Marantec Comfort 257.2 Owner's Manual

To code a new transmitter, use a transfer plug to connect it to a master transmitter; hold the master button and then the new button until the LED stays lit. The operator must be reprogrammed to recognize the new code. Specific button assignments, such as intermediate positions or specific open/close functions, can be configured through Level 4 of the advanced programming. Ensure the door's movement area is clear during operation.

1. Coding: Use a transfer plug between a master and a new remote; hold the master button, then press the new remote button until the LED remains lit. 2. Programming: Reprogram the operator to recognize the new code. 3. Configuration: Assign buttons to specific positions (such as intermediate or open/close) via the Level 4 advanced programming menu.

To code a new transmitter, connect it to a master transmitter using a transfer plug. Hold the button on the master and press the button on the new transmitter until the LED stays lit. After coding, the operator unit must be programmed to recognize the new code. Buttons can be assigned to specific functions, such as intermediate positions, through the advanced programming settings.

Use a transfer plug to connect a master transmitter to the new one. Hold the button on the master and press the button on the new transmitter until the LED stays lit. After coding, the operator must be programmed to recognize the new code.

Specific functions, such as intermediate positions or partial opening/closing, can be assigned to buttons via level 4 of the advanced programming menu.

Use the transfer plug to copy the code from a master remote to the new one by holding the master button and then the new remote button until the LED stays lit. After coding, the operator must be reprogrammed. Specific button assignments for functions like intermediate positions are configured via level 4 of the advanced programming.

To transfer a code, connect the master remote to the new one using the transfer plug, hold the master button, and then press the button on the new remote until the LED stays lit. After coding, the operator must be programmed to recognize the new code. Buttons can be specifically assigned to functions like intermediate positions or open/close commands through the advanced programming levels.

To transfer a code, use the transfer plug to connect a master transmitter to a new one; hold the master button then the new transmitter button until the LED remains lit. After coding, the operator must be reprogrammed to recognize the new code. Buttons can also be assigned to specific positions, such as intermediate or open/close, via the advanced programming menu.