Delock Module M.2 NGFF 3042 B+M > 4 x SATA 6 Gb/s 7 pin
female
Description
This M.2 NGFF module by Delock expands a system by
four internal SATA 6 Gb/s interfaces.
Spécifications techniques
• Connector:
59 pin M.2 NGFF key B+M male >
4 x SATA 6 Gb/s 7 pin female
• Interface: PCIe 2.0
• Form factor: M.2 NGFF 3042
• Chipset: Marvell 88SE9215
• Data transfer rate up to 6 Gb/s
• Maximum power consumption: 2.74 W (3.3 V x 830 mA)
• Vibration: 5 G @ 7 ~ 2000 Hz
• Shock: 50 G @ 0.5 ms
• Storage temperature: -55 °C ~ +95 °C
• Operation temperature: 0 °C ~ +70 °C
• Weight: 7.5 g
• Dimensions (LxWxH): ca. 42 x 30 x 11 mm
• OS independent, no driver installation necessary
Configuration système requise
• A free M.2 NGFF key B, key M or key B+M slot with 42 mm up to 110 mm length
and 30 mm width based on PCIe
Contenu de l’emballage
• M.2 module
Image
N° produit 54668
EAN: 4043619546688
Pays d´origine: China
Emballage: • Antistatic cover
General
Facteur de forme :
M.2 2242
Supported operating system:
Indépendant du système d’exploitation, pas besoin d’installer un pilote
Storage temperature range:
-55 °C ~ 95 °C
Interface
connecteur :
M.2 NGFF based on SATA
Connecteur 1:
4 x SATA 6 Gb/s à 7 broches femelle
Technical characteristics
Chipset:
Marvell 88SE9215
Débit de données:
6 Gb/s
Température de fonctionnement :
0 °C ~ 70 °C
Shock:
50 G @ 0.5 ms
Current consumption:
830 mA
Vibration:
5 G @ 7 ~ 2000 Hz
Physical characteristics
Powered by TCPDF (www.tcpdf.org)
Weight:
7.5 g
Longueur:
42 mm
Width:
30 mm
Height:
11 mm
">
