Sharp 25L-M180 Manuel utilisateur

25L-M100/180/S100/180
CL25M10,CL25S18
SERVICE MANUAL
S49F325L-M100
COLOR TELEVISION
Chassis No. SN-91
25L-M100/180
CL25M10
25L-S100/180
CL25S18
MODELS
25L-M100/180, 25L-S100/180
CL25M10, CL25S18
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its
original condition and only parts identical to those specified should be used.
CONTENTS
Page
» ELECTRICAL SPECIFICATIONS........................................................................................................ 1
» IMPORTANT SERVICE SAFETY PRECAUTION ............................................................................... 2
» LOCATION OF USER'S CONTROL .................................................................................................... 6
» INSTALLATION AND SERVICE INSTRUCTIONS ............................................................................ 10
» CHASSIS LAYOUT ........................................................................................................................... 16
» BLOCK DIAGRAM ............................................................................................................................ 18
» SCHEMATIC DIAGRAMS ................................................................................................................. 20
» PRINTED WIRING BOARD ASSEMBLIES ....................................................................................... 38
» REPLACEMENT PARTS LIST .......................................................................................................... 41
» PACKING OF THE SET ..................................................................................................................... 49
ELECTRICAL SPECIFICATIONS
POWER INPUT ................................................... 120 V AC 60 Hz
POWER RATING
25L-M100/180, CL25M10 ................................................. 105 W
25L-S100/180, CL25S18 .................................................. 110 W
PICTURE SIZE ........................................... 2,032cm2 (315sq inch)
CONVERGENCE ............................................................. Magnetic
SWEEP DEFLECTION ..................................................... Magnetic
FOCUS ............................................... Hi-Bi-Potential Electrostatic
INTERMEDIATE FREQUENCIES
Picture IF Carrier Frequency ..................................... 45.75 MHz
Sound IF Carrier Frequency ...................................... 41.25 MHz
Color Sub-Carrier Frequency ..................................... 42.17 MHz
(Nominal)
AUDIO POWER
25L-M100/180, CL25M10 ............... 1.3W (at 10% distortion and
Dual CH Operate)
25L-S100/180, CL25S18 .... 1.3W +1.3W (at 10% distortion and
Dual CH Operate)
SPEAKER
SIZE ...................................................................... 8 cm (Round)
VOICE COIL IMPEDANCE ............................. 32 ohm at 400 Hz
ANTENNA INPUT IMPEDANCE
VHF/UHF .................................................... 75 ohm Unbalanced
TUNING RANGES
VHF-Channels .............................................................. 2 thru 13
UHF-Channels ............................................................ 14 thru 69
CATV Channels .......................................................... 1 thru 125
(EIA, Channel Plan U.S.A.)
Specifications are subject to change without
prior notice.
This document has been published to be used for after
sales service only.
The contents are subject to change without notice.
SHARP CORPORATION
1
25L-M100/180/S100/180
CL25M10,CL25S18
IMPORTANT SERVICE SAFETY PRECAUTION
Service work should be performed only by qualified service technicians who are
thoroughly familiar with all safety checks and the servicing guidelines which follow:
WARNING
X-RADIATION AND HIGH VOLTAGE LIMITS
1. For continued safety, no modification of any circuit
should be attempted.
2. Disconnect AC power before servicing.
3. Semiconductor heat sinks are potential shock
hazards when the chassis is operating.
4. The chassis in this receiver has two ground systems
which are separated by insulating material. The nonisolated (hot) ground system is for the B+ voltage
regulator circuit and the horizontal output circuit. The
isolated ground system is for the low B+ DC voltages
and the secondary circuit of the high voltage
transformer.
To prevent electrical shock use an isolation
transformer between the line cord and power
receptacle, when servicing this chassis.
1. Be sure all service personnel are aware of the
procedures and instructions covering X-radiation. The
only potential source of X-ray in current solid state
TV receivers is the picture tube. However, the picture
tube does not emit measurable X-Ray radiation, if
the high voltage is as specified in the "High Voltage
Check" instructions.
It is only when high voltage is excessive that Xradiation is capable of penetrating the shell of the
picture tube including the lead in the glass material.
The important precaution is to keep the high voltage
below the maximum level specified.
2. It is essential that servicemen have available at all
times an accurate high voltage meter.
The calibration of this meter should be checked
periodically.
3. High voltage should always be kept at the rated value
−no higher. Operation at higher voltages may cause
a failure of the picture tube or high voltage circuitry
and;also, under certain conditions, may produce
radiation in exceeding of desirable levels.
4. When the high voltage regulator is operating properly
there is no possibility of an X-radiation problem. Every
time a color chassis is serviced, the brightness should
be tested while monitoring the high voltage with a
meter to be certain that the high voltage does not
exceed the specified value and that it is regulating
correctly.
5. Do not use a picture tube other than that specified or
make unrecommended circuit modifications to the
high voltage circuitry.
6. When trouble shooting and taking test measurements
on a receiver with excessive high voltage, avoid being
unnecessarily close to the receiver.
Do not operate the receiver longer than is necessary
to locate the cause of excessive voltage.
4A 125V
CAUTION: FOR CONTINUED
PROTECTION AGAINST A
RISK OF FIRE, REPLACE
ONLY WITH SAME TYPE 4A125V FUSE.
SERVICING OF HIGH VOLTAGE SYSTEM
AND PICTURE TUBE
When servicing the high voltage system,
remove the static charge by connecting a
10k ohm resistor in series with an insulated
wire (such as a test probe) between the picture tube ground and the anode lead. (AC
line cord should be disconnected from AC
outlet.)
1. Picture tube in this receiver employs integral
implosion protection.
2. Replace with tube of the same type number for
continued safety.
3. Do not lift picture tube by the neck.
4. Handle the picture tube only when wearing
shatterproof goggles and after discharging the high
voltage anode completely.
2
25L-M100/180/S100/180
CL25M10,CL25S18
IMPORTANT SERVICE SAFETY PRECAUTION
(Continued)
• Connect the resistor connection to all exposed metal
parts having a return to the chassis (antenna, metal
cabinet, screw heads, knobs and control shafts,
escutcheon and etc.) and measure the AC voltage
drop across the resistor.
AII checks must be repeated with the AC ine cord
plug connection reversed. (If necessary, a nonpolarized adapter plug must be used only for the
purpose of completing these check.)
Any current measured must not exceed 0.5 milliamp.
Any measurements not within the limits outlined
above indicate of a potential shock hazard and
corrective action must be taken before returning the
instrument to the customer.
BEFORE RETURNING THE RECEIVER
(Fire & Shock Hazard)
Before returning the receiver to the user, perform
the following safety checks.
1. Inspect all lead dress to make certain that leads are
not pinched or that hardware is not lodged between
the chassis and other metal parts in the receiver.
2. Inspect all protective devices such as non-metallic
control knobs, insulating materials, cabinet backs,
adjustment and compartment covers or shields,
isolation resistor-capacity networks, mechanical
insulators and etc.
3. To be sure that no shock hazard exists, check for
leakage current in the following manner.
• Plug the AC cord directly into a 120 volt AC outlet,
(Do not use an isolation transformer for this test).
• Using two clip leads, connect a 1.5k ohm, 10 watt
resistor paralleled by a 0.15µF capacitor in series with
all exposed metal cabinet parts and a known earth
ground, such as electrical conduit or electrical ground
connected to earth ground.
• Use an AC voltmeter having with 5000 ohm per volt,
or higher, sensitivity to measure the AC voltage drop
across the resistor.
AC
VOLTMETER
1.5k ohm
10W
0.15µF
TEST PROBE
TO EXPOSED
METAL PARTS
CONNECT TO
KNOWN EARTH
GROUND
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
SAFETY NOTICE
For continued protection, replacement parts must be
identical to those used in the original circuit. The use of
substitute replacement parts which do not have the same
safety characteristics as the factory recommended
replacement parts shown in this service manual, may
create shock, fire, X-radiation or other hazards.
Many electrical and mechanical parts in television
receivers have special safety-related characteristics.
These characteristics are often not evident from visual
inspection, nor can protection afforded by them be
necessarily increased by using replacement components
rated for higher voltage, wattage, etc.
Replacement parts which have these special safety
characteristics are identified in this manual; electrical
components having such features are identified by "å"
and shaded areas in the Replacement Parts Lists and
Schematic Diagrams.
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
3
25L-M100/180/S100/180
CL25M10,CL25S18
PRECAUTIONS A PRENDRE LORS DE LA REPARATION
Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement
accoutumé à toute vérification de sécurité et aux conseils suivants.
AVERTISSEMENT
LIMITES DES RADIATIONS X ET DE LA
HAUTE TENSION
1. N'entreprendre aucune modification de tout circuit.
C'est dangereux.
2. Débrancher le récepteur avant toute réparation.
3. Les déversoirs thermiques à semi-conducteurs
peuvent présenter un danger de choc électrique
lorsque le réceqteur est en marche.
4. Le châssis de ce récepteur possède deux systèmes
de masse qui sont séparées par du matériel
d'isolation. Le système de masse non-isolée (sous
tension) est pour le circuit du régulateur de tension
B+ et le circuit de sortie horizontale. Le système de
masse isolée est pour les tensions DC B+ basses et
le circuit secondaire du transformateur haute tension.
Pour éviter tout risque d'électrocution lors de
l'entretien de ce châssis, utiliser un transformateur
d'isolation entre le cordon de ligne et la prise de
courant.
4A 125V
1. Tout le personnel réparateur doit être instruit des
instructions et procédés relatifs aux radiations X.
Le tube-image, seule source de rayons X dons les
téleviseurs transistorisés, n'émet pourtant pas de
rayons mesurables si la haute tension est maintenue
à un niveau préconisé dans la section "Vérification
de la haute tension".
C'est seulement quand la haute tension est excessive
que les rayons X peuvent entrer dans l'enveloppe du
tube-image y compris le conducteur de verre. Il est
important de maintenir la haute tension en-dessous
du niveau spécifié.
2. Il est essentiel que le réparateur ait sous la main un
voltmètre à haute tension qui doit être périodiquement
étalonné.
3. La haute tension doit toujours être maintenue à la
valeur de régime -et pas plus haute. L'opération à
des tensions plus élevées peut entraîner une panne
du tube-image ou du circuit à haute tension et, dans
certaines conditions, peut entraîner une radiation
dépassant les niveaux préscrits.
4. Quand le régulateur à haute tension fonctionne
correctement, il n'y a aucun problème de radiation
X. Chaque fois qu'un châssis couleurs est réparé, la
luminosité doit être examinée bout en contrôlant la
haute tension à l'aide d'un voltmètre pour s'assurer
que la haute tension ne dépasse pas la valeur
spécifiée et qu'elle soit correctement réglée.
5. Ne pas utiliser un tube-image autre que celui spécifié
et ne pas effectuer de modifications déconseillées
du circuit à haute tension.
6. Lors de la recherche des pannes et des mesures
d'essai sur un récepteur qui présente une haute
tension excessive, éviter de s'approcher inutilement
du récepteur.
Ne pas faire fonctionner le récepteur plus longtemps
que nécessaire pour localiser la cause de la tension
excessive.
PRECAUTION: POUR LA
PROTECTION CONTINUE
CONTRE LES RISQUES
D'INCENDIE, REMPLACER LE
FUSIBLE PAR UN FUSIBLE DE
MEME TYPE 4A-125V.
