 NO SH-3018900 SH-121001 SH-9437900 SH-1116801 SH-9439107 SH-9438532 SH-8007543SW SH-8471200 DESCRIPTION No control plate Screw Upper housing Motor with electrical package Valve assembly Solid diaphragm drive assembly Switch Case assembly Q 1 3 1 1 1 1 1 1 POMPE COMPLÈTE / PUMP ASSEMBLY POMPE COMPLÈTE / PUMP ASSEMBLY Débit . . . . . . . . . . . . . . . . . . .1.8 gal US/min - 6.8 l/min Flow rate . . . . . . . . . . . . . . . .1.8 US GPM - 6.8 l/min Pression maximale . . . . . . . .45 lb/po2 Maximum pressure . . . . . . . .45 PSI Contrôle . . . . . . . . . . . . . . . . .“By-pass” interne Control . . . . . . . . . . . . . . . . .Internal by-pass Came . . . . . . . . . . . . . . . . . . .3.0 degrés Cam . . . . . . . . . . . . . . . . . . .3.0 degrees Commutateur de pression . . .non Pressure switch . . . . . . . . . . .none Volt . . . . . . . . . . . . . . . . . . . .12V DC Volt . . . . . . . . . . . . . . . . . . . .12V DC Ampérage . . . . . . . . . . . . . . .5.6 amp Amperage . . . . . . . . . . . . . . .5.6 amp Corps de pompe . . . . . . . . . .Polypropylène Pump housing . . . . . . . . . . . .Polypropylene Membrane . . . . . . . . . . . . . . .Santoprene Diaphragm . . . . . . . . . . . . . .Santoprene Valves . . . . . . . . . . . . . . . . . .Viton Valves . . . . . . . . . . . . . . . . . .Viton Entrée-sortie . . . . . . . . . . . . .3/8” FNPT Ports . . . . . . . . . . . . . . . . . . .3/8” FNPT Température de liquide . . . . .170°F / 77°C max. Liquid temperature . . . . . . . .170°F / 77°C max. Auto-amorçage . . . . . . . . . . .jusqu’à 11‘ d’élévation Self-priming . . . . . . . . . . . . .up to 11’ vertical Pression max. d’entrée . . . . .30 lb/po2 Max. inlet pressure . . . . . . . .30 PSI Usage . . . . . . . . . . . . . . . . . .Continu Duty cycle . . . . . . . . . . . . . . .Continuous Poids . . . . . . . . . . . . . . . . . . .4.6 lb (2.1 kg) Weight . . . . . . . . . . . . . . . . . .4.6 lb (2.1 kg) SH-8007543250 17/32 27/03/07 14:48 # REF. Q. L" 1 LV-12K3150 2 16 " 2 LV-38K3150 1 240 " 17 16 20 5 22 26 24 9 18 15 23 25 13 7 6 29 9 14 8 21 1 20 29 19 A 1 28 9 31 10 4 11 12 27 AC-30101 DETAIL A 30 33 32 AC-19009 AC-10960 AC-19010 # REF. Q. 4 AC-SB25WPSPR 1 5 SH-8030813239 1 6 BT-10241RS 4 7 BT-FW316 4 8 JB-EL3812NY40 1 9 SN-078008 3 10 JB-IHB0004NY40 1 11 JB-38000035 1 12 MP-3B34G 1 13 JB-RMM0304NY 1 14 BJ-CR050 1 15 JB-VMM0004NY40 1 16 JB-2312012PP 1 17 JB-025FF00200 1 18 JB-IMB0404NY40 1 19 JB-EL1238NY40 1 20 SN-078005 2 21 JB-5080021AL406 1 22 AU-761245 2 23 AU-10199 1 24 AU-FIL2B8 1 25 DO-761357 2 26 AU-PPCA20173 1 27 AU-666257 1 28 AU-MIN10 1 29 DO-761022 2 30 AC-12200 1 31* AU-PNS3-G 1 32 AU-DECAVER3 1 33 AU-DECAVER7 1 34 AU-DECMSLOGOB-G 2 35* AU-L8400M 4 36* AU-SAZL46 1 37* A120-0019 1 38* AU-BL371918 1 34 Bat + Bat - 18/32 Rouge Red Rouge Red Noir Black 2025-01-08 ST25K-150 Pg:1-2 Rev: 0 SH-8030813239 Pompe • Pump Model number Complete pump assembly Switch assembly Upper housing Bypass/ non bypass valve assembly Diaphragm assembly Drive/ impeller assembly Motor 1 2 4 5 6 7 8 SH-8030813239 N/A SH-8437520 SH-9437901 SH-9439015 SH-9438532 N/A SH-1122700 POMPE COMPLÈTE / PUMP ASSEMBLY POMPE COMPLÈTE / PUMP ASSEMBLY Débit . . . . . . . . . . . . . . . . . . .1.5 gal US/min - 5.5 l/min Flow rate . . . . . . . . . . . . . . . .1.5 US GPM - 5.5 l/min Pression maximale . . . . . . . .150 lb/po2 Maximum pressure . . . . . . . .150 PSI Contrôle . . . . . . . . . . . . . . . . .Commutateur de pression Control . . . . . . . . . . . . . . . . .Pressure switch Came . . . . . . . . . . . . . . . . . . .3.0 degrés Cam . . . . . . . . . . . . . . . . . . .3.0 degrees Volt . . . . . . . . . . . . . . . . . . . .12V DC Volt . . . . . . . . . . . . . . . . . . . .12V DC Ampérage . . . . . . . . . . . . . . .12 amp Amperage . . . . . . . . . . . . . . .12 amp Corps de pompe . . . . . . . . . .Polypropylène Pump housing . . . . . . . . . . . .Polypropylene Membrane . . . . . . . . . . . . . . .Santoprene Diaphragm . . . . . . . . . . . . . .Santoprene Valves . . . . . . . . . . . . . . . . . .Viton Valves . . . . . . . . . . . . . . . . . .Viton Entrée-sortie . . . . . . . . . . . . .3/8” FNPT Ports . . . . . . . . . . . . . . . . . . .3/8” FNPT Température de liquide . . . . .170°F / 77°C max. Liquid temperature . . . . . . . .170°F / 77°C max. Auto-amorçage . . . . . . . . . . .jusqu’à 8‘ d’élévation Self-priming . . . . . . . . . . . . .Up to 8’ vertical Pression max. d’entrée . . . . .30 lb/po2 Max. inlet pressure . . . . . . . .30 PSI Usage . . . . . . . . . . . . . . . . . .Continu Duty cycle . . . . . . . . . . . . . . .Continuous Poids . . . . . . . . . . . . . . . . . . .4.2 lb (1.9 kg) Weight . . . . . . . . . . . . . . . . . .4.2 lb (1.9 kg) SH-8030813239 19/32 26/06/09 11:54 JB-23120 Régulateur • Regulator REF NO DESCRIPTION Q 1 2 3 4 Adjusting cap, nylon (gray) Spring retainer, polypropylene (black) Retaining pin, type 302 s. steel O-ring, EPDM rubber (std) O-ring, Viton (opt.) Spring, type 302 s. steel (std) Spring, type 316 s. steel (opt.) Guide seat, polypropylene (black) Lock ring, polypropylene (gray) Body, polypropylene (black) / JB-2312012PP Body, polypropylene (black) / JB-2312034OO 1/4 pipe plug, nylon 1 1 1 1 1 1 1 1 1 1 1 1 5 6 7 8 9 JB-CP23122NY JB-CP23124PPB JB-CP23126302SS JB-CP771715EPR JB-CP771715VI JB-CP23127302SS JB-CP23127316SS JB-CP23125PPB JB-CP23123PP JB-CP231281PPB