Faure FWF10120PS Lave-linge Manuel utilisateur

To drain the water, press Start/Pause after the program finishes or select the 'No Spin' option using the Spin button. In an emergency, unplug the appliance and lower the drain hose into a container to allow the water to flow out. The device also performs an automatic drain after approximately 18 hours if water remains in the drum.

To drain water from your washing machine, you have several methods depending on your situation:

• If the program is finished but water remains in the drum: Press the Start/Pause button to start a drain, or use the Spin button to change the speed then press Start/Pause. If you select the "No spin" option, the appliance will only perform draining.
• In case of emergency (or as a precaution against freezing): You must unplug the appliance, remove the drain hose from its support, place its end in a container to let the water flow out, then start a "Drain & Spin" program.
• Note: The appliance performs an automatic drain after approximately 18 hours (except for the Wool program) if water remains in the tub at the end of a cycle.

To drain the water, press the Start/Pause button after the cycle ends, or use the Spin button to adjust the speed and then press Start/Pause. Selecting the 'No Spin' option will perform a drain only. For emergency drainage or frost prevention, unplug the device, remove the drain hose from its support, place the end in a container to let the water flow out, and then run a 'Drain & Spin' program. The device automatically drains after approximately 18 hours if water remains in the drum, except for the Wool program.

There are three primary methods to drain the water: 1. Press the Start/Pause button at the end of a cycle, or use the Spin button to select the 'No Spin' option and then press Start/Pause. 2. In emergencies or to prevent freezing, unplug the appliance and manually drain the water by placing the end of the drain hose into a container. 3. The device will automatically perform a drain after approximately 18 hours if water remains in the drum at the end of a cycle (except for the Wool program).

Several methods are available to drain water from your washing machine: If the program is finished but water remains, press the Start/Pause button, or use the Spin button to change the speed then press Start/Pause. If the "No spin" option is selected, the appliance will only drain. In case of emergency or as a precaution against frost, unplug the appliance, remove the drain hose, place its end in a container to let the water flow, then launch a "Drain & Spin" program. The appliance automatically drains after about 18 hours (except for the Wool program) if water remains in the drum at the end of a cycle.

To drain the water, press the Start/Pause button, or select a spin speed (choosing 'No Spin' will only drain). In an emergency, disconnect the drain hose from its support and place its end in a container to allow the water to flow out.