REPARATION DU SYSTEME A HAUTE TENSION ET DU TUBE-IMAGE
Lors de la réparation de ce systéme,
supprimer la charge statique en branchant
une résistance de 10 kΩ en série avec un fil
isolé (comme une sonde d'essai) entre la
mise à la terre du tube-image et le fil
d'anodel. (Le corden d'alimentation doit être
retiré de la prise murale.)
1. Le tube image dans ce récepteur emploie une
protection intégrée contre l'implosion.
2. Par mesure de sécurité, changer le tube-image pour
un tube du même numéro de type.
3. Ne pas lever le tube-image par son col.
4. Ne manipuler le tube-image qu'en porant des lunettes
incassables et qu'après avoir déchargé totalement
la haute tension.
4
25L-M100/180/S100/180
CL25M10,CL25S18
PRECAUTIONS A PRENDRE LORS DE LA REPARATION
(Suite)
• Toucher avec la sonde d'essai les pièces métalliques
exposées qui présentent une voie de retour au
châssis (antenne, coffret métallique, tête des vis,
arbres de commande et des boutons, écusson, etc.)
et mesurer la chute de tension CA en-travers de la
résistance. Toutes les vérifications doivent être
refaites après avoir inversé la fiche du cordon
d'alimentation. (Si nécessaire, une prise d'adpatation
non polarisée peut être utilisée dans le but de terminer
ces vérifications.)
Tous les courants mesurés ne doivent pas dépasser
0.5 mA.
Dans le cas contraire, il y a une possibilité de choc
électrique qui doit être supprimée avant de rendre le
récepteur au client.
VERIFICATIONS CONTRE L'INCEN-DIE ET
LE CHOC ELECTRIQUE
Avant de rendre le récepteur à l'utilisateur, effectuer
les vérifications suivantes.
1. Inspecter tous les faisceaux de câbles pour s'assurer
que les fils ne soient pas pincés ou qu'un outil ne soit
pas placé entre le châssis et les autres pièces
métalliques du récepteur.
2. Inspecter tous les dispositifs de protection comme
les boutons de commande non-métalliques, les
isolants, le dos du coffret, les couvercles ou blindages
de réglage et de compartiment, les réseaux de
résistance-capacité, les isolateurs mécaniques, etc.
3. S'assurer qu'il n'y ait pas de danger d'électrocution
en vérifiant la fuite de courant, de la facon suivante:
• Brancher le cordon d'alimentation directem-ent à une
prise de courant de 120V. (Ne pas utiliser de
transformateur d'isolation pour cet essai).
• A l'aide de deux fils à pinces, brancher une résistance
de 1.5 kΩ 10 watts en parallèle avec un condensateur
de 0.15µF en série avec toutes les pièces métalliques
exposées du coffret et une terre connue comme une
conduite électrique ou une prise de terre branchée à
la terre.
• Utiliser un voltmètre CA d'une sensibilité d'au moins
5000Ω/V pour mesurer la chute de tension en travers
de la résistance.
Voltmètre CA
1.5k ohm
10W
0.15µF
SONDE D'ESSAI
AUX PIECES
METALLIQUES
EXPOSEES
BRANCHER A UNE
TERRE CONNUE
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
AVIS POUR LA SECURITE
identifiées par la marque " å " et hachurées dans la
liste des pièces de remplacement et les diagrammes
schématiques.
Pour assurer la protection, ces pièces doivent être
identiques à celles utilisées dans le circuit d'origine.
L'utilisation de pièces qui n'ont pas les mêmes
caractéristiques que les pièces recommandées par
l'usine, indiquées dans ce manuel, peut provoquer des
électrocutions, incendies, radiations X ou autres
accidents.
De nombreuses pièces, électriques et mécaniques, dans
les téléviseurs présentent des caractéristiques spéciales
relatives à la sécurité, qui ne sont souvent pas évidentes
à vue. Le degré de protection ne peut pas être
nécessairement augmentée en utilisant des pièces de
remplacement étalonnées pour haute tension,
puissance, etc.
Les pièces de remplacement qui présentent ces
caractéristiques sont identifiées dans ce manuel; les
pièces électriques qui présentent ces particularités sont
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
5
25L-M100/180/S100/180
CL25M10,CL25S18
LOCATION OF USER'S CONTROL
(25L-M100, CL25M10)
6
25L-M100/180/S100/180
CL25M10,CL25S18
LOCATION OF USER'S CONTROL(Continued)
(25L-M180)
7
25L-M100/180/S100/180
CL25M10,CL25S18
LOCATION OF USER'S CONTROL(Continued)
(25L-S100)
8
25L-M100/180/S100/180
CL25M10,CL25S18
LOCATION OF USER'S CONTROL(Continued)
(25L-S180, CL25S18)
9
25L-M100/180/S100/180
CL25M10,CL25S18
INSTALLATION AND SERVICE INSTRUCTIONS
Note:
(1) When performing any adjustments to resistor controls and transformers use non-metallic
screwdrivers or TV alignment tools.
(2) Before performing adjustments, the TV set must be on at least 15 minutes.
CIRCUIT PROTECTION
HIGH VOLTAGE CHECK
The receiver is protected by a 4.0A fuse
(F701), mounted on PWB-A, wired into one
side of the AC line input.
High voltage is not adjustable but must be checked
to verify that the receiver is operating within safe
and efficient design limitations as specified checks
should be as follows:
X-RADIATION PROTECTOR CIRCUIT TEST
1. Connect an accurate high voltage meter between
ground and anode of picture tube.
2. Operate receiver for at least 15 minutes at 120V AC
line voltage, with a strong air signal or a properly tuned
in test signal.
3. Enter the service mode and select the service
adjustment "S19" and Bus data "01" (Y-mute on).
4. The voltage should be approximately, 28.7kV (at zero
beam).
If a correct reading cannot be obtained, check circuitry
for malfunctioning components. After the voltage test,
make Y-mute off to the normal mode.
After service has been performed on the horizontal
deflection system, high voltage system, B+ system,
test the X-Radiation protection circuit to ascertain
proper operation as follows:
1) Apply 120V AC using a variac transformer for
accurate input voltage.
2) Allow for warm up and adjust all customer controls
for normal picture and sound.
3) Receive a good local channel.
4) Connect a digital voltmeter to TP653 and make sure
that the voltmeter reads 11.2 ±0.6V.
5) Apply external 13.8V DC at TP653 by using an
external DC supply, TV must be shut off.
6) To reset the protector, unplug the AC cord and make
a short circuit between TP651 and TP652. Now make
sure that normal picture appears on the screen.
7) If the operation of the horizontal oscillator does not
stop in step 5, the circuit must be repaired before the
set is returned to the customer.
10
25L-M100/180/S100/180
CL25M10,CL25S18
For adjustments of this model, the bus data is converted to various analog signals by the D/A converter
circuit.
Note: There are still a few analog adjustments in this series such as focus and master screen voltage.
Follow the steps below whenever the service adjustment is required. See "Table-B" to determine, if service adjustments are required.
1. Service mode
To enter the service mode and exit service mode.
Before putting unit into the service mode, check that
customer adjustments are in the normal mode. Use
the reset function in the video adjustment menu to
ensure customer controls are in their proper (reset)
position.
While pressing the Vol-up and Ch-up buttons at the
sametime, plug the AC cord into a wall socket.
Now the TV set is switched on and enters the service
mode.
To exit the service mode, turn the television off by
pressing the power button.
2. Service number selection
Once in the service mode, press the Ch-up or Chdown button on the remote controller or at the set.
The service adjustment number will vary in
increments of one, from "S01" to "OP"(25L-M100/180,
CL25M10), "S01" to "M05"(25L-S100/180, CL25S18).
Select the item you wish to adjust.
3. Data number selection
Press the Vol-up or down button to adjust the data
number.
DATA NUMBER
CHANNEL
SERVICE ADJUSTMENT NUMBER
S01
55(085)
Figure A.
11
02
25L-M100/180/S100/180
CL25M10,CL25S18
SERVICE
NUMBER
DATA
ADJUSTMENT ITEM
INITIAL VALUE
ADJUSTMENT CONTENTS
RANGE
S01
S02
S03
S04
S05
S06
S07
S08
S09
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
OP
PICTURE
TINT
COLOR
BRIGHTNESS
SHARPNESS
VERTICAL PHASE
HORIZONTAL PHASE
RF-AGC
VERTICAL AMP
VCO
R CUT-OFF
G CUT -OFF
B CUT-OFF
G GAIN
B GAIN
TRAP(3.58MHz)
BALANCE
C.C.POSITION
Y-MUTE
ENERGY SAVE OFFSET
D.D.E. OFFSET
OSD SETUP
TUNER SETUP
OPTION (Set to each mode)
55
46
32
40
24
00
12
23
20
2C
00
00
00
7F
7F
00
20
17
00
20
03
00
00
30
00-7F
00-7F
00-7F
00-7F
00-3F
00-07
00-1F
00-3F
00-3F
00-7F
00-FF
00-FF
00-FF
00-FF
00-FF
00 or 01
00-3F
00-7F
00,01,03
00-3F
00-1F
00-03
00,01
00-FF
M01
M02
M03
M04
M05
MTS LEVEL
STEREO-VCO
FILTER
LOW SEPARATION
HIGH SEPARATION
0A
20
1C
20
1B
00-0F
00-3F
00-3F
00-3F
00-3F
Must be set to "28"
Must be set to "00"
Must be set to "00"
Must be set to "20"
00= NORMAL, 01= No Y, 03= No VERTICAL
Must be set to "23"
Must be set to "03"
Must be set to "00"
Must be set to "00"
"0A"=25L-M180, "02"=25L-M100, CL25M10
"26"=25L-S100, "3E"=25L-S180, CL25S18
Only for Models
25L-S100/180, CL25S18
Table - A
Holding down both the CH-up/down buttons on the TV set at service mode for more than 2 seconds will automatically
write the above initial values into IC2101.
ADJUSTMENT
NOTES
PART REPLACED
NECESSARY
X
IC2001
IC201
UNNECESSARY
X
Data is stored in IC2101.
The adjustment is needed to compensate for characteristics
of parts including IC201 and MTS level (M01).
IC2101
X
Holding down both the CH-up/down buttons on the TV set in
the service mode for more than 2 seconds will automatically
write the above initial values into IC2101. Then perform a
complete adjustment.
CRT
X
Adjust items related to picture tube only.
X
Adjust items related to MTS only (M01~M05).
IC3001
(25L-S100/180, CL25S18)
Table - B
12
25L-M100/180/S100/180
CL25M10,CL25S18
SERVICE ADJUSTMENT
VCO Adjustment
White Balance Adjustment
1. Connect a digital voltmeter between pin (44) of IC201
and ground.
2. Receive a good local channel.
3. Enter the service mode and select the service
adjustment "S10".
4. Adjust the data so that digital voltmeter reads 2.2V.
5. Adjustment is completed, remove the voltmeter,
return to "normal" mode.
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustment "S03" and set to "00" (minimum
color)(Record original data code under adjustment
"S03" before changing). "S03" does not have to be
adjusted, if you selected a B/W picture or monoscope
pattern.
3. Alternately adjust service adjustment data of "S14"
and "S15" until a good grey scale with normal whites
is obtained.
4. Select the service adjustment "S03" and adjust data
to obtain normal color level.
RF AGC Adjustment
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustment "S08".
3. Set the data value to point where no noise or beat
appears.
4. Select another channel to confirm that no noise or
beat appears.
Note 1 : You will have to come out of the service mode
to select another channel.