JB-CP231211PPB JB-840014NY JB-23120 05/11/2003 15:25 20/32 21/32 REF. LV-38K3150 # 1 1 Q. L" 60 " 17 16 15 15 14 13 Enlever Remove 12 5 6 7 18 4 2 19 15 15 16 17 8 9 10 5 1 4 3 10 11 JB-SE14NY40 JB-TT14NY40 C800-0005 5 6 7 9 JB-EL3838NY AU-2137PP C800-0006 BT-142 BT-FW14 BT-LW14 SN-WN6 AU-3213PP BT-14214 12 13 14 15 16 17 18 19 2011/06/15 CR800-PP015A00201 SN-078006 11 AU-L5300M JB-8121NY406 10 9* JB-467614NY BJ-LV025MTV 4 8 JB-14XP10RVP 3 REF. JB-14XP10LVP # 2 Pg:1-2 Rev: 0 2 1 4 4 8 2 1 1 1 2 6 1 1 1 1 2 2 1 1 Q. 22/32 REF. LV-12K3150 # 1 9 1 Q. 3 L" 8 240 " 7 4 6 1 8 9 2 8 7 4 5 1 8 9 2 8 7 4 1 8 8 1 8 9 2 8 4 5 1 3 4 6 JB-8027NY 7 8 JB-OC03 6 9 JB-TP11003VP 5 5 8 1 8 11 12 13 11 8 10 7 7 2010/11/16 PP00066 Vendu non assemblé Sold not assembled JB-050FFBT JB-IMB0404BR 14 8 15 JB-3FBP 13 1 JB-3FPS JB-IMB0304BR 11 15 12 JB-T12NY40 9 10 14 14 JB-AA111SQ1 8 8 DA-SHAS6 JB-8079PP50 4 1 JB-8121NY540 3 8 JB-8120NY540 REF. 2 # 11 Pg:1-1 Rev: 0 1 2 1 1 3 1 5 16 5 2 3 5 2 3 Q. 23/32 VisiFlo® Flat Spray Tips Features: ■ Tapered edge flat spray pattern for uniform coverage in broadcast spraying. ■ VisiFlo color-coded version available in stainless steel, ceramic and polymer in 80° or 110° spray angles in selected sizes. ■ Available in ceramic 80° capacities 01– 03 and 110° capacities 01– 02. See XR and XRC TeeJet® tips on pages 10 and 11 for larger capacities. ■ Available in brass in 110° spray angle only with VisiFlo color-coding. TP650050† TP800050† TP1100050† (100) TP650067† TP800067† TP1100067† (100) TP6501† TP8001 TP11001 (100) TP65015† TP80015 TP110015 (100) TP6502† TP8002 TP11002 (50) TP6503† TP8003 TP11003 (50) TP6504† TP8004 TP11004 (50) TP6505† TP8005 TP11005 (50) TP6506† TP8006 TP11006 (50) TP6508† TP8008 TP11008 (50) TP6510† TP8010† TP11010† TP6515† TP8015† TP11015† TP6520† TP8020† TP11020† bar CAPACITY ONE NOZZLE IN l/min 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 0.16 0.18 0.20 0.22 0.23 0.21 0.24 0.26 0.28 0.30 0.32 0.36 0.39 0.42 0.45 0.48 0.54 0.59 0.64 0.68 0.65 0.72 0.79 0.85 0.91 0.96 1.08 1.18 1.27 1.36 1.29 1.44 1.58 1.71 1.82 1.61 1.80 1.97 2.13 2.27 1.94 2.16 2.37 2.56 2.74 2.58 2.88 3.16 3.41 3.65 3.23 3.61 3.95 4.27 4.56 4.83 5.40 5.92 6.39 6.84 6.44 7.20 7.89 8.52 9.11 ■ Standard version (not color-coded) available in 15°, 25°, 40°, 50° and 65° spray angles in brass, stainless steel or hardened stainless steel. ■ See page 33 for TeeJet even flat spray tips. ■ Automatic spray alignment with 25612-*-NYR Quick TeeJet® cap and gasket. Reference page 55 for more information. ■ Automatic spray alignment for sizes 10 thru 20 with 25610-*-NYR Quick TeeJet cap and gasket. Reference page 55 for more information. l/ha 4 km/h 5 km/h 6 km/h 7 km/h 8 km/h 50 cm 10 km/h 12 km/h 16 km/h 18 km/h 20 km/h 25 km/h 30 km/h 35 km/h 48.0 38.4 32.0 27.4 24.0 19.2 54.0 43.2 36.0 30.9 27.0 21.6 60.0 48.0 40.0 34.3 30.0 24.0 66.0 52.8 44.0 37.7 33.0 26.4 69.0 55.2 46.0 39.4 34.5 27.6 63.0 50.4 42.0 36.0 31.5 25.2 72.0 57.6 48.0 41.1 36.0 28.8 78.0 62.4 52.0 44.6 39.0 31.2 84.0 67.2 56.0 48.0 42.0 33.6 90.0 72.0 60.0 51.4 45.0 36.0 96.0 76.8 64.0 54.9 48.0 38.4 108 86.4 72.0 61.7 54.0 43.2 117 93.6 78.0 66.9 58.5 46.8 126 101 84.0 72.0 63.0 50.4 135 108 90.0 77.1 67.5 54.0 144 115 96.0 82.3 72.0 57.6 162 130 108 92.6 81.0 64.8 177 142 118 101 88.5 70.8 192 154 128 110 96.0 76.8 204 163 136 117 102 81.6 195 156 130 111 97.5 78.0 216 173 144 123 108 86.4 237 190 158 135 119 94.8 255 204 170 146 128 102 273 218 182 156 137 109 288 230 192 165 144 115 324 259 216 185 162 130 354 283 236 202 177 142 381 305 254 218 191 152 408 326 272 233 204 163 387 310 258 221 194 155 432 346 288 247 216 173 474 379 316 271 237 190 513 410 342 293 257 205 546 437 364 312 273 218 483 386 322 276 242 193 540 432 360 309 270 216 591 473 394 338 296 236 639 511 426 365 320 256 681 545 454 389 341 272 582 466 388 333 291 233 648 518 432 370 324 259 711 569 474 406 356 284 768 614 512 439 384 307 822 658 548 470 411 329 774 619 516 442 387 310 864 691 576 494 432 346 948 758 632 542 474 379 1023 818 682 585 512 409 1095 876 730 626 548 438 969 775 646 554 485 388 1083 866 722 619 542 433 1185 948 790 677 593 474 1281 1025 854 732 641 512 1368 1094 912 782 684 547 1449 1159 966 828 725 580 1620 1296 1080 926 810 648 1776 1421 1184 1015 888 710 1917 1534 1278 1095 959 767 2052 1642 1368 1173 1026 821 1932 1546 1288 1104 966 773 2160 1728 1440 1234 1080 864 2367 1894 1578 1353 1184 947 2556 2045 1704 1461 1278 1022 2733 2186 1822 1562 1367 1093 16.0 18.0 20.0 22.0 23.0 21.0 24.0 26.0 28.0 30.0 32.0 36.0 39.0 42.0 45.0 48.0 54.0 59.0 64.0 68.0 65.0 72.0 79.0 85.0 91.0 96.0 108 118 127 136 129 144 158 171 182 161 180 197 213 227 194 216 237 256 274 258 288 316 341 365 323 361 395 427 456 483 540 592 639 684 644 720 789 852 911 12.0 13.5 15.0 16.5 17.3 15.8 18.0 19.5 21.0 22.5 24.0 27.0 29.3 31.5 33.8 36.0 40.5 44.3 48.0 51.0 48.8 54.0 59.3 63.8 68.3 72.0 81.0 88.5 95.3 102 96.8 108 119 128 137 121 135 148 160 170 146 162 178 192 206 194 216 237 256 274 242 271 296 320 342 362 405 444 479 513 483 540 592 639 683 10.7 12.0 13.3 14.7 15.3 14.0 16.0 17.3 18.7 20.0 21.3 24.0 26.0 28.0 30.0 32.0 36.0 39.3 42.7 45.3 43.3 48.0 52.7 56.7 60.7 64.0 72.0 78.7 84.7 90.7 86.0 96.0 105 114 121 107 120 131 142 151 129 144 158 171 183 172 192 211 227 243 215 241 263 285 304 322 360 395 426 456 429 480 526 568 607 9.6 10.8 12.0 13.2 13.8 12.6 