Samsung WD80J5430AW/EF Lavante-séchante, 8+6kg - WD80J5430AW Manuel utilisateur

PDF
Document
WD80J5*****, WD80J5430AW : Chat IA et PDF | Fixfr
/

User questions

T Z

John T.

How to resolve drainage issues or error code 5C when hoses are clear?

Disconnect the power supply and drain any residual water using the emergency drain hose. Clean the pump filter with a soft brush and verify that the pump impeller is not obstructed by foreign objects. Ensure the drain hose is not kinked, frozen, or incorrectly positioned.

T Z

John T.

How to resolve error code 5C or drainage issues when the pump makes noise but water is not evacuated?

Disconnect the device from the power supply and drain any residual water using the emergency drain hose. Open the filter cover to clean the pump filter and ensure the pump propeller is not obstructed by foreign objects. Additionally, verify that the drain hose is not kinked, frozen, or clogged, and is correctly positioned in the drainage system.

T Z

John T.

How to resolve drainage issues or error code 5C?

Disconnect the power supply and drain the residual water using the emergency drain hose. Remove and clean the pump filter, ensuring the impeller is not obstructed by foreign objects. Additionally, check the drain hose for kinks, ice, or blockages, and verify that it is correctly positioned in the drainage system.

T Z

John T.

How to resolve a '5C' error code or a noisy drain pump that fails to drain water?

Turn off and unplug the washing machine. Drain residual water using the emergency drain hose. Open the filter cover and clean the pump filter with a soft brush, ensuring the pump impeller is not blocked by foreign objects. Verify that the drain hose is not kinked, frozen, or obstructed, and ensure it is correctly positioned in the drainage system.

T Z

John T.

How to resolve washing machine drainage issues, such as error code 5C or the pump making noise without draining?

Check and clean the pump filter after draining residual water through the emergency drain hose. Ensure the pump propeller inside the filter housing is not obstructed by foreign objects. Additionally, verify that the drain hose is not kinked, frozen, or improperly positioned.

T Z

John T.

How to resolve drainage issues or Error Code 5C on a washing machine?

Disconnect the power supply and drain any residual water using the emergency drain hose. Open the pump filter cover, clean the filter with a soft brush, and verify that the pump impeller is not obstructed by foreign objects. Ensure the drain hose is correctly positioned, not kinked, and not frozen.

T Z

John T.

How to resolve error code 5C or drainage issues when the pump is audible but not draining?

Disconnect the power supply and drain the residual water using the emergency drain hose. Open the filter cover to clean the pump filter and ensure the internal propeller is not blocked by foreign objects. Verify that the drain hose is correctly positioned and not kinked, frozen, or obstructed.

C A

Robert C.

How to calibrate the washing machine?

Simultaneously press and hold the Temp. and Delay End buttons for 3 seconds to enter the calibration mode.

C A

Robert C.

How to interrupt or stop a wash program?

Press the Start/Pause button to pause or stop the program currently in progress.

C A

Robert C.

How to reset the washing machine?

The manual does not describe a global reset or factory reset procedure. The following actions are suggested to resolve specific issues:

  • To interrupt or stop a program: Press the Start/Pause button.
  • To restart after an error: Correct the cause of the problem (e.g., check water inlet, clean filter) then turn the appliance off and on again or restart the program.
  • For calibration: Press and hold Temp. and Delayed End simultaneously for 3 seconds to enter calibration mode.
C A

Robert C.

How to reset or calibrate the washing machine?

There is no global factory reset procedure. To interrupt a program, use the Start/Pause button. To restart after an error, turn the appliance off and back on. To calibrate the device, press and hold the Temperature and Delay End buttons simultaneously for 3 seconds.

Preparing document for printing…
0%