Note 2 : Setting the data to "00" will produce a black
raster.
Sub-Picture Adjustment
1. Receive a good local channel.
2. Make sure the customer picture control is set to
maximum.
3. Enter the service mode and select the service
adjustment "S01".
4. Adjust the data value to achieve normal contrast
range.
Screen Adjustment
Sub-Tint Adjustment
1. Connect a oscilloscope between TP854 and GND on
the CRT Unit.
2. Receive a good local channel.
3. Enter the service mode and select the service
adjustment "S03" and set the data value to "00" to
set the color level to minimum. (Record original data
code under adjustment "S03" before changing) You
may skip this step, if you selected a B/W picture or
monoscope pattern.
4. Select the service adjustment "S19" and adjust the
data value to "01", this turn off the luminance signal
(Y-mute).
5. Select the service adjustment "S04" and adjust data
value to obtain 2.35 volts on the oscilloscope screen.
1. Receive a good local channel.
2. Set customer tint control to center of it's range.
3. Enter the service mode and select the service
adjustment "S02".
4. Adjust "S02" data value to obtain normal flesh tones.
Sub-Color Adjustment
1. Receive a good local channel.
2. Make sure the customer color control is set to center
position .
3. Enter the service mode and select service adjustment
"S03".
4. Adjust "S03" data value to obtain normal color level.
2.35 ±0.15VDC
GND
Figure B.
6. Adjust the master screen control until the raster
darkens to the point where raster is barely seen.
7. Adjust the service adjustments "S11" red, "S12" green
and "S13" blue to obtain a good grey scale with normal
whites at low brightness level.
8. Select the service adjustment "S19" and reset data
to "00". Select the service adjustment "S03" and reset
data to obtain normal color level.
9. Remove oscilloscope, and reset the master screen
control to obtain normal brightness range.
13
25L-M100/180/S100/180
CL25M10,CL25S18
Sub-Brightness Adjustment
3.58MHz Trap Adjustment
1. Receive a good local channel.
2. Make sure the customer brightness control is set to
center position.
3. Enter the service mode and select the service
adjustment "S04".
4. Adjust "S04" data value to obtain normal brightness
level.
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustment "S16".
3. This is a two position adjustment, "00" is ON, "01" is
OFF.
4. Adjust data value to "00" for normal viewing.
Vertical-Size Adjustments
Sharpness and Audio Balance Adjustments
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustment "S09".
3. While observing the top and bottom of the screen,
adjust "S09" data value to proper vertical size.
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustments "S05" for sharpness and "S17" for
balance.
» Sharpness adjustment
3. Adjust data value to "28"(center of data range) for
sharpness adjustment.
» Audio balance adjustment
4. Adjust data value to "20"(center of data range) for
Audio balance adjustment.
Vertical Phase Adjustment
1. Enter the service mode and select the service
adjustment "S06".
2. Adjust data value to "00".
Note: This must be set "00" when changed data retrace
line will appear.
Energy save offset Adjustment
Horizontal Position Adjustment
1. Enter the service mode and select the service
adjustment "S20".
2. Adjust data value to "23".
Note : This position is used to preset the level for the
energy save function.
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustment "S07".
3. Adjust "S07" data value so that picture is centered.
Other Adjustments
Caption Position Adjustment (Horizontal)
1. Enter the service mode.
2. Adjust the following data values as listed below.
1. Receive a good local channel.
2. Enter the service mode and select the service
adjustment "S18".
3. A black text box appears on the screen. (see Figure
C below)
4. Adjust "S18" data value so that text box is positioned
in the center of the screen.
Figure C.
14
S21
"03"
DDE OFFSET
S22
"00"
OSD SETUP
S23
"00"
TUNER SETUP
25L-M100/180/S100/180
CL25M10,CL25S18
MTS ADJUSTMENT
(Only for 25L-S100/180, CL25S18)
MTS Level Adjustment
1. Feed the following monaural signal to pin (14) of
IC3001.
Monaural signal : 300Hz, 245mVrms
2. Connect the rms voltmeter to pin (39) of IC3001.
3. Enter the service mode and select the service
adjustment "M01".
4. Adjust the data so that the rms voltmeter reads.
490 ±10mVrms.
MTS VCO Adjustment
1. Keep the unit in no-signal state.
2. Connect the frequency counter to pin (39) of IC3001.
3. Connect a capacitor (100µF, 50V) in between
positive(+) side of C3005 and ground.
4. Enter the service mode and select the service
adjustment "M02"
5. Adjust the data so that the frequency counter reads.
62.94 ±0.75kHz.
Filter Adjustment
1. Feed the following stereo pilot signal to pin (14) of
IC3001 .
Stereo pilot signal: 9.4kHz, 600mVrms.
2. Enter the service mode and select the service
adjustment "M03".
3. Adjust the data at the point where "OK" appears on
the screen. The "OK" represents the approximate
center of the adjustable range of the data.
Separation Adjustment
1. Connect the rms voltmeter to pin (39) of IC3001.
2. Receive the following composite stereo signal 1.
Composite stereo signal: 30% modulation, left
channel only, noise reduction on, 300Hz
3. Enter the service mode and select the service
adjustment "M04".
4. Adjust the data until the AC voltage reading of the
rms voltmeter is minimum.
5. Receive the following composite stereo signal 2.
Stereo signal: 30% modulation, left channel only,
noise reduction on, 3kHz
6. Enter the service mode and select the service
adjustment "M05".
7. Adjust the data until the AC voltage reading of the
rms voltmeter is minimum.
8. Take the above steps 1 thru 8 again for fine
adjustment.
15
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-M100/180, CL25M10 CHASSIS LAYOUT
PWB-B
H
PWB-H
G
PWB-A
F
E
D
C
B
A
1
1
2
2
3
4
3
5
64
16
7
5
8
9
6
10
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-S100/180, CL25S18 CHASSIS LAYOUT
PWB-B
H
PWB-H
G
PWB-A
F
E
D
C
B
A
10
11
1
12
2
13
143
15
17
4
16
17 5
18
6 19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-M100/180, CL25M10 BLOCK DIAGRAM
H
G
F
E
D
C
B
A
1
1
2
2
3
4
3
5
64
18
7
5
8
9
6
10
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-S100/180, CL25S18 BLOCK DIAGRAM
H
G
F
E
D
C
B
A
10
11
1
12
2
13
143
15
19
4
16
17 5
18
6 19
25L-M100/180/S100/180
CL25M10,CL25S18
DESCRIPTION OF SCHEMATIC DIAGRAM
WAVEFORM MEASUREMENT CONDITIONS:
1. Photographs taken on a standard gated color bar
signal, the tint setting adjusted for proper color. The
wave shapes at the red, green and blue cathodes of
the picture tube depend on the tint, color level and
picture control.
2.
indicates waveform check points (See chart,
waveforms are measured from point indicated to
chassis ground.)
NOTES:
H
1. The unit of resistance "ohm" is omitted.
(K=kΩ=1000Ω, M=MΩ)
2. All resistors are 1/16 watt, unless otherwise noted.
3. All capacitors are µ F, unless otherwise noted.
(P=pF=µµF)
4. (G) indicates ±2% tolerance may be used.
5.
indicates line isolated ground.
G
6.
indicates hot ground.
å AND SHADED (
VOLTAGE MEASUREMENT CONDITIONS:
1. All DC voltages are measured with DVM connected
between points indicated and chassis ground, line
voltage set at 120V AC and all controls set for normal
picture unless otherwise indicated.
2.
F All voltages measured with 1000µ V B & W or Color
signal.
) COMPONENTS
= SAFETY RELATED PARTS.
' MARK= X-RAY RELATED PARTS.
DRGANNES MARQUES å ET HACHRES (
):
PIECES RELATIVES A LA SECURITE.
MARQUE ' : PIECS RELATIVE AUX RAYONS X.
This circuit diagram is a standard one, printed circuits
may be subject to change for product improvement
without prior notice.
E
WAVEFORMS
D
C
B
A
1
2
3
4
5
6
20
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
SCHEMATIC DIAGRAM: CRT and FRONT AV Unit
H
G
F
E
D
Ë 25L-M100/180, CL25M10
Ë 25L-S100/180, CL25S10
C
B
A
10
11
1
12
2
13
143
15
21
4
16
17 5
18
6 19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-M100, CL25M10 SCHEMATIC DIAGRAM: MAIN-1 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
22
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
23
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-M100, CL25M10 SCHEMATIC DIAGRAM: MAIN-2 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
24
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
25
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-M180 SCHEMATIC DIAGRAM: MAIN-1 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
26
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
27
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-M180 SCHEMATIC DIAGRAM: MAIN-2 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
28
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
29
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-S100 SCHEMATIC DIAGRAM: MAIN-1 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
30
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
31
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-S100 SCHEMATIC DIAGRAM: MAIN-2 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
32
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
33
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-S180, CL25S18 SCHEMATIC DIAGRAM: MAIN-1 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
34
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
35
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
MODELS 25L-S180, CL25S18 SCHEMATIC DIAGRAM: MAIN-2 Unit
H
G
F
E
D
C
B
A
1
2
3
4
5
6
36
7
8
9
10
25L-M100/180/S100/180
CL25M10,CL25S18
10
11
12
13
14
15
37
16
17
18
19
25L-M100/180/S100/180
CL25M10,CL25S18
PRINTED WIRING BOARD ASSEMBLIES
H
G
F
E
D
C
B
A
PWB-A: MAIN Unit (Wiring Side)
1
1
2
2
3
4
3
5
64
38
7
5
8
9
6
10
25L-M100/180/S100/180
CL25M10,CL25S18
H
G
F
E
D
C
B
A
10
PWB-A: MAIN Unit (Chip Parts Side)
11
1
12
2
13
143
15
39
4
16
17 5
18
6 19
25L-M100/180/S100/180
CL25M10,CL25S18
H
G
F
E
PWB-B: CRT Unit (Wiring Side)
D
C
B
PWB-H: FRONT AV Unit (Wiring Side)
A
1
1
2
2
3
4
3
5
64
40
7
5
8
9
6
10
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
PARTS LIST
Part No.
★
Description
LISTE DES PIECES
Code
Ref. No.
Part No.
★
Description
Code
PARTS REPLACEMENT
CHANGE DES PIECES
Replacement parts which have these special safety characteristics
identified in this manual; electrical components having such features
are identified by å and shaded areas in the Replacement Parts Lists
and Schematic Diagrams. The use of a substitute replacement part
which dose no have the same safety characteristic as the factory
recommended replacement parts shown in this service manual may
create shock, fire or other hazards.
Les pi`eces de rechange qui pr élelesentent ces caract éleristiques
sp éleciales de s élecurit éle, sont identifi élees dans ce manuel : les
pi`eces élelectriques qui pr élesentent ces particularit éles, sont rep
éler élee par la marque å et sont hachur élees dans les listes de
pi`eces et dans les diagrammes sch élematiques.
La substitution d'une pi`ece de rechange par une autre qui ne pr
éLesente pas les m éoemes caract éLeristiques de s élecurit éle que
la pi`ece recommand élee parl'usine et dans ce manuel de service,
peut provoquer une éLelectrocution, un incendie ou toutautre sinistre.
"HOW TO ORDER REPLACEMENT PARTS"
To have your order filled promptly and correctly, please furnish the
following informations.
1. MODEL NUMBER
2. REF. NO.
3. PART NO.
4. DESCRIPTION
in USA:
"COMMENT COMMANDER LES PIECES DE RECHANGE"
Pour que votre commande soit rapidement et correctement remplie,
veuillez fournir les renseignements suivants.