14.4 15.6 16.8 18.0 19.2 21.6 23.4 25.2 27.0 28.8 32.4 35.4 38.4 40.8 39.0 43.2 47.4 51.0 54.6 57.6 64.8 70.8 76.2 81.6 77.4 86.4 94.8 103 109 96.6 108 118 128 136 116 130 142 154 164 155 173 190 205 219 194 217 237 256 274 290 324 355 383 410 386 432 473 511 547 7.7 8.6 9.6 10.6 11.0 10.1 11.5 12.5 13.4 14.4 15.4 17.3 18.7 20.2 21.6 23.0 25.9 28.3 30.7 32.6 31.2 34.6 37.9 40.8 43.7 46.1 51.8 56.6 61.0 65.3 61.9 69.1 75.8 82.1 87.4 77.3 86.4 94.6 102 109 93.1 104 114 123 132 124 138 152 164 175 155 173 190 205 219 232 259 284 307 328 309 346 379 409 437 6.4 7.2 8.0 8.8 9.2 8.4 9.6 10.4 11.2 12.0 12.8 14.4 15.6 16.8 18.0 19.2 21.6 23.6 25.6 27.2 26.0 28.8 31.6 34.0 36.4 38.4 43.2 47.2 50.8 54.4 51.6 57.6 63.2 68.4 72.8 64.4 72.0 78.8 85.2 90.8 77.6 86.4 94.8 102 110 103 115 126 136 146 129 144 158 171 182 193 216 237 256 274 258 288 316 341 364 5.5 6.2 6.9 7.5 7.9 7.2 8.2 8.9 9.6 10.3 11.0 12.3 13.4 14.4 15.4 16.5 18.5 20.2 21.9 23.3 22.3 24.7 27.1 29.1 31.2 32.9 37.0 40.5 43.5 46.6 44.2 49.4 54.2 58.6 62.4 55.2 61.7 67.5 73.0 77.8 66.5 74.1 81.3 87.8 93.9 88.5 98.7 108 117 125 111 124 135 146 156 166 185 203 219 235 221 247 271 292 312 Note: Always double check your application rates. See pages 149-163 for useful formulas and information. †Available in all brass, stainless steel, and hardened stainless steel only. Spacing Spray Height Optimum Spray Height 50 cm 65° 90 cm 80° 75 cm 110° 50 cm Reference technical section page 149 for more information. How to order: Specify tip number. Examples: TP8002-VS – Stainless Steel with VisiFlo color-coding TP11002-VP – Polymer with VisiFlo color-coding TP11001-VK – Ceramic with VisiFlo polymer color-coding TP11002-HSS – Hardened Stainless Steel TP8002-SS – Stainless Steel TP8002 – Brass TP11004-VB – Brass with VisiFlo color-coding BROADCAST NOZZLES 24/32 15 VisiFlo® Flat Spray Tips Features: ■ Tapered edge flat spray pattern for uniform coverage in broadcast spraying. ■ VisiFlo color-coded version available in stainless steel, ceramic and polymer in 80° or 110° spray angles in selected sizes. ■ Available in ceramic 80° capacities 01– 03 and 110° capacities 01– 02. See XR and XRC TeeJet® tips on pages 10 and 11 for larger capacities. ■ Available in brass in 110° spray angle only with VisiFlo color-coding. TP650050† TP800050† TP1100050† (100) TP650067† TP800067† TP1100067† (100) TP6501† TP8001 TP11001 (100) TP65015† TP80015 TP110015 (100) TP6502† TP8002 TP11002 (50) TP6503† TP8003 TP11003 (50) TP6504† TP8004 TP11004 (50) TP6505† TP8005 TP11005 (50) TP6506† TP8006 TP11006 (50) TP6508† TP8008 TP11008 (50) TP6510† TP8010† TP11010† (24) TP6515† TP8015† TP11015† TP6520† TP8020† TP11020† PSI CAPACITY ONE NOZZLE IN GPM 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 30 35 40 50 60 0.043 0.047 0.050 0.056 0.061 0.058 0.063 0.067 0.075 0.082 0.087 0.094 0.10 0.11 0.12 0.13 0.14 0.15 0.17 0.18 0.17 0.19 0.20 0.22 0.24 0.26 0.28 0.30 0.34 0.37 0.35 0.37 0.40 0.45 0.49 0.43 0.47 0.50 0.56 0.61 0.52 0.56 0.60 0.67 0.73 0.69 0.75 0.80 0.89 0.98 0.87 0.94 1.00 1.12 1.22 1.30 1.40 1.50 1.68 1.84 1.73 1.87 2.00 2.24 2.45 CAPACITY ONE NOZZLE IN OZ./MIN. 5.5 6.0 6.4 7.2 7.8 7.4 8.1 8.6 9.6 10 11 12 13 14 15 17 18 19 22 23 22 24 26 28 31 33 36 38 44 47 45 47 51 58 63 55 60 64 72 78 67 72 77 86 93 88 96 102 114 125 111 120 128 143 156 166 179 192 215 236 221 239 256 287 314 ■ Standard version (not color-coded) available in 15°, 25°, 40°, 50° and 65° spray angles in brass, stainless steel or hardened stainless steel. ■ See page 33 for TeeJet even flat spray tips. ■ Automatic spray alignment with 25612-*-NYR Quick TeeJet® cap and gasket. Reference page 55 for more information. ■ Automatic spray alignment for sizes 10 thru 20 with 25610-*-NYR Quick TeeJet cap and gasket. Reference page 55 for more information. 20⬙ GALLONS PER 1000 SQ. FT. GPA 4 MPH 5 MPH 6 MPH 3.2 3.5 3.7 4.2 4.5 4.3 4.7 5.0 5.6 6.1 6.5 7.0 7.4 8.2 8.9 9.7 10.4 11.1 12.6 13.4 12.6 14.1 14.9 16.3 17.8 19.3 21 22 25 27 26 27 30 33 36 32 35 37 42 45 39 42 45 50 54 51 56 59 66 73 65 70 74 83 91 97 104 111 125 137 128 139 149 166 182 2.6 2.1 2.8 2.3 3.0 2.5 3.3 2.8 3.6 3.0 3.4 2.9 3.7 3.1 4.0 3.3 4.5 3.7 4.9 4.1 5.2 4.3 5.6 4.7 5.9 5.0 6.5 5.4 7.1 5.9 7.7 6.4 8.3 6.9 8.9 7.4 10.1 8.4 10.7 8.9 10.1 8.4 11.3 9.4 11.9 9.9 13.1 10.9 14.3 11.9 15.4 12.9 16.6 13.9 17.8 14.9 20 16.8 22 18.3 21 17.3 22 18.3 24 19.8 27 22 29 24 26 21 28 23 30 25 33 28 36 30 31 26 33 28 36 30 40 33 43 36 41 34 45 37 48 40 53 44 58 49 52 43 56 47 59 50 67 55 72 60 77 64 83 69 89 74 100 83 109 91 103 86 111 93 119 99 133 111 146 121 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 1.6 1.7 1.9 2.1 2.3 2.2 2.3 2.5 2.8 3.0 3.2 3.5 3.7 4.1 4.5 4.8 5.2 5.6 6.3 6.7 6.3 7.1 7.4 8.2 8.9 9.7 10.4 11.1 12.6 13.7 13.0 13.7 14.9 16.7 18.2 16.0 17.4 18.6 21 23 19.3 21 22 25 27 26 28 30 33 36 32 35 37 42 45 48 52 56 62 68 64 69 74 83 91 0.10 0.11 0.11 0.13 0.14 0.13 0.14 0.15 0.17 0.19 0.20 0.21 0.23 0.25 0.27 0.29 0.32 0.34 0.39 0.41 0.39 0.43 0.45 0.50 0.54 0.59 0.63 0.68 0.77 0.84 0.79 0.84 0.91 1.0 1.1 0.97 1.1 1.1 1.3 1.4 1.2 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 2.2 2.0 2.1 2.3 2.5 2.8 2.9 3.2 3.4 3.8 4.2 3.9 4.2 4.5 5.1 5.6 0.07 0.08 0.09 0.10 0.10 0.10 0.11 0.11 0.13 0.14 0.15 0.16 0.17 0.19 0.20 0.22 0.24 0.26 0.29 0.31 0.29 0.32 0.34 0.37 0.41 0.44 0.48 0.51 0.58 0.63 0.60 0.63 0.68 0.77 0.83 0.73 0.80 0.85 0.95 1.0 0.88 0.95 