Yamaha MG 10 Manuel utilisateur

MG10
COMMERCIAL AUDIO - ANALOG MIXERS
Console de mixage 10 canaux - 4 entrées micro, 10 entrées ligne (4 mono + 3 stéréo), 1 bus
stéréo, 1 Aux
• Console de mixage 10 canaux
• 4 entrées micro, 10 entrées ligne (4 mono + 3 stéréo)
• 1 bus stéréo
• 1 Aux
• Préamplis micro D-PRE avec circuit Darlington inversé
• Compresseurs 1-Knob
• Atténuateur PAD sur les entrées mono
• Alimentation fantôme +48V
• Sorties symétriques XLR
• Châssis métallique
• Dimensions (LxHxP): 244 mm x 71 mm x 294 mm
• Poids net: 1.9 kg
1
MG10
COMMERCIAL AUDIO - ANALOG MIXERS
Spécifications
General specifications
Total harmonic distortion
Hum & noise level
Equivalent input noise
Residual output noise
Crosstalk
Power requirements
Dimensions
Net weight
Accessories
Frequency response
Power consumption
Others
2
W
H
D
0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003
% @ +24dBu (1kHz), GAIN knob: Min
-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
-83 dB
PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or
equivalent recommended by Yamaha
244 mm (9.6")
71 mm (2.8")
294 mm (11.6")
1.9 kg (4.19 lbs.)
Included Accessory: AC Adaptor, Owner’s Manual,
Technical Specifications, Optional Accessory: Mic Stand
Adaptor BMS-10A
+0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal
output level @ 1 kHz, GAIN knob: Min
22.9 W
Operating Temperature: 0 to +40˚C
MG10
COMMERCIAL AUDIO - ANALOG MIXERS
Spécifications
Outline
I/O
Bus
Input Channel Function
Phantom power
PAD
HPF
COMP
EQ HIGH
EQ MID
EQ LOW
PEAK LED
Input Channels
Output Channels
Level Meter
Mono[MIC/LINE]
Stereo[LINE]
STEREO OUT
MONITOR OUT
PHONES
AUX SEND
+48 V
Stereo: 1, AUX[FX]: 1
26 dB (Mono)
80 Hz, 12 dB/oct (Mono)
1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1
to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25
msec, Release time: approx. 300 msec
Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
LED turns on when post EQ signal reaches 3 dB below
clipping
2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
4
3
2
1
1
1
3
">