Contact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor, Please call TollFree; 1-800-BE-SHARP
Ref. No.
★
Description
ç
V101
VB63AFW32X/*S
or
VB63AHC26X/*S
çå DY601 RCiLH0117MEZZ
or
RCiLH0118MEZZ
å L702
RCiLG0036MEZZ
MSPRT0002MEZZ
PMAGF3003CEZZ
QEARC2508MEZZ
M Picture Tube
CK
M Deflection Yoke
BA
M
M
M
M
BB
AA
AK
AF
Degaussing Coil
Spring for CRT
Magnet Ass'y
Grounding Part
MARQUE : PIECES RELATIVE AUX RAYONS X
Ref. No.
Code
Part No.
PWB-A:
PWB-A:
PWB-A:
PWB-A:
PICTURE TUBE
çå
4. DESCRIPTION
★MARQUE: SECTION LIVRAISON DES PIECES DE RECHANGE
MARK : X- RAY RELATED PARTS
Part No.
2. NO. DE REF
3. NO. DE PIECE
in CANADA: Contact SHARP Electronics of Conada Limited
Phone (416) 890-2100
★MARK: SPARE PARTS-DELIVERY SECTION
ç
1. NUMERO DU MODELE
Description
Code
DUNTK9806WEK0 (25L-M100/CL25M10)
DUNTK9806WEK1 (25L-M180)
DUNTK9806WEK2 (25L-S100)
DUNTK9806WEK3 (25L-S180/CL25S18)
MAIN UNIT
TUNER
NOTE: THE PARTS HERES SHOWN ARE SUPPLIED
AS AN ASSEMBLY BUT NOT INDEPENEDENTLY.
å TU51 VTU115B8035AT
M VHF Tuner
AU
or
VTUVTST5UF78/
INTEGRATED CIRCUITS
IC101 VHiKA78S05P-1
çå IC201 RH-iX3253CEZZ
IC351 VHiAN7511//-1
IC352
IC501
IC701
å IC702
å IC703
å IC750
å IC751
IC951
å
å
PRINTED WIRING BOARD ASSEMBLIES
(NOT REPLACEMENT ITEM)
PWB-A DUNTK9806WEK0 – MAIN Unit
(25L-M100, CL25M10)
PWB-A DUNTK9806WEK1 – MAIN Unit (25L-M180)
PWB-A DUNTK9806WEK2 – MAIN Unit (25L-S100)
PWB-A DUNTK9806WEK3 – MAIN Unit
(25L-S180, CL25S18)
PWB-B DUNTK9510WEK1 – CRT Unit
PWB-H DUNTK9310WEK0 – FRONT AV Unit
(25L-M100/180, CL25M10)
PWB-H DUNTK9310WEK1 – FRONT AV Unit
(25L-S100/180, CL25S18)
★
—
IC2001
IC2040
IC2101
IC3001
—
—
—
—
—
VHiAN7511//-1
VHiTA8403K/-1
VHiSTRF66261E
RH-FX0034CEZZ
VHiSE120N//-1
VHiKA7809Pi-1
VHiKA7809Pi-1
VHiMM1111XF1E
RH-iX3256CEZZ
VHiKiA7045P-1
VHiM24C01B/-1
VHiCXA2074Q-1
J KA78S05P
J TA1268AN
J I.C.
(25L-S100/180, CL25S18)
J I.C.
J TA8403K
J STR-F6626
J PC817
J SE120N
M KA7809PI
M KA7809PI
J MM1111XFBE
(25L-S100/180, CL25S18)
J TMPA8701CMF142
J KIA7045P
J M24C01-BN6
J CXA2074Q
(25L-S100/180, CL25S18)
AD
AV
AK
AK
AL
AX
AE
AG
AE
AE
AE
AX
AD
AF
AY
TRANSISTORS
—
You can substitute "VS2SD601AR/-1" for "VS2SC2412-C-1".
Q201 VS2SC2735//1E
J 2SC2735
AC
Q301 VS2SD601AR/-1
J 2SD601AR
AC
(25L-S100/180, CL25S18)
Q401 VS2SD601AR/-1
J 2SD601AR
AC
Q402 VS2SB709AR/-1
J 2SB709AR
AC
Q403 VS2SD601AR/-1
J 2SD601AR
AC
Q421 VS2SB709AR/-1
J 2SB709AR
AC
Q451 VS2SB709AR/-1
J 2SB709AR
AC
41
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
Part No.
PWB-A:
PWB-A:
PWB-A:
PWB-A:
å
★
Description
Code
Ref. No.
DUNTK9806WEK0 (25L-M100/CL25M10)
DUNTK9806WEK1 (25L-M180)
DUNTK9806WEK2 (25L-S100)
DUNTK9806WEK3 (25L-S180/CL25S18)
MAIN UNIT (Continued)
Q601
Q602
Q751
Q901
VS2SC2482//-1
VS2SD2539//1E
VS2SC3198-Y-1
VS2SD601AR/-1
J
J
J
J
Q902
VS2SD601AR/-1
J
Q903
VS2SD601AR/-1
J
Q904
VS2SD601AR/-1
J
Q2060 VS2SD601AR/-1
Q2201 VS2SD601AR/-1
Q2211 VS2SD601AR/-1
J
J
J
2SC2482
2SD2539
2SC3198 (Y)
2SD601AR
(25L-S180, CL25S18)
2SD601AR
(25L-S180, CL25S18)
2SD601AR
(25L-S180, CL25S18)
2SD601AR
(25L-S180, CL25S18)
2SD601AR
2SD601AR
2SD601AR
AD
AP
AA
AC
Code
J
J
J
J
J
Ceramic Filter
Ceramic Filter
Ceramic Filter
Ceramic Filter
SAW Filter
AD
AE
AD
AD
AH
COILS
L201
L202
L301
L302
L401
L402
L403
L404
L421
L672
å L701
L702
L705
L729
L2040
AC
AC
AC
AC
AC
AC
DIODES
VP-XF1R2K0000
RCiLi0588CEZZ
VP-XF8R2K0000
RCiLi0613CEZZ
VP-XF6R8K0000
VP-XF3R3K0000
VP-XF8R2K0000
VP-XF8R2K0000
VP-XF680K0000
RCiLZ0101MEZZ
RCiLF0025PEZZ
RCiLF0025PEZZ
RCiLP0179CEZZ
RCiLP0179CEZZ
RCiLB0159CEZZ
J
J
J
J
J
J
J
J
J
M
M
M
J
J
J
Peaking 1.2µH
VCO Coil
Peaking 8.2µH
IF Coil
Peaking 6.8µH
Peaking 3.3µH
Peaking 8.2µH
Peaking 8.2µH
Peaking 68µH
Coil
Coil
Coil
Coil
Coil
Oscillation Coil
AB
AF
AB
AE
AB
AB
AB
AB
AB
AE
AK
AK
AD
AD
AE
TRANSFORMERS
T601
çå T602
å T701
å T702
RTRNZ0057PEZZ R Transformer
RTRNF0037MEZZ M H-Volt Transformer
RTRNP0543CEZZ J Power Transformer
RTRNZ0017MEZZ M Transformer
AK
AY
AM
BC
CAPACITORS
[EL.··· Electrolytic, M-Poly.··· Metalized Polypro Film]
C51
VCEA0A1CW476M J 47
16V EL.
C53
VCEA0A1HW105M J 1.0
50V EL.
C54
VCEA0A1HW475M J 4.7
50V EL.
C55
VCEA0A1CW108M J 1000 16V EL.
C103 VCEA0A1CW107M J 100
16V EL.
(25L-M100, CL25M10)
C103 VCEA0A1CW228M J 2200 16V EL.
(25L-M180, 25L-S100/180,
CL25S18)
C201 VCKYMN1HB102K J 1000p 50V Ceramic
C202 VCKYCY1HF103Z J 0.01 50V Ceramic
C203 VCKYCY1HB102K J 1000p 50V Ceramic
C204 VCKYCY1HF103Z J 0.01 50V Ceramic
C205 VCEA0A1HW474M J 0.47 50V EL.
C206 VCEA0A1CW337M J 330
16V EL.
C207 VCKYCY1HF103Z J 0.01 50V Ceramic
C208 VCEA0A1HW474M J 0.47 50V EL.
C209 VCKYCY1HB222K J 2200p 50V Ceramic
C210 VCKYCY1HB102K J 1000p 50V Ceramic
C301 VCCCCY1HH330J J 33p
50V Ceramic
C302 VCCCCY1HH151J J 150p 50V Ceramic
C303 VCCCCY1HH390J J 39p
50V Ceramic
(25L-S100/180, CL25S18)
C303 VCKYCY1HB472K J 4700p 50V Ceramic
(25L-M100/180, CL25M10)
C304 VCEA0A1HW225M J 2.2
50V EL.
(25L-M100/180, CL25M10)
C307 VCCCCY1HH1R5C J 1.5p 50V Ceramic
C308 VCKYCY1HB102K J 1000p 50V Ceramic
C309 VCEA0A1CW337M J 330
16V EL.
C313 VCEA0A1CW476M J 47
16V EL.
C351 VCEA0A1HW106M J 10
50V EL.
(25L-S100/180, CL25S18)
C352 VCKYCY1HB332K J 3300p 50V Ceramic
(25L-S100/180, CL25S18)
C354 VCEA0A1HW106M J 10
50V EL.
(25L-S100/180, CL25S18)
C355 VCKYCY1HB332K J 3300p 50V Ceramic
C356 VCEA0A1HW106M J 10
50V EL.
C358 VCEA0A1CW477M J 470
16V EL.
C359 VCEA0A1HW106M J 10
50V EL.
C401 VCKYCY1HB331K J 330p 50V Ceramic
PACKAGED CIRCUITS
PR701 RMPTP0092CEZZ J Packaged Circuit
X801 RCRSB0205CEZZ J Crystal
or
RCRSB0001PEZZ
Description
FILTERS
CF301 RFiLC0029TAZZ
CF401 RFiLC0013CEZZ
CF631 RFiLA0034CEZZ
CF2040 RFiLC0121GEZZ
SF201 RFiLC0405CEZZ
You can substitute "VHD1SS119//-1" for "RH-DX0475CEZZ".