1.0 1.1 1.2 1.2 1.3 1.4 1.5 1.7 1.5 1.6 1.7 1.9 2.1 2.2 2.4 2.6 2.9 3.1 2.9 3.2 3.4 3.8 4.2 0.06 0.06 0.07 0.08 0.08 0.08 0.09 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.19 0.20 0.23 0.24 0.23 0.26 0.27 0.30 0.33 0.35 0.38 0.41 0.46 0.50 0.48 0.50 0.54 0.61 0.67 0.58 0.64 0.68 0.76 0.83 0.71 0.76 0.82 0.91 0.99 0.94 1.0 1.1 1.2 1.3 1.2 1.3 1.4 1.5 1.7 1.8 1.9 2.0 2.3 2.5 2.4 2.5 2.7 3.0 3.3 1.3 1.4 1.5 1.7 1.8 1.7 1.9 2.0 2.2 2.4 2.6 2.8 3.0 3.3 3.6 3.9 4.2 4.5 5.0 5.3 5.0 5.6 5.9 6.5 7.1 7.7 8.3 8.9 10.1 11.0 10.4 11.0 11.9 13.4 14.6 12.8 14.0 14.9 16.6 18.1 15.4 16.6 17.8 19.9 22 20 22 24 26 29 26 28 30 33 36 39 42 45 50 55 51 56 59 67 73 1.1 1.2 1.2 1.4 1.5 1.4 1.6 1.7 1.9 2.0 2.2 2.3 2.5 2.7 3.0 3.2 3.5 3.7 4.2 4.5 4.2 4.7 5.0 5.4 5.9 6.4 6.9 7.4 8.4 9.2 8.7 9.2 9.9 11.1 12.1 10.6 11.6 12.4 13.9 15.1 12.9 13.9 14.9 16.6 18.1 17.1 18.6 19.8 22 24 22 23 25 28 30 32 35 37 42 46 43 46 50 55 61 0.85 0.93 0.99 1.1 1.2 1.1 1.2 1.3 1.5 1.6 1.7 1.9 2.0 2.2 2.4 2.6 2.8 3.0 3.4 3.6 3.4 3.8 4.0 4.4 4.8 5.1 5.5 5.9 6.7 7.3 6.9 7.3 7.9 8.9 9.7 8.5 9.3 9.9 11.1 12.1 10.3 11.1 11.9 13.3 14.5 13.7 14.9 15.8 17.6 19.4 17.2 18.6 19.8 22 24 26 28 30 33 36 34 37 40 44 49 0.64 0.70 0.74 0.83 0.91 0.86 0.94 0.99 1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.5 2.7 2.5 2.8 3.0 3.3 3.6 3.9 4.2 4.5 5.0 5.5 5.2 5.5 5.9 6.7 7.3 6.4 7.0 7.4 8.3 9.1 7.7 8.3 8.9 9.9 10.8 10.2 11.1 11.9 13.2 14.6 12.9 14.0 14.9 16.6 18.1 19.3 21 22 25 27 26 28 30 33 36 0.15 0.16 0.17 0.19 0.21 0.20 0.21 0.23 0.26 0.28 0.30 0.32 0.34 0.37 0.41 0.44 0.48 0.51 0.58 0.61 0.58 0.65 0.68 0.75 0.82 0.88 0.95 1.0 1.2 1.3 1.2 1.3 1.4 1.5 1.7 1.5 1.6 1.7 1.9 2.1 1.8 1.9 2.0 2.3 2.5 2.3 2.6 2.7 3.0 3.3 3.0 3.2 3.4 3.8 4.1 4.4 4.8 5.1 5.7 6.3 5.9 6.4 6.8 7.6 8.3 Note: Always double check your application rates. See pages 149-163 for useful formulas and information. †Available in all brass, stainless steel, and hardened stainless steel only. Spacing Spray Height Optimum Spray Height 20⬙ 65° 35⬙ 80° 30⬙ 110° 20⬙ Reference technical section page 149 for more information. How to order: Specify tip number. Examples: TP8002-VS – Stainless Steel with VisiFlo color-coding TP11002-VP – Polymer with VisiFlo color-coding TP11001-VK – Ceramic with VisiFlo polymer color-coding TP11002-HSS – Hardened Stainless Steel TP8002-SS – Stainless Steel TP8002 – Brass TP11004-VB – Brass with VisiFlo color-coding BROADCAST NOZZLES 25/32 15 Boomless Flat Spray Nozzles Typical Applications: Features: n Boomless field spray applications. n Roadside and right-of-way applications. n End row spraying. n Orchard spraying. n De-icing applications. n Forestry. n Unique orifice geometry produces a wide spray pattern while maintaining superior distribution across entire width. n Pre-orifice design minimizes drift. n Extra wide spray pattern — up to 18.5 feet (5.5 meters)— using a single nozzle. n Removable polymer pre-orifice. n Acetal or stainless steel construction for excellent chemical resistance. n Recommended spray pressure range: 20–60 PSI (1.5–4 bar). “X” “X” “L” “C” “R” “Y” “W” l/ha foR THRee nozzLes CenTeR nozzLe “C” bar “R”, “L” (B)1/4XP10R 1/4TTJ08 (B)1/4XP10L (B)1/4XP20R 1/4TTJ08 (B)1/4XP20L (B)1/4XP25R 1/4TTJ10 (B)1/4XP25L (B)1/2XP40R 1/4TTJ15 (B)1/2XP40L DRoP size 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC CaPaCiTy THRee nozzLes in l/min 7.85 9.04 11.1 12.2 13.2 13.4 15.4 18.9 20.7 22.3 16.5 19.1 23.5 25.6 27.5 26.6 31.0 37.7 40.8 44.4 nozzLe sPaCing “X” = 50 cm sPRay wiDTH “w” (meters) HeigHT “y” = 60 cm HeigHT “y” = 90 cm 60 cm HeigHT 90 cm HeigHT 4 km/h 8 km/h 12 km/h 16 km/h 24 km/h 32 km/h 4 km/h 8 km/h 12 km/h 16 km/h 24 km/h 32 km/h 6.2 7.0 7.8 8.6 9.0 6.4 8.0 9.2 9.8 10.2 7.4 8.4 9.2 9.8 10.2 7.8 9.0 9.6 10.2 10.8 7.0 7.8 8.6 9.2 9.8 7.8 8.4 9.6 10.2 10.8 7.8 9.2 9.8 10.2 10.8 8.4 9.8 10.4 10.8 11.6 190 194 213 213 220 314 289 308 317 328 334 341 383 392 404 512 517 589 600 617 95.0 96.9 107 106 110 157 144 154 158 164 167 171 192 196 202 256 258 295 300 308 63.3 64.6 71.2 70.9 73.3 105 96.3 103 106 109 111 114 128 131 135 171 172 196 200 206 47.5 48.4 53.4 53.2 55.0 78.5 72.2 77.0 79.2 82.0 83.6 85.3 95.8 98.0 101 128 129 147 150 154 31.7 32.3 35.6 35.5 36.7 52.3 48.1 51.4 52.8 54.7 55.7 56.8 63.9 65.3 67.4 85.3 86.1 98.2 100 103 23.7 24.2 26.7 26.6 27.5 39.3 36.1 38.5 39.6 41.0 41.8 42.6 47.9 49.0 50.6 63.9 64.6 73.6 75.0 77.1 168 174 194 199 202 258 275 295 304 310 317 311 360 376 382 475 474 544 567 574 84.1 86.9 96.8 99.5 101 129 138 148 152 155 159 156 180 188 191 238 237 272 283 287 56.1 57.9 64.5 66.3 67.3 85.9 91.7 98.4 101 103 106 104 120 125 127 158 158 181 189 191 42.1 43.5 48.4 49.7 50.5 64.4 68.8 73.8 76.1 77.4 79.3 77.9 89.9 94.1 95.5 119 119 136 142 144 28.0 29.0 32.3 33.2 33.7 42.9 45.8 49.2 50.7 51.6 52.9 51.9 59.9 62.7 63.7 79.2 79.1 90.6 94.4 95.7 21.0 21.7 24.2 24.9 25.3 32.2 34.4 36.9 38.1 38.7 39.7 38.9 45.0 47.1 47.7 59.4 59.3 68.0 70.8 71.8 l/ha foR THRee nozzLes CenTeR nozzLe “C” “R”, “L” (B)1/4XP10R 1/4TTJ06 (B)1/4XP10L (50) (B)1/4XP20R 1/4TTJ06 (B)1/4XP20L (50) (B)1/4XP25R 1/4TTJ08 (B)1/4XP25L (B)1/2XP40R 1/4TTJ10 (B)1/2XP40L (B)1/2XP80R 1/4TTJ15 (B)1/2XP80L bar DRoP size 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC CaPaCiTy THRee nozzLes in l/min 7.30 8.40 10.3 11.3 12.2 12.8 14.8 18.1 19.8 21.3 15.9 18.5 22.7 24.7 26.5 25.2 29.4 35.8 38.6 41.9 48.4 55.8 68.1 73.2 79.2 nozzLe sPaCing “X” = 75 