Garmin Edge Explore 2 Mode d'emploi

The document does not provide specific instructions on how to pair a Garmin Venu 2 watch with your Edge Explore 2 device. Compatible wireless sensors for the Edge Explore 2 include dedicated heart rate monitors (such as HRM-Pro™ or HRM-Dual™), power meters, Varia™ radars, and other cycling accessories, but a Garmin watch as such is not listed. Generally, Garmin watches like the Venu 2 function as independent activity tracking and GPS devices, rather than as sensors to be directly paired with another Edge device for data exchange. While Garmin devices can often synchronize with the Garmin Connect application on a smartphone, a direct connection between a Venu 2 watch and an Edge Explore 2 for data exchange is not described in this manual.

To get started with your Garmin Edge Explore 2, turn on the device and follow the on-screen instructions to choose the language and pair it with your smartphone via the Garmin Connect application. For optimal accuracy, make sure you are outdoors in a clear area during the initial satellite signal search. Once ready, ensure the satellite bars are green, select your cycling profile, then press the start button to launch the activity timer and begin your route. Configure your emergency contacts in the Garmin Connect application to take advantage of safety features like incident detection.

Turn on the device using the power button and follow the on-screen instructions to pair it with a smartphone via the Garmin Connect app. Before starting, ensure you are in an open outdoor area to acquire satellite signals. Once the satellite bars are green, select your cycling profile and press the start button to begin the activity timer.

To use the tempe™ wireless temperature sensor, ensure your device is within 3 meters of the sensor. Navigate to "Sélectionner > Capteurs > Ajouter capteur" on your device, then select "Tempe" or "Tout rechercher". Choose your sensor from the list and select "Ajouter".

To display temperature on your device, you need to customize your activity data screens. Go to "Profils d'activité" from the main menu, select the desired profile, then "Écrans de données". Choose an existing screen or add a new one, then edit the data fields to add the "Température" field.

To find and launch a saved course, select "Parcours" from the home screen. Browse the list to find the desired circuit, select it, and then press "Aller" to start navigation.

Pair a compatible wireless temperature sensor via the Sensors menu, then add the 'Temperature' data field to the data screens of your chosen activity profile.

Access the 'Courses' menu from the home screen, select the desired route from the list, and select 'Ride' to begin navigation.

To pair a wireless temperature sensor, place the device within 3 meters of the sensor, navigate to the Sensors menu, select Add Sensor, and choose the sensor from the list.

To see the temperature, go to Activity Profiles and select a profile. Choose Data Screens, then add or modify a data field to include the Temperature category. Note that body heat or direct sunlight can affect the reading accuracy.

To launch a saved course, select the Courses option from the home screen, browse the list to find the desired circuit, and select Go to begin navigation.