D51
RH-EX0611GEZZ J Zener Diode, 5.1V
AA
D52
RH-EX0673GEZZ J Zener Diode, 32V
AB
D53
RH-EX0611GEZZ J Zener Diode, 5.1V
AA
D103 VHD1SS119//-1
J Diode
AB
(25L-M180, 25L-S100/180,
CL25S18)
D401 VHD1SS119//-1
J Diode
AB
D402 RH-EX0604GEZZ J Zener Diode, 3.9V
AB
D454 RH-EX0611GEZZ J Zener Diode, 5.1V
AA
D455 VHD1SS119//-1
J Diode
AB
D456 VHD1SS119//-1
J Diode
AB
D457 RH-EX0217CEZZ J Zener Diode
AB
D458 RH-EX0217CEZZ J Zener Diode
AB
D459 VHD1SS119//-1
J Diode
AB
å D501
RH-DX0131CEZZ J Diode
AC
å D510
RH-DX0441CEZZ J Diode
AC
D621 RH-EX0631GEZZ J Zener Diode, 9.1V
AA
D622 RH-DX0131CEZZ J Diode
AC
çå D651
RH-DX0131CEZZ J Diode
AC
çå D652
RH-EX1313CEZZ M Zener Diode, 9.1V
AB
çå D653
VHD1SS119//-1
J Diode
AB
çå D654
VHD1SS119//-1
J Diode
AB
å D701
RH-DX0154CEZZ J Diode
AC
å D702
RH-DX0154CEZZ J Diode
AC
å D703
RH-DX0154CEZZ J Diode
AC
å D704
RH-DX0154CEZZ J Diode
AC
D705 VHD1SS82///1A
J Diode
AC
D706 RH-DX0066GEZZ J Diode
AB
D707 VHD1SS82///1A
J Diode
AC
D708 RH-DX0066GEZZ J Diode
AB
å D709
RH-DX0229CEZZ J Diode
AF
å D712
RH-DX0407CEZZ J Diode
AD
D713 RH-EX0673GEZZ J Zener Diode, 32V
AB
D715 RH-EX0610GEZZ J Zener Diode
AA
D716 VHD1SS119//-1
J Diode
AB
D717 RH-EX0650GEZZ J Zener Diode, 16V
AB
å D725
RH-DX0407CEZZ J Diode
AD
å D751
RH-DX0441CEZZ J Diode
AC
å D752
RH-DX0441CEZZ J Diode
AC
å D753
RH-DX0441CEZZ J Diode
AC
å D754
RH-DX0441CEZZ J Diode
AC
D755 VHD1SS119//-1
J Diode
AB
å D756
RH-DX0441CEZZ J Diode
AC
D2001 VHD1SS119//-1
J Diode
AB
å
★
Part No.
AH
AF
42
AB
AB
AB
AD
AC
AB
AA
AA
AA
AA
AB
AC
AA
AB
AA
AA
AA
AA
AA
AA
AB
AD
AA
AC
AB
AB
AA
AB
AA
AB
AC
AB
AA
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
Part No.
PWB-A:
PWB-A:
PWB-A:
PWB-A:
C402
C403
C404
C405
C406
C408
C409
C410
C411
C412
C413
C414
C421
C422
C451
C452
C453
C501
C502
C510
C511
C512
C513
C514
C515
C516
C517
C518
C551
C552
C606
C607
çå C610
çå C611
C615
C623
C631
C632
C633
C652
C653
C680
C682
å C701
C702
C703
å C705
å C706
C707
C708
C709
C710
C717
C718
C722
å C723
å C725
C726
C727
C729
å C730
å C731
C732
C741
C742
C753
C755
★
Description
Code
Ref. No.
DUNTK9806WEK0 (25L-M100/CL25M10)
DUNTK9806WEK1 (25L-M180)
DUNTK9806WEK2 (25L-S100)
DUNTK9806WEK3 (25L-S180/CL25S18)
MAIN UNIT (Continued)
VCCCCY1HH101J
VCKYCY1CB104K
VCEA0A1HW106M
VCEA0A1HW335M
VCEA0A1HW225M
VCEA0A1HW106M
VCEA0A1HW105M
RC-QZA104TAYK
VCEA0A1CW337M
VCKYCY1HB103K
VCKYCY1HB103K
VCKYCY1CB104K
VCCCCY1HH330J
VCEA0A1CW476M
RC-QZA104TAYK
VCEA0A1HW475M
VCEA0A1CW226M
VCKYPA2HB102K
VCEA0A1VW108M
VCFYSA1JA564J
VCKYPA2HB391K
RC-QZA473TAYK
RC-QZA103TAYK
VCEA0A1VW107M
VCEA0A1HW105M
VCEACA1HC105K
VCEA0A1VW108M
VCFYSA1JA473J
VCSATA1CE225K
VCEA0A1HW225M
VCKYPA2HB561K
VCKYPA1HB472K
VCFPVC3CA722H
VCFPVC3CA722H
VCKYPA2HB102K
VCEA4A2EN106M
VCEA0A1HW335M
RC-QZA103TAYK
VCEA0A1CW477M
VCEA0A1HW106M
VCEA0A1HW106M
VCFPVC2DB564J
VCKYPA2HB331K
RC-FZ017SCEZZ
or
RC-FZ012SGEZZ
RC-KZ0029CEZZ
RC-KZ0029CEZZ
RC-EZ0800CEZZ
RC-KZ0092GEZZ
VCFPVC3CA222H
VCCSPA1HL471J
VCEA0A1VW107M
RC-QZA102TAYJ
VCKYPA2HB472K
VCKYPA2HB472K
RC-QZA104TAYK
RC-EZ0724CEZZ
RC-EZ0809CEZZ
RC-KZ0338CEZZ
RC-KZ0338CEZZ
VCEA0A1CW106M
RC-EZ0385CEZZ
RC-EZ0385CEZZ
VCKYPA2HB102K
VCKYPA2HB102K
VCKYPA2HB102K
VCEA0A1CW107M
VCEA0A1CW476M
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
100p
0.1
10
3.3
2.2
10
1.0
0.1
330
0.01
0.01
0.1
33p
47
0.1
4.7
22
1000p
1000
0.56
390p
0.047
0.01
100
1.0
1.0
1000
0.047
2.2
2.2
560p
4700p
7200p
7200p
1000p
10
3.3
0.01
470
10
10
0.56
330p
0.22
50V Ceramic
16V Ceramic
50V EL.
50V EL.
50V EL.
50V EL.
50V EL.
50V Mylar
16V EL.
50V Ceramic
50V Ceramic
16V Ceramic
50V Ceramic
16V EL.
50V Mylar
50V EL.
16V EL.
500V Ceramic
35V EL.
63
Mylar
500V Ceramic
50V Mylar
50V Mylar
35V EL.
50V EL.
50V EL.
35V EL.
63
Mylar
16V Tantalum
50V EL.
500V Ceramic
50V Ceramic
1.6kV M-Poly.
1.6kV M-Poly.
500V Ceramic
250V EL.
50V EL.
50V Mylar
16V EL.
50V EL.
50V EL.
200V M-Poly.
500V Ceramic
AC250V Plastic
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
0.01 AC250V Ceramic
0.01 AC250V Ceramic
560
200V EL.
0.0033 AC250V Ceramic
2200p 1.6kV M-Poly.
470p 50V Ceramic
100
35V EL.
1000p
Mylar
4700p 500V Ceramic
4700p 500V Ceramic
0.1
50V Mylar
100
160V EL.
220
160V EL.
Capacitor
Capacitor
10
16V EL.
1000 16V EL.
1000 16V EL.
1000p 500V Ceramic
1000p 500V Ceramic
1000p 500V Ceramic
100
16V EL.
47
16V EL.
AA
AB
AB
AB
AB
AB
AB
AB
AC
AA
AA
AB
AA
AB
AB
AB
AB
AA
AD
AE
AA
AB
AA
AC
AB
AC
AD
AC
AB
AB
AA
AA
AF
AF
AA
AD
AB
AA
AC
AB
AB
AF
AA
AD
Part No.
★
Description
Code
J
J
J
J
J
J
J
J
J
J
470
35V EL.
0.022 50V Mylar
0.47 50V EL.
11p
50V Ceramic
0.1
16V Ceramic
0.1
16V Ceramic
0.1
16V Ceramic
220p 50V Ceramic
1000p 50V Ceramic
3.3
50V EL.
(25L-S180, CL25S18)
47
16V EL.
(25L-S180, CL25S18)
3.3
50V EL.
(25L-S180, CL25S18)
2.2
50V EL.
(25L-S100/180, CL25S18)
2.2
50V EL.
680p 50V Ceramic
(25L-S180, CL25S18)
680p 50V Ceramic
(25L-S180, CL25S18)
3.3
50V EL.
(25L-S180, CL25S18)
3.3
50V EL.
(25L-S180, CL25S18)
0.018 25V Ceramic
(25L-S180, CL25S18)
0.018 25V Ceramic
(25L-S180, CL25S18)
10
50V EL.
(25L-S100/180, CL25S18)
10
50V EL.
(25L-S100/180, CL25S18)
0.01 50V Ceramic
(25L-S100/180, CL25S18)
10
16V EL.
(25L-S100/180, CL25S18)
100p 50V Ceramic
100p 50V Ceramic
100
10V EL.
1.0
50V EL.
0.1
16V Ceramic
100p 50V Ceramic
100
10V EL.
680p 50V Ceramic
39p
50V Ceramic
4.7
50V EL.
100p 50V Ceramic
4.7
50V EL. (N.P)
(25L-S100/180, CL25S18)
5600p 50V Ceramic
(25L-S100/180, CL25S18)
0.012
Mylar
(25L-S100/180, CL25S18)
1.0
50V EL.
(25L-S100/180, CL25S18)
4.7
50V EL.
(25L-S100/180, CL25S18)
10
50V EL.
(25L-S100/180, CL25S18)
4.7
50V EL.
(25L-S100/180, CL25S18)
0.01 50V Ceramic
(25L-S100/180, CL25S18)
220
16V EL.
(25L-S100/180, CL25S18)
4.7
50V EL. (N.P)
(25L-S100/180, CL25S18)
4.7
50V EL.
(25L-S100/180, CL25S18)
4.7
50V EL. (N.P)
(25L-S100/180, CL25S18)
2700p 50V Ceramic
(25L-S100/180, CL25S18)
AB
AB
AB
AA
AB
AB
AB
AA
AA
AB
C772
C801
C802
C803
C804
C805
C806
C807
C808
C901
VCEA0A1VW477M
RC-QZA223TAYK
VCEA0A1HW474M
VCCCCY1HH110J
VCKYCY1CB104K
VCKYCY1CB104K
VCKYCY1CB104K
VCCCCY1HH221J
VCKYCY1HB102K
VCEA0A1HW335M
C902
VCEA0A1CW476M J
C903
VCEA0A1HW335M J
C908
VCEA0A1HW225M J
C909
C910
VCEA0A1HW225M J
VCKYCY1HB681K J
C911
VCKYCY1HB681K J
C922
VCEA0A1HW335M J
C923
VCEA0A1HW335M J
C931
VCKYCY1EB183K J
C932
VCKYCY1EB183K J
C951
VCEA0A1HW106M J
C952
VCEA0A1HW106M J
C954
VCKYCY1HF103Z
C955
VCEA0A1CW106M J
C2001
C2002
C2040
C2041
C2060
C2061
C2062
C2201
C2202
C2601
C2602
C3001
VCCCCY1HH101J
VCCCCY1HH101J
VCEA0A1AW107M
VCEA0A1HW105M
VCKYCY1CB104K
VCCCCY1HH101J
VCEA0A1AW107M
VCKYCY1HB681K
VCCCCY1HH390J
VCEA0A1HW475M
VCCCCY1HH101J
VCE9GA1HW475M
J
J
J
J
J
J
J
J
J
J
J
J
J
C3002 VCKYCY1HB562K J
AC
AC
AQ
AC
AE
AA
AC
AB
AB
AB
AB
AG
AL
AD
AD
AB
AE
AE
AA
AA
AA
AC
AB
C3003 RC-QZA123TAYK
J
C3004 VCEA0A1HW105M J
C3005 VCEA0A1HW475M J
C3006 VCEA0A1HW106M J
C3007 VCEA0A1HW475M J
C3008 VCKYCY1HF103Z
J
C3009 VCEA0A1CW227M J
C3010 VCE9GA1HW475M J
C3011 VCEA0A1HW475M J
C3012 VCE9GA1HW475M J
C3013 VCKYCY1HB272K J
43
AB
AB
AB
AB
AA
AA
AB
AB
AA
AA
AB
AB
AA
AB
AA
AA
AB
AB
AB
AA
AB
AA
AA
AB
AA
AB
AA
AB
AB
AB
AB
AB
AA
AC
AB
AB
AB
AA
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
★
Part No.