cm sPRay wiDTH “w” (meters) HeigHT “y” = 60 cm 90 cm HeigHT 4 km/h 8 km/h 12 km/h 16 km/h 24 km/h 32 km/h 4 km/h 8 km/h 12 km/h 16 km/h 24 km/h 32 km/h 6.7 7.5 8.3 9.1 9.5 6.9 8.5 9.7 10.3 10.7 7.9 8.9 9.7 10.3 10.7 8.3 9.5 10.1 10.7 11.3 9.5 10.7 11.3 11.5 12.1 7.5 8.3 9.1 9.7 10.3 8.3 8.9 10.1 10.7 11.3 8.3 9.7 10.3 10.7 11.3 8.9 10.3 10.9 11.3 12.1 10.9 11.5 12.1 12.5 12.7 163 168 186 186 193 278 261 280 288 299 302 312 351 360 371 455 464 532 541 556 764 782 904 955 982 81.7 84.0 93.1 93.1 96.3 139 131 140 144 149 151 156 176 180 186 228 232 266 271 278 382 391 452 477 491 54.5 56.0 62.0 62.1 64.2 92.8 87.1 93.3 96.1 99.5 101 104 117 120 124 152 155 177 180 185 255 261 301 318 327 40.9 42.0 46.5 46.6 48.2 69.6 65.3 70.0 72.1 74.6 75.5 77.9 87.8 89.9 92.9 114 116 133 135 139 191 196 226 239 245 27.2 28.0 31.0 31.0 32.1 46.4 43.5 46.6 48.1 49.8 50.3 52.0 58.5 60.0 61.9 75.9 77.4 88.6 90.2 92.7 127 130 151 159 164 20.4 21.0 23.3 23.3 24.1 34.8 32.6 35.0 36.0 37.3 37.7 39.0 43.9 45.0 46.4 56.9 58.0 66.5 67.6 69.5 95.5 97.8 113 119 123 146 152 170 175 178 231 249 269 278 283 287 286 331 346 352 425 428 493 512 519 666 728 844 878 935 73.0 75.9 84.9 87.4 88.8 116 125 134 139 141 144 143 165 173 176 212 214 246 256 260 333 364 422 439 468 48.7 50.6 56.6 58.2 59.2 77.1 83.1 89.6 92.5 94.2 95.8 95.4 110 115 117 142 143 164 171 173 222 243 281 293 312 36.5 38.0 42.4 43.7 44.4 57.8 62.4 67.2 69.4 70.7 71.8 71.5 82.6 86.6 87.9 106 107 123 128 130 167 182 211 220 234 24.3 25.3 28.3 29.1 29.6 38.6 41.6 44.8 46.3 47.1 47.9 47.7 55.1 57.7 58.6 70.8 71.4 82.1 85.4 86.6 111 121 141 146 156 18.3 19.0 21.2 21.8 22.2 28.9 31.2 33.6 34.7 35.3 35.9 35.8 41.3 43.3 44.0 53.1 53.5 61.6 64.0 64.9 83.3 91.0 106 110 117 Medium Coarse Very Extremely Coarse Coarse note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C). See pages 173–187 for drop size classification, useful formulas and information. 32 HeigHT “y” = 90 cm 60 cm HeigHT (B)=BSPT Very Fine BOOMLESS NOZZLES 26/32 Fine Boomless Flat Spray Nozzles n NPT or BSPT (male) threads for easy installation. n Color-coding for easy capacity identification. How to order: Specify part number. Example: (B)1/2XP80L(R)-VS – VisiFlo® Stainless Steel left boom spray “X” “L” “R” “Y” “W” sPRay wiDTH CaPaCiTy “w” (meters) bar Two DRoP size nozzLe in l/min “R”, “L” (B)1/4XP10R (B)1/4XP10L (B)1/4XP20R (B)1/4XP20L (B)1/4XP25R (B)1/4XP25L (B)1/2XP40R (B)1/2XP40L (B)1/2XP80R (B)1/2XP80L 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC 5.62 6.46 7.90 8.52 9.10 11.1 12.9 15.7 17.0 18.2 13.7 15.9 19.5 21.0 22.4 22.4 26.2 31.8 34.0 36.8 44.2 51.0 62.2 66.4 71.6 nozzLe sPaCing “X” = 0–7 cm l/ha foR Two nozzLes HeigHT “y” = 60 cm 60 cm 90 cm HeigHT HeigHT 5.2 6.0 6.8 7.6 8.0 5.4 7.0 8.2 8.8 9.2 6.4 7.4 8.2 8.8 9.2 6.8 8.0 8.6 9.2 9.8 8.0 9.2 9.8 10.0 10.6 6.0 6.8 7.6 8.2 8.8 6.8 7.4 8.6 9.2 9.8 6.8 8.2 8.8 9.2 9.8 7.4 8.8 9.4 9.8 10.6 9.4 10.0 10.6 11.0 11.2 HeigHT “y” = 90 cm 4 6 8 10 12 16 20 25 30 35 4 6 8 10 12 16 20 25 30 35 km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h 162 162 174 168 171 308 276 287 290 297 321 322 357 358 365 494 491 555 554 563 829 832 952 996 1013 108 108 116 112 114 206 184 191 193 198 214 215 238 239 243 329 328 370 370 376 553 554 635 664 675 81.1 80.8 87.1 84.1 85.3 154 138 144 145 148 161 161 178 179 183 247 246 277 277 282 414 416 476 498 507 64.8 64.6 69.7 67.3 68.3 123 111 115 116 119 128 129 143 143 146 198 197 222 222 225 332 333 381 398 405 54.0 53.8 58.1 56.1 56.9 103 92.1 95.7 96.6 98.9 107 107 119 119 122 165 164 185 185 188 276 277 317 332 338 40.5 40.4 43.6 42.0 42.7 77.1 69.1 71.8 72.4 74.2 80.3 80.6 89.2 89.5 91.3 124 123 139 139 141 207 208 238 249 253 32.4 32.3 34.9 33.6 34.1 61.7 55.3 57.4 58.0 59.3 64.2 64.5 71.3 71.6 73.0 98.8 98.3 111 111 113 166 166 190 199 203 25.9 25.8 27.9 26.9 27.3 49.3 44.2 46.0 46.4 47.5 51.4 51.6 57.1 57.3 58.4 79.1 78.6 88.7 88.7 90.1 133 133 152 159 162 21.6 18.5 21.5 18.5 23.2 19.9 22.4 19.2 22.8 19.5 41.1 35.2 36.9 31.6 38.3 32.8 38.6 33.1 39.6 33.9 42.8 36.7 43.0 36.8 47.6 40.8 47.7 40.9 48.7 41.7 65.9 56.5 65.5 56.1 74.0 63.4 73.9 63.4 75.1 64.4 111 94.7 111 95.0 127 109 133 114 135 116 141 143 156 156 155 245 261 274 277 279 302 291 332 342 343 454 447 507 520 521 705 765 880 905 959 93.7 95.0 104 104 103 163 174 183 185 186 201 194 222 228 229 303 298 338 347 347 470 510 587 604 639 70.3 71.3 78.0 77.9 77.6 122 131 137 139 139 151 145 166 171 171 227 223 254 260 260 353 383 440 453 479 56.2 57.0 62.4 62.3 62.0 97.9 105 110 111 111 121 116 133 137 137 182 179 203 208 208 282 306 352 362 384 46.8 47.5 52.0 52.0 51.7 81.6 87.2 91.3 92.4 92.9 101 97.0 111 114 114 151 149 169 173 174 235 255 293 302 320 note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C). See pages 173–187 for drop size classification, useful formulas and information. 35.1 35.6 39.0 39.0 38.8 61.2 65.4 68.5 69.3 69.6 75.6 72.7 83.1 85.6 85.7 114 112 127 130 130 176 191 220 226 240 28.1 28.5 31.2 31.2 31.0 49.0 52.3 54.8 55.4 55.7 60.4 58.2 66.5 68.5 68.6 90.8 89.3 101 104 104 141 153 176 181 192 22.5 22.8 24.9 24.9 24.8 39.2 41.8 43.8 44.3 44.6 48.4 46.5 53.2 54.8 54.9 72.6 71.5 81.2 83.3 83.3 113 122 141 145 153 18.7 16.1 19.0 16.3 20.8 17.8 20.8 17.8 20.7 17.7 32.6 28.0 34.9 29.9 36.5 31.3 37.0 31.7 37.1 31.8 40.3 34.5 38.8 33.2 44.3 38.0 45.7 39.1 45.7 39.2 60.5 51.9 59.5 51.0 67.7 58.0 69.4 59.5 69.4 59.5 94.0 80.6 102 87.4 117 101 121 103 128 110 “R”, “L” “Y” “W” CaPaCiTy bar (B)1/4XP10R (B)1/4XP10L (B)1/4XP20R (B)1/4XP20L (B)1/4XP25R (B)1/4XP25L (B)1/2XP40R (B)1/2XP40L (B)1/2XP80R (B)1/2XP80L 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 1.5 2.0 3.0 3.5 4.0 one DRoP size nozzLe in l/min XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC 2.81 3.23 3.95 4.26 4.55 5.56 6.43 7.87 8.52 9.12 6.85 7.95 9.77 10.5 11.2 11.2 13.1 15.9 17.0 18.4 22.1 25.5 31.1 33.2 35.8 sPRay wiDTH “w” (meters) nozzLe sPaCing “X” = 0–7 cm l/ha foR singLe nozzLe HeigHT “y” = 60 cm 60 cm 90 cm HeigHT HeigHT 2.6 3.0 3.4 3.8 4.0 2.7 3.5 4.1 4.4 4.6 3.2 3.7 4.1 4.4 4.6 3.4 4.0 4.3 4.6 4.9 4.0 4.6 4.9 5.0 5.3 3.0 3.4 3.8 4.1 4.4 3.4 3.7 4.3 4.6 4.9 3.4 4.1 4.4 4.6 4.9 3.7 4.4 4.7 4.9 5.3 4.7 5.0 5.3 5.5 5.6 HeigHT “y” = 90 cm 4 6 8 10 12 16 20 25 30 35 4 6 8 10 12 16 20 25 30 35 km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h km/h 162 162 174 168 171 309 276 288 290 297 321 322 357 358 365 494 491 555 554 563 829 832 952 996 1013 108 108 116 112 114 206 184 192 194 198 214 215 238 239 243 329 328 370 370 376 553 554 635 664 675 81.1 80.8 87.1 84.1 85.3 154 138 144 145 149 161 161 179 179 183 247 246 277 277 282 414 416 476 498 507 64.8 64.6 69.7 67.3 68.3 124 110 115 116 119 128 129 143 143 146 198 197 222 222 225 332 333 381 398 405 54.0 53.8 58.1 56.1 56.9 103 91.9 96.0 96.8 99.1 107 107 119 119 122 165 164 185 185 188 276 277 317 332 338 40.5 40.4 43.6 42.0 42.7 77.2 68.9 72.0 72.6 74.3 80.3 80.6 89.4 89.5 91.3 124 123 139 139 141 207 208 238 249 253 32.4 32.3 34.9 33.6 34.1 61.8 55.1 57.6 58.1 59.5 64.2 64.5 71.5 71.6 73.0 98.8 98.3 111 111 113 166 166 190 199 203 note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C). See pages 173–187 for drop size classification, useful formulas and information. 25.9 25.8 27.9 26.9 27.3 49.4 44.1 46.1 46.5 47.6 51.4 51.6 57.2 57.3 58.4 79.1 78.6 88.7 88.7 90.1 133 133 152 159 162 21.6 18.5 21.5 18.5 23.2 19.9 22.4 19.2 22.8 19.5 41.2 35.3 36.7 31.5 38.4 32.9 38.7 33.2 39.7 34.0 42.8 36.7 43.0 36.8 47.7 40.9 47.7 40.9 48.7 41.7 65.9 56.5 65.5 56.1 74.0 63.4 73.9 63.4 75.1 64.4 111 94.7 111 95.0 127 109 133 114 135 116 141 143 156 156 155 245 261 275 278 279 302 291 333 342 343 454 447 507 520 521 705 765 880 905 959 (B)=BSPT 93.7 95.0 104 104 103 164 174 183 185 186 201 194 222 228 229 303 298 338 347 347 470 510 587 604 639 70.3 71.3 78.0 77.9 77.6 123 130 137 139 140 151 145 167 171 171 227 223 254 260 260 353 383 440 453 479 Very Fine 56.2 57.0 62.4 62.3 62.0 98.1 104 110 111 112 121 116 133 137 137 182 179 203 208 208 282 306 352 362 384 46.8 47.5 52.0 52.0 51.7 81.8 86.9 91.5 92.6 93.1 101 97.0 111 114 114 151 149 169 173 174 235 255 293 302 320 Fine 35.1 35.6 39.0 39.0 38.8 61.3 65.2 68.6 69.5 69.8 75.6 72.7 83.3 85.6 85.7 114 112 127 130 130 176 191 220 226 240 28.1 28.5 31.2 31.2 31.0 49.1 52.1 54.9 55.6 55.8 60.4 58.2 66.6 68.5 68.6 90.8 89.3 101 104 104 141 153 176 181 192 Medium Coarse 22.5 22.8 24.9 24.9 24.8 39.2 41.7 43.9 44.5 44.7 48.4 46.5 53.3 54.8 54.9 72.6 71.5 81.2 83.3 83.3 113 122 141 145 153 18.7 16.1 19.0 16.3 20.8 17.8 20.8 17.8 20.7 17.7 32.7 28.0 34.8 29.8 36.6 31.4 37.0 31.8 37.2 31.9 40.3 34.5 38.8 33.2 44.4 38.1 45.7 39.1 45.7 39.2 60.5 51.9 59.5 51.0 67.7 58.0 69.4 59.5 69.4 59.5 94.0 80.6 102 87.4 117 101 121 103 128 110 Very Extremely Coarse Coarse BOOMLESS NOZZLES 27/32 33 Boomless Flat Spray Nozzles Typical Applications: Features: n Boomless field spray applications. n Roadside and right-of-way applications. n End row spraying. n Orchard spraying. n De-icing applications. n Forestry. n Unique orifice geometry produces a wide spray pattern while maintaining superior distribution across entire width. n Pre-orifice design minimizes drift. n Extra wide spray pattern — up to 18.5 feet (5.5 meters)— using a single nozzle. n Removable polymer pre-orifice. n Acetal or stainless steel construction for excellent chemical resistance. n Recommended spray pressure range: 20–60 PSI (1.5–4 bar). “X” “X” “L” “C” “R” “Y” “W” nozzLe spaCing “X” = 209 CenteR nozzLe “C” psi “R”, “L” DRop size CapaCity thRee nozzLes in gpM height = 249 spRay wiDth “w” (Feet) 249 height gpa FoR thRee nozzLes height = 369 gaLLons peR 1000 sQ. Ft. gpa FoR thRee nozzLes gaLLons peR 1000 sQ. Ft. 4 6 8 10 15 20 2 3 4 5 4 6 8 10 15 20 2 3 4 5 369 height Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph (B)1/4Xp10R 1/4ttJ08 (B)1/4Xp10L 30 40 50 60 XC XC XC XC 2.43 2.80 3.13 3.42 23.3 25.3 28.3 29.3 25.3 28.3 30.3 32.3 12.9 13.7 13.7 14.4 8.6 9.1 9.1 9.6 6.5 6.8 6.8 7.2 5.2 5.5 5.5 5.8 3.4 3.7 3.6 3.9 2.6 2.7 2.7 2.9 0.59 0.63 0.63 0.66 0.39 0.42 0.42 0.44 0.30 0.31 0.31 0.33 0.24 0.25 0.25 0.26 11.9 12.2 12.8 13.1 7.9 8.2 8.5 8.7 5.9 6.1 6.4 6.6 4.8 4.9 5.1 5.2 3.2 3.3 3.4 3.5 2.4 2.4 2.6 2.6 0.54 0.56 0.59 0.60 0.36 0.37 0.39 0.40 0.27 0.28 0.29 0.30 0.22 0.22 0.23 0.24 (B)1/4Xp20R 1/4ttJ08 (B)1/4Xp20L 30 40 50 60 XC XC XC XC 4.19 4.80 5.39 5.98 26.3 30.3 32.3 33.3 27.3 31.3 33.3 35.3 19.7 19.6 21 22 13.1 9.9 13.1 9.8 13.8 10.3 14.8 11.1 7.9 7.8 8.3 8.9 5.3 5.2 5.5 5.9 3.9 3.9 4.1 4.4 0.90 0.90 0.95 1.0 0.60 0.60 0.63 0.68 0.45 0.45 0.47 0.51 0.36 0.36 0.38 0.41 19.0 19.0 20 21 12.7 12.7 13.4 14.0 9.5 9.5 10.0 10.5 7.6 7.6 8.0 8.4 5.1 5.1 5.3 5.6 3.8 3.8 4.0 4.2 0.87 0.87 0.92 0.96 0.58 0.58 0.61 0.64 0.43 0.43 0.46 0.48 0.35 0.35 0.37 0.38 (B)1/4Xp25R 1/4ttJ10 (B)1/4Xp25L 