PWB-A:
PWB-A:
PWB-A:
PWB-A:
Description
Code
Ref. No.
DUNTK9806WEK0 (25L-M100/CL25M10)
DUNTK9806WEK1 (25L-M180)
DUNTK9806WEK2 (25L-S100)
DUNTK9806WEK3 (25L-S180/CL25S18)
MAIN UNIT (Continued)
C3014 RC-QZA473TAYK
C3015 VCSATA1CE335K
C3016 VCE9GA1HW475M
C3017 VCSATA1CE106K
C3018 VCEA0A1HW105M
C3019 VCEA0A1HW475M
C3020 VCEA0A1HW475M
C3021 VCEA0A1HW475M
C3022 VCEA0A1HW475M
J 0.047
Mylar
(25L-S100/180, CL25S18)
J 3.3
16V Tantalum
(25L-S100/180, CL25S18)
J 4.7
50V EL. (N.P)
(25L-S100/180, CL25S18)
J 10
16V Tantalum
(25L-S100/180, CL25S18)
J 1.0
50V EL.
(25L-S100/180, CL25S18)
J 4.7
50V EL.
(25L-S100/180, CL25S18)
J 4.7
50V EL.
J 4.7
50V EL.
(25L-S100/180, CL25S18)
J 4.7
50V EL.
(25L-S100/180, CL25S18)
RJ60
RJ61
RJ63
RJ64
RJ67
å R51
å R52
å R53
R54
R55
R56
R57
R201
R202
R203
R204
R205
R206
R207
R208
R301
R302
R303
AB
AC
AB
AD
AB
AB
AB
AB
AB
R303
RESISTORS
RJ1
RJ5
RJ6
RJ9
RJ10
RJ11
RJ12
RJ13
RJ14
RJ15
RJ16
RJ17
RJ18
RJ19
RJ20
RJ21
RJ22
RJ25
RJ26
RJ28
RJ29
RJ30
RJ31
RJ32
RJ35
RJ36
RJ37
RJ38
RJ39
RJ40
RJ41
RJ42
RJ43
RJ46
RJ48
RJ49
RJ50
RJ51
RJ52
RJ54
RJ55
RJ57
RJ58
[M-Ox.··· Metal Oxide.]
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
(25L-M100/180, CL25M10)
VRD-MN2BE000J J 0
1/8W
Carbon
(25L-M100/180, CL25M10)
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
(25L-S100/180, CL25S18)
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
(25L-M100/180, CL25M10)
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-CY1JF000J
J 0
1/16W M-Ox.
(25L-M180, 25L-S100/180,
CL25S18)
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
R304
AA
AA
R305
AA
R306
AA
AA
AA
AA
AA
AA
R351
R352
R353
R354
AA
AA
AA
AA
R355
R356
R357
R358
R401
R402
R403
R404
R405
R406
R407
R408
R409
R410
R411
R412
R413
R414
R415
R421
R422
R423
R424
å R451
R452
R453
R454
R456
R458
å R501
R510
R511
R512
R513
R514
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
44
Part No.
★
Description
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRD-MN2BE000J J 0
1/8W
Carbon
VRD-MN2BE000J J 0
1/8W
Carbon
VRS-CY1JF000J
J 0
1/16W M-Ox.
VRS-RG3AB151J M 150 1W
M-Ox.
VRS-RG3DB123J J 12k 2W
M-Ox.
VRS-RG3AB470J J 47 1W
M-Ox.
VRD-MN2BE101J J 100 1/8W
Carbon
VRD-MN2BE101J J 100 1/8W
Carbon
VRD-MN2BE823J J 82k 1/8W
Carbon
VRD-MN2BE392J J 3.9k 1/8W
Carbon
VRD-MN2BE151J J 150 1/8W
Carbon
VRD-MN2BE122J J 1.2k 1/8W
Carbon
VRD-MN2BE682J J 6.8k 1/8W
Carbon
VRD-MN2BE270J J 27 1/8W
Carbon
VRS-CY1JF331J
J 330 1/16W M-Ox.
VRD-MN2BE121J J 120 1/8W
Carbon
VRD-MN2BE4R7J J 4.7 1/8W
Carbon
VRD-MN2BE331J J 330 1/8W
Carbon
VRD-MN2BE222J J 2.2k 1/8W
Carbon
VRS-CY1JF102J
J 1.0k 1/16W M-Ox.
VRD-MN2BE103J J 10k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE153J J 15k 1/8W
Carbon
(25L-M100/180, CL25M10)
VRD-MN2BE333J J 33k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE102J J 1.0k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE152J J 1.5k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE683J J 68k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE103J J 10k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-RA2BE822J J 8.2k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE223J J 22k 1/8W
Carbon
(25L-S100/180, CL25S18)
VRD-MN2BE683J J 68k 1/8W
Carbon
VRD-MN2BE103J J 10k 1/8W
Carbon
VRD-MN2BE822J J 8.2k 1/8W
Carbon
VRD-MN2BE223J J 22k 1/8W
Carbon
VRS-CY1JF682J
J 6.8k 1/16W M-Ox.
VRS-CY1JF331J
J 330 1/16W M-Ox.
VRS-CY1JF391J
J 390 1/16W M-Ox.
VRD-MN2BE102J J 1.0k 1/8W
Carbon
VRS-CY1JF470J
J 47 1/16W M-Ox.
VRS-CY1JF680J
J 68 1/16W M-Ox.
VRS-CY1JF102J
J 1.0k 1/16W M-Ox.
VRS-CY1JF471J
J 470 1/16W M-Ox.
VRD-MN2BE562J J 5.6k 1/8W
Carbon
VRD-RA2BE124J J 120k 1/8W
Carbon
VRD-MN2BE153J J 15k 1/8W
Carbon
VRD-RA2BE561J J 560 1/8W
Carbon
VRS-CY1JF101J
J 100 1/16W M-Ox.
VRS-CY1JF101J
J 100 1/16W M-Ox.
VRS-CY1JF101J
J 100 1/16W M-Ox.
VRD-MN2BE152J J 1.5k 1/8W
Carbon
VRS-CY1JF472J
J 4.7k 1/16W M-Ox.
VRS-CY1JF152J
J 1.5k 1/16W M-Ox.
VRS-CY1JF102J
J 1.0k 1/16W M-Ox.
VRS-RG2HC103J J 10k 1/2W
M-Ox.
VRD-RM2HD153J J 15k 1/2W
Carbon
VRD-RA2EE683J J 68k 1/4W
Carbon
VRD-MN2BE102J J 1.0k 1/8W
Carbon
VRD-MN2BE682J J 6.8k 1/8W
Carbon
VRD-MN2BE152J J 1.5k 1/8W
Carbon
VRN-RL3ABR56J J 0.56 1W
Metal Film
VRD-MN2BE471J J 470 1/8W
Carbon
VRD-RA2BE104G J 100k 1/8W
Carbon
VRD-RA2BE124G J 120k 1/8W
Carbon
VRD-RA2BE473J J 47k 1/8W
Carbon
VRD-MN2BE101J J 100 1/8W
Carbon
Code
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
Part No.
PWB-A:
PWB-A:
PWB-A:
PWB-A:
R519
R520
R523
å R524
R526
R551
R552
R553
R554
å R604
R605
R606
å R607
å R609
R610
å R611
R622
R623
R624
R625
R626
R627
R631
R632
R633
R634
çå R651
çå R652
çå R653
çå R654
çå R655
R690
å R701
å R702
R704
å R705
å R706
R707
å R709
R710
R711
å R715
å R723
R724
R725
R727
å R728
å
å
★
Description
Code
Ref. No.
DUNTK9806WEK0 (25L-M100/CL25M10)
DUNTK9806WEK1 (25L-M180)
DUNTK9806WEK2 (25L-S100)
DUNTK9806WEK3 (25L-S180/CL25S18)
MAIN UNIT (Continued)
VRD-RA2BE123G
VRD-MN2BE184J
VRN-RL3AB1R0J
VRS-RG3AB391J
VRD-MN2BE332J
VRS-CY1JF472J
VRS-CY1JF102J
VRD-MN2BE223J
VRD-MN2BE184J
VRS-RG3LB392J
VRD-RA2BE331J
VRD-RA2BE331J
VRS-RG3LB392J
VRS-RG3AB562J
VRD-RM2HD220J
VRS-KA3NG3R3K
VRN-RL3ABR33J
VRN-RL3AB2R7J
VRS-RG3DB332J
VRD-MN2BE102J
VRN-RL3AB3R3J
VRD-RM2HD224J
VRS-CY1JF391J
VRS-CY1JF152J
VRD-MN2BE472J
VRD-RA2BE4R7J
VRS-RG2HC270J
VRN-RA2BK103F
VRN-RA2BK822F
VRD-MN2BE184J
VRS-CY1JF104J
VRS-RG2HC102J
RR-HZ0048CEZZ
VRW-KQ3NC1R2K
VRD-RM2HD154J
VRN-RL3DBR22J
VRN-RL3DBR27J
VRS-RG2HC681J
VRN-GA2EB1R0J
VRD-RM2HD330J
VRD-RA2BE242J
VRS-RG3DB153J
VRN-RL3DBR39J
VRS-RG2HC332J
VRS-RG2HC821J
VRD-RA2BE271J
VRN-RL3LB4R7J
J
J
M
J
J
J
J
J
J
M
J
J
M
M
J
J
M
M
M
J
M
J
J
J
J
J
M
J
J
J
J
J
J
J
J
J
M
J
J
J
J
J
M
J
M
J
M
R728
VRS-RG3DB120J
M
R734
R737
R751
R801
R802
R803
R804
R805
R806
R807
R808
R901
VRD-RM2HD124J J
VRN-RL3DBR56J M
VRD-MN2BE473J J
VRD-MN2BE332J J
VRS-CY1JF332J
J
VRS-CY1JF222J
J
VRS-CY1JF222J
J
VRS-CY1JF222J
J
VRS-CY1JF333J
J
VRS-CY1JF152J
J
VRD-RA2BE102J J
VRD-RA2BE331J J
R903
VRD-MN2BE102J
J
R904
VRS-CY1JF683J
J
R905
VRS-CY1JF223J
J
12k 1/8W
Carbon
180k 1/8W
Carbon
1.0 1W
Metal Film
390 1W
M-Ox.
3.3k 1/8W
Carbon
4.7k 1/16W M-Ox.
1.0k 1/16W M-Ox.
22k 1/8W
Carbon
180k 1/8W
Carbon
3.9k 3.0W
M-Ox.
330 1/8W
Carbon
330 1/8W
Carbon
3.9k 3.0W
M-Ox.
5.6k 1W
M-Ox.
22 1/2W
Carbon
3.3 7.0W
M-Ox.
0.33 1W
Metal Film
2.7 1W
Metal Film
3.3k 2W
M-Ox.
1.0k 1/8W
Carbon
3.3 1W
Metal Film
220k 1/2W
Carbon
390 1/16W M-Ox.
1.5k 1/16W M-Ox.
4.7k 1/8W
Carbon
4.7 1/8W
Carbon
27 1/2W
M-Ox.
10k 1/8W
Metal Film
8.2k 1/8W
Metal Film
180k 1/8W
Carbon
100k 1/16W M-Ox.
1.0k 1/2W
M-Ox.
3.9M 1/2W
Solid
1.2 7.0W
Cement
150k 1/2W
Carbon
0.22 2W
Metal Film
0.27 2W
Metal Film
680 1/2W
M-Ox.
1.0 1/4W
Metal Film
33 1/2W
Carbon
2.4k 1/8W
Carbon
15k 2W
M-Ox.
0.39 2W
Metal Film
3.3k 1/2W
M-Ox.
820 1/2W
M-Ox.
270 1/8W
Carbon
4.7 3.0W
Metal Film
(25L-S100/180, CL25S18)
12 2W
M-Ox.
(25L-M100/180, CL25M10)
120k 1/2W
Carbon
0.56 2W
Metal Film
47k 1/8W
Carbon
3.3k 1/8W
Carbon
3.3k 1/16W M-Ox.
2.2k 1/16W M-Ox.
2.2k 1/16W M-Ox.
2.2k 1/16W M-Ox.
33k 1/16W M-Ox.
1.5k 1/16W M-Ox.
1.0k 1/8W
Carbon
330 1/8W
Carbon
(25L-S180, CL25S18)
1.0k 1/8W
Carbon
(25L-S180, CL25S18)
68k 1/16W M-Ox.
(25L-S180, CL25S18)
22k 1/16W M-Ox.
(25L-S180, CL25S18)
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AA
AB
AA
AA
AD
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AE
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
Part No.
R906
VRS-CY1JF392J
R907
VRS-CY1JF182J
R908
VRS-CY1JF102J
R910
VRD-MN2BE102J
R911
VRS-CY1JF683J
R912
VRS-CY1JF223J
R913
VRS-CY1JF392J
R914
VRS-CY1JF182J
R915
VRS-CY1JF102J
R922
VRS-CY1JF102J
R923
VRS-CY1JF102J
R924
VRD-MN2BE750J
R925
VRD-MN2BE104J
R926
VRD-MN2BE104J
R951
VRD-RA2BE101J
R952
VRD-MN2BE102J
R961
R962
R2001
R2002
R2004
R2006
R2007
VRD-RA2BE101J
VRD-RA2BE101J
VRD-RA2BE562J
VRD-MN2BE103J
VRD-MN2BE101J
VRS-CY1JF103J
VRS-CY1JF223J
R2008
R2009
R2010
R2011
VRD-MN2BE224J
VRD-RA2BE102J
VRD-MN2BE102J
RH-EX0611GEZZ
R2011 VRD-RA2BE561J
R2012 VRS-CY1JF471J
R2012 VRS-CY1JF561J
R2020
R2024
R2025
R2026
R2027
R2028
R2029
R2030
R2032
R2035
R2040
R2041
R2042
R2043
R2044
R2045
R2046
R2047
R2048
R2060
R2061
R2062
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
45
VRS-CY1JF223J
VRD-RA2BE682J
VRD-RA2BE682J
VRD-RA2BE682J
VRD-MN2BE682J
VRD-MN2BE102J
VRS-CY1JF103J
VRS-CY1JF103J
VRD-RA2BE103J
VRD-MN2BE223J
VRD-MN2BE102J
VRD-MN2BE333J
VRD-MN2BE101J
VRS-CY1JF333J
VRD-MN2BE682J
VRD-MN2BE101J
VRD-RA2BE101J
VRS-CY1JF221J
VRS-CY1JF562J
VRD-MN2BE221J
VRD-MN2BE562J
VRD-MN2BE183J
★
Description
J 3.9k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.8k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.0k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.0k 1/8W
Carbon
(25L-S180, CL25S18)
J 68k 1/16W M-Ox.
(25L-S180, CL25S18)
J 22k 1/16W M-Ox.
(25L-S180, CL25S18)
J 3.9k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.8k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.0k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.0k 1/16W M-Ox.
(25L-S180, CL25S18)
J 1.0k 1/16W M-Ox.
(25L-S180, CL25S18)
J 75 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100 1/8W
Carbon
(25L-S100/180, CL25S18)
J 1.0k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100 1/8W
Carbon
J 100 1/8W
Carbon
J 5.6k 1/8W
Carbon
J 10k 1/8W
Carbon
J 100 1/8W
Carbon
J 10k 1/16W M-Ox.
J 22k 1/16W M-Ox.
(25L-M100, CL25M10)
J 220k 1/8W
Carbon
J 1.0k 1/8W
Carbon
J 1.0k 1/8W
Carbon
J Zener Diode, 5.1V
(25L-M180, 25L-S100/180,
CL25S18)
J 560 1/8W
Carbon
(25L-M100, CL25M10)
J 470 1/16W M-Ox.
(25L-M180, 25L-S100/180,
CL25S18)
J 560 1/16W M-Ox.
(25L-M100, CL25M10)
J 22k 1/16W M-Ox.
J 6.8k 1/8W
Carbon
J 6.8k 1/8W
Carbon
J 6.8k 1/8W
Carbon
J 6.8k 1/8W
Carbon
J 1.0k 1/8W
Carbon
J 10k 1/16W M-Ox.
J 10k 1/16W M-Ox.
J 10k 1/8W
Carbon
J 22k 1/8W
Carbon
J 1.0k 1/8W
Carbon
J 33k 1/8W
Carbon
J 100 1/8W
Carbon
J 33k 1/16W M-Ox.
J 6.8k 1/8W
Carbon
J 100 1/8W
Carbon
J 100 1/8W
Carbon
J 220 1/16W M-Ox.
J 5.6k 1/16W M-Ox.
J 220 1/8W
Carbon
J 5.6k 1/8W
Carbon
J 18k 1/8W
Carbon
Code
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AB
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
★
Part No.
PWB-A:
PWB-A:
PWB-A:
PWB-A:
Code
Ref. No.
DUNTK9806WEK0 (25L-M100/CL25M10)
DUNTK9806WEK1 (25L-M180)
DUNTK9806WEK2 (25L-S100)
DUNTK9806WEK3 (25L-S180/CL25S18)
MAIN UNIT (Continued)
R2063 VRD-MN2BE222J
R2064 VRD-RA2BE332J
R2066 VRS-CY1JF103J
R2067
R2068
R2070
R2071
VRS-CY1JF103J
VRS-CY1JF103J
VRS-CY1JF103J
VRD-RA2BE102J
R2101
R2102
R2201
R2202
R2203
R2211
R2212
R2213
R2401
R2402
R2403
R2404
R2501
R2503
R2504
R2505
R2506
R2507
R2508
R2509
R2601
R3001
VRS-CY1JF101J
VRS-CY1JF101J
VRD-MN2BE222J
VRS-CY1JF103J
VRS-CY1JF184J
VRD-MN2BE222J
VRS-CY1JF682J
VRS-CY1JF333J
VRS-CY1JF101J
VRS-CY1JF101J
VRD-MN2BE101J
VRD-MN2BE101J
VRD-MN2BE103J
VRD-MN2BE273J
VRD-MN2BE123J
VRD-MN2BE563J
VRD-MN2BE563J
VRD-MN2BE823J
VRD-MN2BE153J
VRD-MN2BE272J
VRD-RA2BE331J
VRD-RA2BE101J
R3002 VRD-RA2BE101J
R3003 VRS-CY1JF105J
R3004 VRS-CY1JF104J
R3005 VRS-CY1JF623J
R3007 VRS-CY1JF332J
R3008 VRS-CY1JF302J
R3010 VRS-CY1JF392J
R3011 VRD-MN2BE102J
R3012 VRS-CY1JF102J
R3013 VRD-MN2BE104J
R3014
R3015
R3016
R3017
Description
VRD-MN2BE104J
VRD-RA2BE101J
VRD-MN2BE750J
VRD-RA2BE102J
R3018 VRD-RA2BE102J
J 2.2k 1/8W
Carbon
J 3.3k 1/8W
Carbon
J 10k 1/16W M-Ox.
(25L-M100/180, CL25M10)
J 10k 1/16W M-Ox.
J 10k 1/16W M-Ox.
J 10k 1/16W M-Ox.
J 1.0k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100 1/16W M-Ox.
J 100 1/16W M-Ox.
J 2.2k 1/8W
Carbon
J 10k 1/16W M-Ox.
J 180k 1/16W M-Ox.
J 2.2k 1/8W
Carbon
J 6.8k 1/16W M-Ox.
J 33k 1/16W M-Ox.
J 100 1/16W M-Ox.
J 100 1/16W M-Ox.
J 100 1/8W
Carbon
J 100 1/8W
Carbon
J 10k 1/8W
Carbon
J 27k 1/8W
Carbon
J 12k 1/8W
Carbon
J 56k 1/8W
Carbon
J 56k 1/8W
Carbon
J 82k 1/8W
Carbon
J 15k 1/8W
Carbon
J 2.7k 1/8W
Carbon
J 330 1/8W
Carbon
J 100 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100 1/8W
Carbon
(25L-S100/180, CL25S18)
J 1.0M 1/16W M-Ox.
(25L-S100/180, CL25S18)
J 100k 1/16W M-Ox.
(25L-S100/180, CL25S18)
J 62k 1/16W M-Ox.
(25L-S100/180, CL25S18)
J 3.3k 1/16W M-Ox.
(25L-S100/180, CL25S18)
J 3.0k 1/16W M-Ox.
(25L-S100/180, CL25S18)
J 3.9k 1/16W M-Ox.
(25L-S100/180, CL25S18)
J 1.0k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 1.0k 1/16W M-Ox.
J 100k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 100k 1/8W
Carbon
J 100 1/8W
Carbon
J 75 1/8W
Carbon
J 1.0k 1/8W
Carbon
(25L-S100/180, CL25S18)
J 1.0k 1/8W
Carbon
(25L-S100/180, CL25S18)
å
AA
AA
AA
AA
AA
AA
AA
QSW-K0079GEZZ
QSW-K0079GEZZ
QSW-K0079GEZZ
QSW-K0079GEZZ
QSW-K0079GEZZ
J
J
J
J
J
Power
VOL-Down
VOL-Up
CH-Down
CH-Up
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AA
RY701 RRLYJ0081CEZZ
J Relay
P351
QPLGN0461CEZZ J
LX-BZ3049GEFD
LX-HZ3007MEFD
AA
AB
AB
AB
AB
AB
MISCELLANEOUS PARTS
å
FB601
FB702
FB704
FB706
FH701
FH702
P351
QPLGN0160FJZZ
QPLGN0461CEZZ
QPLGN0361CEZZ
QPLGN0207CEZZ
QPLGN0269GEZZ
QPLGN0561CEZZ
QPLGN0561CEZZ
QPLGN0561CEZZ
RMC2601 RRMCU0235CEZZ
HM501 LX-GZ3001PEZZ
HM601 LX-GZ3001PEZZ
HM602 LX-GZ3001PEZZ
HM603 LX-GZ3001PEZZ
HM604 LX-GZ3001PEZZ
HM605 LX-GZ3001PEZZ
HM606 LX-GZ3002PEZZ
HM607 LX-GZ3002PEZZ
HM608 LX-GZ3001PEZZ
HM609 LX-GZ3001PEZZ
HM610 LX-GZ3002PEZZ
HM611 LX-GZ3002PEZZ
HM612 LX-GZ3001PEZZ
HM613 LX-GZ3002PEZZ
HM614 LX-GZ3002PEZZ
HM615 LX-GZ3002PEZZ
HM616 LX-GZ3002PEZZ
HM617 LX-GZ3001PEZZ
HM618 LX-GZ3001PEZZ
HM701 LX-GZ3001PEZZ
HM702 LX-GZ3001PEZZ
HM703 LX-GZ3001PEZZ
HM704 LX-GZ3001PEZZ
HM705 LX-GZ3001PEZZ
HM706 LX-GZ3001PEZZ
HM707 LX-GZ3001PEZZ
HM708 LX-GZ3001PEZZ
HM709 LX-GZ3001PEZZ
HM710 LX-GZ3001PEZZ
HM711 LX-GZ3001PEZZ
HM712 LX-GZ3001PEZZ
HM713 LX-GZ3001PEZZ
RDA501 PRDAR0234PEFW
RDA604 PRDAR0233PEFW
RDA701 PRDAR1008MEFW
RDA751 PRDAR5072CEFW
TAN921 QTANJ0323CEZZ
TAN921 QTANJ0523CEZZ
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AL
46
★
QFS-B4023CEZZ
or
QFS-B4021GEZZ
RBLN-0047CEZZ
RBLN-0036CEZZ
RBLN-0037CEZZ
RBLN-0037CEZZ
QFSHD1013CEZZ
QFSHD1014CEZZ
QPLGN0361CEZZ
P601
P621
P651
P701
P703
P901
P903
P2401
SWITCHES
S2501
S2502
S2503
S2504
S2505
F701
Part No.