30 40 50 60 XC XC XC XC 5.13 6.00 6.62 7.22 27.3 30.3 32.3 33.3 30.3 32.3 33.3 35.3 23 25 25 27 15.5 16.3 16.9 17.9 11.6 9.3 12.3 9.8 12.7 10.1 13.4 10.7 6.2 6.5 6.8 7.2 4.7 4.9 5.1 5.4 1.1 1.1 1.2 1.2 0.71 0.75 0.77 0.82 0.53 0.56 0.58 0.61 0.43 0.45 0.46 0.49 21 23 25 25 14.0 15.3 16.4 16.9 10.5 8.4 11.5 9.2 12.3 9.8 12.7 10.1 5.6 6.1 6.6 6.7 4.2 4.6 4.9 5.1 0.96 1.1 1.1 1.2 0.64 0.70 0.75 0.77 0.48 0.53 0.56 0.58 0.38 0.42 0.45 0.46 (B)1/2Xp40R 1/4ttJ15 (B)1/2Xp40L 30 40 50 60 XC XC XC XC 8.36 9.50 10.8 11.8 29.3 31.3 33.3 35.3 32.3 34.3 35.3 38.3 35 38 40 41 24 25 27 28 17.7 18.8 20 21 14.1 9.4 15.0 10.0 16.1 10.7 16.5 11.0 7.1 7.5 8.0 8.3 1.6 1.7 1.8 1.9 1.1 1.1 1.2 1.3 0.81 0.86 0.92 0.95 0.65 0.69 0.74 0.76 32 34 38 38 21 23 25 25 16.0 17.1 18.9 19.1 12.8 8.5 13.7 9.1 15.1 10.1 15.3 10.2 6.4 6.9 7.6 7.6 1.5 1.6 1.7 1.7 0.98 1.0 1.2 1.2 0.73 0.78 0.87 0.87 0.59 0.63 0.69 0.70 nozzLe spaCing “X” = 309 CenteR nozzLe “C” “R”, “L” psi DRop size CapaCity thRee nozzLes in gpM height = 249 spRay wiDth “w” (Feet) 249 height gpa FoR thRee nozzLes gpa FoR thRee nozzLes gaLLons peR 1000 sQ. Ft. 4 6 8 10 15 20 2 3 4 5 4 6 8 10 15 20 2 3 4 5 369 height Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph Mph (B)1/4Xp10R 1/4ttJ06 (50) (B)1/4Xp10L 30 40 50 60 XC XC XC XC 2.26 2.60 2.91 3.17 25.0 27.0 30.0 31.0 27.0 30.0 32.0 34.0 11.2 11.9 12.0 12.7 7.5 7.9 8.0 8.4 5.6 6.0 6.0 6.3 4.5 4.8 4.8 5.1 3.0 3.2 3.2 3.4 2.2 2.4 2.4 2.5 0.51 0.55 0.55 0.58 0.34 0.36 0.37 0.39 0.26 0.27 0.27 0.29 0.20 0.22 0.22 0.23 10.4 10.7 11.3 11.5 6.9 7.2 7.5 7.7 5.2 5.4 5.6 5.8 4.1 4.3 4.5 4.6 2.8 2.9 3.0 3.1 2.1 2.1 2.3 2.3 0.47 0.49 0.52 0.53 0.32 0.33 0.34 0.35 0.24 0.25 0.26 0.26 0.19 0.20 0.21 0.21 (B)1/4Xp20R 1/4ttJ06 (50) (B)1/4Xp20L 30 40 50 60 XC XC XC XC 4.02 4.60 5.17 5.73 28.0 32.0 34.0 35.0 29.0 33.0 35.0 37.0 17.8 17.8 18.8 20 11.8 8.9 11.9 8.9 12.5 9.4 13.5 10.1 7.1 7.1 7.5 8.1 4.7 4.7 5.0 5.4 3.6 3.6 3.8 4.1 0.81 0.81 0.86 0.93 0.54 0.54 0.57 0.62 0.41 0.41 0.43 0.46 0.33 0.33 0.34 0.37 17.2 17.3 18.3 19.2 11.4 11.5 12.2 12.8 8.6 8.6 9.1 9.6 6.9 6.9 7.3 7.7 4.6 4.6 4.9 5.1 3.4 3.5 3.7 3.8 0.79 0.79 0.84 0.88 0.52 0.53 0.56 0.59 0.39 0.39 0.42 0.44 0.31 0.32 0.33 0.35 (B)1/4Xp25R 1/4ttJ08 (B)1/4Xp25L 30 40 50 60 XC XC XC XC 4.95 5.80 6.39 6.98 29.0 32.0 34.0 35.0 32.0 34.0 35.0 37.0 21 22 23 25 14.1 15.0 15.5 16.5 10.6 11.2 11.6 12.3 8.4 9.0 9.3 9.9 5.6 6.0 6.2 6.6 4.2 4.5 4.7 4.9 0.97 1.0 1.1 1.1 0.64 0.68 0.71 0.75 0.48 0.51 0.53 0.57 0.39 0.41 0.43 0.45 19.1 21 23 23 12.8 9.6 14.1 10.6 15.1 11.3 15.6 11.7 7.7 8.4 9.0 9.3 5.1 5.6 6.0 6.2 3.8 4.2 4.5 4.7 0.88 0.97 1.0 1.1 0.58 0.64 0.69 0.71 0.44 0.48 0.52 0.53 0.35 0.39 0.41 0.43 (B)1/2Xp40R 1/4ttJ10 (B)1/2Xp40L 30 40 50 60 XC XC XC XC 7.93 9.00 10.2 11.2 31.0 33.0 35.0 37.0 34.0 36.0 37.0 40.0 32 34 36 37 21 23 24 25 15.8 16.9 18.0 18.7 12.7 8.4 13.5 9.0 14.4 9.6 15.0 10.0 6.3 6.8 7.2 7.5 1.4 1.5 1.7 1.7 0.97 1.0 1.1 1.1 0.72 0.77 0.83 0.86 0.58 0.62 0.66 0.69 29 31 34 35 19.2 21 23 23 14.4 15.5 17.1 17.3 11.5 12.4 13.6 13.9 7.7 8.3 9.1 9.2 5.8 6.2 6.8 6.9 1.3 1.4 1.6 1.6 0.88 0.94 1.0 1.1 0.66 0.71 0.78 0.79 0.53 0.57 0.62 0.63 (B)1/2Xp80R 1/4ttJ15 (B)1/2Xp80L 30 40 50 60 XC XC XC XC 15.0 17.5 19.1 21.0 35.0 37.0 38.0 40.0 38.0 40.0 41.0 42.0 53 59 62 65 35 39 41 43 27 29 31 32 21 23 25 26 10.6 11.7 12.4 13.0 2.4 2.7 2.8 3.0 1.6 1.8 1.9 2.0 1.2 1.3 1.4 1.5 0.97 1.1 1.1 1.2 49 54 58 62 33 36 38 41 24 27 29 31 19.5 22 23 25 13.0 9.8 14.4 10.8 15.4 11.5 16.5 12.4 2.2 2.5 2.6 2.8 1.5 1.7 1.8 1.9 1.1 1.2 1.3 1.4 0.89 0.99 1.1 1.1 14.1 15.6 16.6 17.3 note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C). See pages 173–187 for drop size classification, useful formulas and information. 32 height = 369 gaLLons peR 1000 sQ. Ft. (B)=BSPT Very Fine BOOMLESS NOZZLES 28/32 Fine Medium Coarse Very Extremely Coarse Coarse Boomless Flat Spray Nozzles n NPT or BSPT (male) threads for easy installation. n Color-coding for easy capacity identification. how to order: Specify part number. Example: (B)1/2XP80L(R)-VS – VisiFlo® Stainless Steel left boom spray “X” “L” “R” “Y” “W” spRay wiDth CapaCity “w” (Feet) psi two DRop size nozzLe in gpM “R”, “L” (B)1/4Xp10R (B)1/4Xp10L (B)1/4Xp20R (B)1/4Xp20L (B)1/4Xp25R (B)1/4Xp25L (B)1/2Xp40R (B)1/2Xp40L (B)1/2Xp80R (B)1/2Xp80L 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC 1.42 1.74 2.00 2.24 2.44 2.84 3.50 4.00 4.50 5.00 3.48 4.26 5.00 5.50 6.00 5.74 7.06 8.00 9.10 10.0 11.2 13.7 16.0 17.5 19.2 249 369 height height 17.0 20.0 22.0 25.0 26.0 18.0 23.0 27.0 29.0 30.0 21.0 24.0 27.0 29.0 30.0 22.0 26.0 28.0 30.0 32.0 26.0 30.0 32.0 33.0 35.0 20.0 22.0 25.0 27.0 29.0 22.0 24.0 28.0 30.0 32.0 22.0 27.0 29.0 30.0 32.0 24.0 29.0 31.0 32.0 35.0 31.0 33.0 35.0 36.0 37.0 nozzLe spaCing “X” = 0–39 nozzLe spaCing “X” = 0–39 249 gpa FoR two nozzLes gaLLons peR 1000 sQ. Ft. gpa FoR two nozzLes 369 gaLLons peR 1000 sQ. Ft. 4 Mph 6 Mph 8 Mph 10 Mph 15 Mph 20 Mph 2 Mph 3 Mph 4 Mph 5 Mph 4 Mph 6 Mph 8 Mph 10 Mph 15 Mph 20 Mph 2 Mph 3 Mph 4 Mph 5 Mph 10.3 10.8 11.3 11.1 11.6 19.5 18.8 18.3 19.2 21 21 22 23 23 25 32 34 35 38 39 53 57 62 66 68 6.9 7.2 7.5 7.4 7.7 13.0 12.6 12.2 12.8 13.8 13.7 14.6 15.3 15.6 16.5 22 22 24 25 26 36 38 41 44 45 5.2 5.4 5.6 5.5 5.8 9.8 9.4 9.2 9.6 10.3 10.3 11.0 11.5 11.7 12.4 16.1 16.8 17.7 18.8 19.3 27 28 31 33 34 4.1 4.3 4.5 4.4 4.6 7.8 7.5 7.3 7.7 8.3 8.2 8.8 9.2 9.4 9.9 12.9 13.4 14.1 15.0 15.5 21 23 25 26 27 2.8 2.9 3.0 3.0 3.1 5.2 5.0 4.9 5.1 5.5 5.5 5.9 6.1 6.3 6.6 8.6 9.0 9.4 10.0 10.3 14.2 15.1 16.5 17.5 18.1 2.1 2.2 2.3 2.2 2.3 3.9 3.8 3.7 3.8 4.1 4.1 4.4 4.6 4.7 5.0 6.5 6.7 7.1 7.5 7.7 10.7 11.3 12.4 13.1 13.6 0.47 0.49 0.52 0.51 0.53 0.89 0.86 0.84 0.88 0.94 0.94 1.0 1.0 1.1 1.1 1.5 1.5 1.6 1.7 1.8 2.4 2.6 2.8 3.0 3.1 0.32 0.33 0.34 0.34 0.35 0.60 0.57 0.56 0.59 0.63 0.63 0.67 0.70 0.72 0.76 0.99 1.0 1.1 1.1 1.2 1.6 1.7 1.9 2.0 2.1 0.24 0.25 0.26 0.25 0.27 0.45 0.43 0.42 0.44 0.47 0.47 0.50 0.52 0.54 0.57 0.74 0.77 0.81 0.86 0.89 1.2 1.3 1.4 1.5 1.6 0.19 0.20 0.21 0.20 0.21 0.36 0.34 0.34 0.35 0.38 0.38 0.40 0.42 0.43 0.45 0.59 0.62 0.65 0.69 0.71 0.98 1.0 1.1 1.2 1.2 8.8 9.8 9.9 10.3 10.4 16.0 18.0 17.7 18.6 19.3 19.6 19.5 21 23 23 30 30 32 35 35 45 51 57 60 64 5.9 6.5 6.6 6.8 6.9 10.7 12.0 11.8 12.4 12.9 13.1 13.0 14.2 15.1 15.5 19.7 20 21 23 24 30 34 38 40 43 4.4 4.9 5.0 5.1 5.2 8.0 9.0 8.8 9.3 9.7 9.8 9.8 10.7 11.3 11.6 14.8 15.1 16.0 17.6 17.7 22 26 28 30 32 3.5 3.9 4.0 4.1 4.2 6.4 7.2 7.1 7.4 7.7 7.8 7.8 8.5 9.1 9.3 11.8 12.1 12.8 14.1 14.1 17.9 21 23 24 26 2.3 2.6 2.6 2.7 2.8 4.3 4.8 4.7 5.0 5.2 5.2 5.2 5.7 6.1 6.2 7.9 8.0 8.5 9.4 9.4 11.9 13.7 15.1 16.0 17.1 1.8 2.0 2.0 2.1 2.1 3.2 3.6 3.5 3.7 3.9 3.9 3.9 4.3 4.5 4.6 5.9 6.0 6.4 7.0 7.1 8.9 10.3 11.3 12.0 12.8 0.40 0.45 0.45 0.47 0.48 0.73 0.83 0.81 0.85 0.89 0.90 0.89 0.98 1.0 1.1 1.4 1.4 1.5 1.6 1.6 2.0 2.4 2.6 2.8 2.9 0.27 0.30 0.30 0.31 0.32 0.49 0.55 0.54 0.57 0.59 0.60 0.60 0.65 0.69 0.71 0.90 0.92 0.97 1.1 1.1 1.4 1.6 1.7 1.8 2.0 0.20 0.22 0.23 0.24 0.24 0.37 0.41 0.40 0.43 0.44 0.45 0.45 0.49 0.52 0.53 0.68 0.69 0.73 0.81 0.81 1.0 1.2 1.3 1.4 1.5 0.16 0.18 0.18 0.19 0.19 0.29 0.33 0.32 0.34 0.35 0.36 0.36 0.39 0.42 0.43 0.54 0.55 0.58 0.64 0.65 0.82 0.94 1.0 1.1 1.2 note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C). See pages 173–187 for drop size classification, useful formulas and information. “R”, “L” “Y” “W” CapaCity psi (B)1/4Xp10R (B)1/4Xp10L (B)1/4Xp20R (B)1/4Xp20L (B)1/4Xp25R (B)1/4Xp25L (B)1/2Xp40R (B)1/2Xp40L (B)1/2Xp80R (B)1/2Xp80L 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 one DRop size nozzLe in gpM XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC XC 0.71 0.87 1.00 1.12 1.22 1.42 1.75 2.00 2.25 2.50 1.74 2.13 2.50 2.75 3.00 2.87 3.53 4.00 4.55 5.00 5.60 6.83 8.00 8.73 9.60 spRay wiDth “w” (Feet) nozzLe spaCing “X” = 0–39 249 369 height height 8.5 10.0 11.0 12.5 13.0 9.0 11.5 13.5 14.5 15.0 10.5 12.0 13.5 14.5 15.0 11.0 13.0 14.0 15.0 16.0 13.0 15.0 16.0 16.5 17.5 10.0 11.0 12.5 13.5 14.5 11.0 12.0 14.0 15.0 16.0 11.0 13.5 14.5 15.0 16.0 12.0 14.5 15.5 16.0 17.5 15.5 16.5 17.5 18.0 18.5 nozzLe spaCing “X” = 0–39 249 gpa FoR one nozzLe gaLLons peR 1000 sQ. Ft. gpa FoR one nozzLe 369 gaLLons peR 1000 sQ. Ft. 4 Mph 6 Mph 8 Mph 10 Mph 15 Mph 20 Mph 2 Mph 3 Mph 4 Mph 5 Mph 4 Mph 6 Mph 8 Mph 10 Mph 15 Mph 20 Mph 2 Mph 3 Mph 4 Mph 5 Mph 10.3 10.8 11.3 11.1 11.6 19.5 18.8 18.3 19.2 21 21 22 23 23 25 32 34 35 38 39 53 56 62 65 68 6.9 7.2 7.5 7.4 7.7 13.0 12.6 12.2 12.8 13.8 13.7 14.6 15.3 15.6 16.5 22 22 24 25 26 36 38 41 44 45 5.2 5.4 5.6 5.5 5.8 9.8 9.4 9.2 9.6 10.3 10.3 11.0 11.5 11.7 12.4 16.1 16.8 17.7 18.8 19.3 27 28 31 33 34 4.1 4.3 4.5 4.4 4.6 7.8 7.5 7.3 7.7 8.3 8.2 8.8 9.2 9.4 9.9 12.9 13.4 14.1 15.0 15.5 21 23 25 26 27 2.8 2.9 3.0 3.0 3.1 5.2 5.0 4.9 5.1 5.5 5.5 5.9 6.1 6.3 6.6 8.6 9.0 9.4 10.0 10.3 14.2 15.0 16.5 17.5 18.1 2.1 2.2 2.3 2.2 2.3 3.9 3.8 3.7 3.8 4.1 4.1 4.4 4.6 4.7 5.0 6.5 6.7 7.1 7.5 7.7 10.7 11.3 12.4 13.1 13.6 0.47 0.49 0.52 0.51 0.53 0.89 0.86 0.84 0.88 0.94 0.94 1.0 1.0 1.1 1.1 1.5 1.5 1.6 1.7 1.8 2.4 2.6 2.8 3.0 3.1 0.32 0.33 0.34 0.34 0.35 0.60 0.57 0.56 0.59 0.63 0.63 0.67 0.70 0.72 0.76 0.99 1.0 1.1 1.1 1.2 1.6 1.7 1.9 2.0 2.1 0.24 0.25 0.26 0.25 0.27 0.45 0.43 0.42 0.44 0.47 0.47 0.50 0.52 0.54 0.57 0.74 0.77 0.81 0.86 0.89 1.2 1.3 1.4 1.5 1.6 0.19 0.20 0.21 0.20 0.21 0.36 0.34 0.34 0.35 0.38 0.38 0.40 0.42 0.43 0.45 0.59 0.62 0.65 0.69 0.71 0.98 1.0 1.1 1.2 1.2 8.8 9.8 9.9 10.3 10.4 16.0 18.0 17.7 18.6 19.3 19.6 19.5 21 23 23 30 30 32 35 35 45 51 57 60 64 5.9 6.5 6.6 6.8 6.9 10.7 12.0 11.8 12.4 12.9 13.1 13.0 14.2 15.1 15.5 19.7 20 21 23 24 30 34 38 40 43 4.4 4.9 5.0 5.1 5.2 8.0 9.0 8.8 9.3 9.7 9.8 9.8 10.7 11.3 11.6 14.8 15.1 16.0 17.6 17.7 22 26 28 30 32 3.5 3.9 4.0 4.1 4.2 6.4 7.2 7.1 7.4 7.7 7.8 7.8 8.5 9.1 9.3 11.8 12.1 12.8 14.1 14.1 17.9 20 23 24 26 2.3 2.6 2.6 2.7 2.8 4.3 4.8 4.7 5.0 5.2 5.2 5.2 5.7 6.1 6.2 7.9 8.0 8.5 9.4 9.4 11.9 13.7 15.1 16.0 17.1 1.8 2.0 2.0 2.1 2.1 3.2 3.6 3.5 3.7 3.9 3.9 3.9 4.3 4.5 4.6 5.9 6.0 6.4 7.0 7.1 8.9 10.2 11.3 12.0 12.8 0.40 0.45 0.45 0.47 0.48 0.73 0.83 0.81 0.85 0.89 0.90 0.89 0.98 1.0 1.1 1.4 1.4 1.5 1.6 1.6 2.0 2.3 2.6 2.7 2.9 0.27 0.30 0.30 0.31 0.32 0.49 0.55 0.54 0.57 0.59 0.60 0.60 0.65 0.69 0.71 0.90 0.92 0.97 1.1 1.1 1.4 1.6 1.7 1.8 2.0 0.20 0.22 0.23 0.24 0.24 0.37 0.41 0.40 0.43 0.44 0.45 0.45 0.49 0.52 0.53 0.68 0.69 0.73 0.81 0.81 1.0 1.2 1.3 1.4 1.5 0.16 0.18 0.18 0.19 0.19 0.29 0.33 0.32 0.34 0.35 0.36 0.36 0.39 0.42 0.43 0.54 0.55 0.58 0.64 0.65 0.82 0.94 1.0 1.1 1.2 note: Always double check your application rates. Tabulations are based on spraying water at 70°F (21°C). See pages 173–187 for drop size classification, useful formulas and information. (B)=BSPT Very Fine Fine Medium Coarse Very Extremely Coarse Coarse BOOMLESS NOZZLES 29/32 33 ">
/
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