Description
Code
J Fuse 4A 125V
AC
J
J
J
J
J
J
J
AB
AB
AB
AB
AC
AC
AB
J
J
J
J
J
J
J
J
J
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
M
J
J
M
J
M
Ferrite Bead
Ferrite Bead
Ferrite Bead
Ferrite Bead
Fuse Holder
Fuse Holder
Plug 3-pin (S)
(25L-M100/180, CL25M10)
Plug 4-pin (K)
(25L-S100/180, CL25S18)
Plug 5-pin (K)
Plug 4-pin (YBN)
Plug 3-pin
Plug 2-pin (M)
Plug 2-pin (P)
Plug 5-pin (HA)
Plug 5-pin (GBN)
Plug 5-pin
R/C Receiver
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Heat Sink IC501
Heat Sink Q602
Heat Sink IC701
Heat Sink IC751
AV Terminal (25L-S100)
AV Terminal
(25L-S180, CL25S18)
Screw
Screw
AB
AD
AB
AB
AA
AB
AB
AB
AB
AK
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AH
AK
AH
AC
AL
AG
AA
AA
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
★
Part No.
Description
Code
Ref. No.
CRT UNIT
TRANSISTORS
VS2SC3198-Y-1
VS2SC3789//2E
VS2SC3198-Y-1
VS2SC3789//2E
VS2SC3198-Y-1
VS2SC3789//2E
VS2SA1266-Y-1
J
M
J
M
J
M
J
VHD1SS119//-1
VHD1SS119//-1
VHD1SS119//-1
L851
VP-MK820K0000
AA
AA
AA
AA
AA
AA
AA
J Diode
J Diode
J Diode
J1001 QJAKE0053GEZZ
J1002 QJAKE0055GEZZ
J Jack, Video in
J Jack, Audio in (L)
(25L-S100/180, CL25S18)
J1003 QJAKE0055GEZZ J Jack, Audio in
(25L-M100/180, CL25M10)
J1003 QJAKE0059GEZZ J Jack, Audin in (R)
(25L-M100/180, CL25M10)
P1001 QPLGN0541CEZZ J Plug, 5-pin (HA)
AB
AB
AB
COIL
J Peaking 82µH
AB
CAPACITORS
C851
C852
C853
C854
C883
[EL.··· Electrolytic]
VCCSPA1HL391J J 390p 50V
VCCSPA1HL331J J 330p 50V
VCCSPA1HL391J J 390p 50V
RC-KZ0024CEZZ J 0.001 2kV
VCEA0A1HW106M J 10
50V
R851
R852
R853
R855
R856
å R857
R858
R859
R860
R861
R863
R864
å R865
R866
R867
R868
R869
R871
R872
å R873
R874
R881
R882
R883
R884
R895
[M-Ox.··· Metal Oxide.]
VRD-RA2BE470J J 47 1/8W
VRD-RA2BE181J J 180 1/8W
VRD-RA2BE121J J 120 1/8W
VRD-RA2BE471J J 470 1/8W
VRD-RA2BE221J J 220 1/8W
VRS-VV3LB123J
J 12k 3.0W
VRD-RM2HD222J J 2.2k 1/2W
VRD-RA2BE470J J 47 1/8W
VRD-RA2BE181J J 180 1/8W
VRD-RA2BE121J J 120 1/8W
VRD-RA2BE471J J 470 1/8W
VRD-RA2BE221J J 220 1/8W
VRS-VV3LB123J
J 12k 3.0W
VRD-RM2HD222J J 2.2k 1/2W
VRD-RA2BE470J J 47 1/8W
VRD-RA2BE181J J 180 1/8W
VRD-RA2BE121J J 120 1/8W
VRD-RA2BE471J J 470 1/8W
VRD-RA2BE221J J 220 1/8W
VRS-VV3LB123J
J 12k 3.0W
VRD-RM2HD222J J 2.2k 1/2W
VRD-RA2BE102J J 1.0k 1/8W
VRD-RA2BE331J J 330 1/8W
VRD-RA2BE561J J 560 1/8W
VRD-RA2BE152J J 1.5k 1/8W
VRD-RA2BE470J J 47 1/8W
Description
Code
MISCELLANEOUS PARTS
2SC3198
2SC3789
2SC3198
2SC3789
2SC3198
2SC3789
2SA1266
DIODES
D881
D882
D884
★
PWB-H: DUNTK9310WEK0 (25L-M100/180, CL25M10)
PWB-H: DUNTK9310WEK1 (25L-S100/180, CL25S18)
FRONT AV UNIT
PWB: DUNTK9510WEK1
Q851
Q852
Q853
Q854
Q855
Q856
Q881
Part No.
Ceramic
Ceramic
Ceramic
Ceramic
EL.
AA
AA
AA
AC
AB
Carbon
Carbon
Carbon
Carbon
Carbon
M-Ox.
Carbon
Carbon
Carbon
Carbon
Carbon
Carbon
M-Ox.
Carbon
Carbon
Carbon
Carbon
Carbon
Carbon
M-Ox.
Carbon
Carbon
Carbon
Carbon
Carbon
Carbon
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
RESISTORS
MISCELLANEOUS PARTS
P851 QPLGN0541CEZZ J Plug, 5-pin(GBN)
P852 QPLGN0441CEZZ J Plug, 4-pin(YBN)
SC851 QSOCV0937CEZZ M CRT Socket
AB
AB
AF
47
AD
AD
AD
AC
AB
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
Part No.
★
Description
Code
Ref. No.
MISCELLANEOUS PARTS
å ACC701
å ACC701
SP1
SP2
QACCD3070CESA M AC Cord
(25L-M100/180, CL25M10)
QACCD3065CESA M AC Cord
(25L-S100/180, CL25S18)
QCNW-0133MEZZ M Connecting Cord
(25L-M100/180, CL25M10)
QCNW-0135MEZZ M Connecting Cord
(25L-M100/180, CL25M10)
QCNW-0130MEZZ M Connecting Cord
(25L-S100/180, CL25S18)
QCNW-0134MEZ M Connecting Cord
(25L-S100/180, CL25S18)
QCNW-0166MEZZ M Connecting Cord
QCNW-0167MEZZ M Connecting Cord
VSP0080PBL4YS M Speaker, 32 ohm
VSP0080PBL4YS M Speaker, 32 ohm
(25L-S100/180, CL25S18)
M Registration Card
(U.S.A. only)
TiNS-6548MEZZ
M Operation Manual
(25L-M100, CL25M10)
TiNS-6549MEZZ
M Operation Manual
(25L-M180)
TiNS-6550MEZZ
M Operation Manual
(25L-S100)
TiNS-6551MEZZ
M Operation Manual
(25L-S180, CL25S18)
RRMCG1324CESA M Infrared R/C Unit
(25L-M100, CL25M10,
25L-S100)
RRMCG1395CESA M Infrared R/C Unit
(25L-M180, 25L-S180,
CL25S18)
AH
SPAKC0635MEZZ
SPAKX0162MEZZ
SPAKX0170MEZZ
SSAKA0004MEZZ
– Packing Case
(25L-M100/180, CL25M10)
– Packing Case
(25L-S100/180, CL25S18)
– Buffer Material
(25L-M100/180, CL25M10)
– Buffer Material
(25L-S100/180, CL25S18)
– Polyethylene Foam Sheet
Code
25L-M100/180, CL25M10
1
AG
1
AC
1-1
1-2
1-3
1-4
1-5
2
AF
AF
AE
AD
AC
AG
AG
CCABA1277MES1 M Front Cabinet Ass'y
(25L-M100, CL25M10)
CCABA1297MES1 M Front Cabinet Ass'y
(25L-M180)
Not Available
– Front Cabinet
HBDGB1008MESA M Badge, "SHARP"
JBTN-1086MEKA M Button, Power, Vol-up/down
JBTN-1087MEKA M Button, CH-up/down
GCOVA1028MEKA M Cover for R/C
GCABB1145MEKA M Rear Cabinet
BE
BE
—
AA
AD
AD
AD
AZ
25L-S100/180, CL25S18
1
1
1-1
1-2
1-3
1-4
1-5
2
2
CCABA1298MES1 M Front Cabinet Ass'y
(25L-S100)
CCABA1299MES1 M Front Cabinet Ass'y
(25L-S180, CL25S18)
Not Available
– Front Cabinet
HBDGB3009MESA M Badge, "SHARP"
JBTN-1103MEKA M Button, Power, Vol-up/down
JBTN-1104MEKA M Button, CH-up/down
GCOVA1038MEKA M Cover for R/C
GCABB1146MEKA M Rear Cabinet (25L-S100)
GCABB1147MEKA M Rear Cabinet
(25L-S180, CL25S18)
BE
BE
—
AC
AE
AE
AC
AZ
AA
AP
CABINET PARTS LOCATION
AD
AD
1 1-1
AD
2
AT
AW
PACKING PARTS
(NOT REPLACEMENT ITEM)
SPAKC0634MEZZ
Description
CABINET PARTS
SUPPLIED ACCESORRIES
TGAN-1006MEZZ
★
Part No.
25L-M100/180
CL25M10
1-3 1-2
1-5
1-4
1 1-1
—
2
—
—
—
25L-S100/180
CL25S18
48
1-3 1-2
1-5
1-4
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
Part No.
★
Description
Code
No.
Part No.
PACKING
OFRef.
THE
SET
★
Description
Code
★ Polyethylene Bag
Operation Manual
Registration Card (U.S.A.)
Infrared R/C Unit
★ Batteries
★ Polyethylene Foam Sheet
★ Buffer Material
FRONT
★ Packing Case
Use tapes to
fix the packing case.
★ Bar Code Label
REAR
MARK ★ : Not replacement items.
49
25L-M100/180/S100/180
CL25M10,CL25S18
Ref. No.
Part No.
★
Description
Code
Ref. No.
★
Part No.
Description
Code
COPYRIGHT © 1999 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.
SHARP CORPORATION
AV Systems Group
Quality & Reliability Control Center
Yaita, Tochigi 329-2193, Japan
TQ0633-S
Apr. 1999 Printed in Japan
SY. KG
50
">