SWR-1042D - Type-R Car Subwoofer Driver | SWR--1242 | SWR-1022D - Type-R Car Subwoofer Driver | SWR-1522D | SWR 1242D - Type-R Car Subwoofer Driver | Alpine SWR-1222D - Type-R Car Subwoofer Driver Manuel utilisateur

YA ml E
TYPE-R SUBWOOFER
HAUT-PARLEUR D'EXTRÉMES GRAVES TYPE-R
APPLICATION GUIDE
GUIDE D' APPLICATION
SWR-1542D
15 Inch Dual Voice Coil Subwoofer (4 (2)+(4 (2)
Haut-parleur d'extrêmes graves à double bobine 15 po (42)+(40)
SWR-1522D
15 Inch Dual Voice Coil Subwoofer (20 )+(20)
Haut-parleur d'extrêmes graves a double bobine 15 po (22)+(2Q2)
SWR-1242D
12 Inch Dual Voice Coil Subwoofer (4 (2)+(4 (2)
Haut-parleur d'extrêmes graves à double bobine 12 po (42)+(40)
SWR-1222D
12 Inch Dual Voice Coil Subwoofer (20 )+(20)
Haut-parleur d'extrêmes graves à double bobine 12 po (22 )+(202)
SWR-1042D
10 Inch Dual Voice Coil Subwoofer (4 (2)+(4 (2)
Haut-parleur d'extrémes graves a double bobine 10 po (4(2)+(40)
SWR-1022D
10 Inch Dual Voice Coil Subwoofer (2 (2)+(2 (2)
Haut-parleur d'extrêmes graves à double bobine 10 po (22)+(20)
ANLPINE A een NEO CNA Epa 000 )
74 Example 1 One Amplifier and One Subwoofer Example 2 One Amplifier and One Subwoofer
Exemple 1 1 amplificateur et 1 h.-p. d'extrêmes graves Exemple 2 1 amplificateur et 1 h.-p. d'extrêmes graves
JUMPER / CAVALIER JUMPER / CAVALIER
ZENER
Wa 20
8Q
О a,
О
[nee
°
ФО
| (ame)
Example 3 Two Amplifiers and One Subwoofer Example [< One Amplifier and Two Subwoofers
Exemple 3 2 amplificateurs et 1 h.-p. d'extrémes graves Exemple 4 1 amplificateur et 2 h.-p. d'extrémes graves
JUMPER / CAVALIER JUMPER / CAVALIER
40
©
VB — ——
== — DA ! or
ge = Be | [пене |
ОИ и) —
© =
Example 5 One Amplifier and Three Subwoofers
Exemple 5 1 amplificateur et 3 h.-p. d'extrêmes graves
JUMPER / CAVALIER JUMPER / CAVALIER JUMPER / CAVALIER
М7 © 2.60 aaa |
em re re re. — | С —— IL JE
©) ——— N€ |
Example 6 one Amplifier and Four Subwoofers
Exemple E amplificateur et 4 h.-p. d'extrêmes graves
JUMPER / CAVALIER JUMPER / CAVALIER JUMPER / CAVALIER JUMPER / CAVALIER
= | WR ied = SWR-100D | SWR-touD SWR AD
== / 1-0 0% Г @“О О“ 1 90 O 0-0 0*E—
w, 20 NN 7 a DZ |) I 7 —— 1
— 90 —— fet) (| aras) | Cea) | [mrs]
© ‹ 1 |
TYPE-R WIRING WORKSHEET
CABLAGE POUR TYPE-R
SWA-1022D/ SWR-1222D/ SWAR-1522D
AM/.PINE A DUAL 20 TYPE-R APPLICATION DIAGRAMS
SCHEMAS D'APPLICATION - TYPE-R, DOUBLE BOBINE, 262
Example 2 One Amplifier and One Subwoofer
Exemple 2 1 amplificateur et 1 h.-p. d'extrêmes graves
JUMPER / CAVALIER
Example 1 one Amplifier and One Subwoofer
Exemple 1 1 amplificateur et 1 h.-p. d'extrémes graves
JUMPER / CAVALIER
7 10
anual for 1Q connection.
MLEDE — Caution ! Consult amplifier owner's m
Attention : lire le manuel de l'amplificateur pour la connexion à 12 .
Example 4 one Amplifier and Two Subwoofers
Exemple 4 1 amplificateur et 2 h.-p. d'extrémes graves
JUMPER / CAVALIER
Example 3 Two Amplifiers and Two Subwoofers
JUMPER / CAVALIER
Exemple 3 2 amplificateurs et 2 h.-p. d'extrémes graves
JUMPER / CAVALIER
JUMPER / CAVALIER
— ÆAHAPINE
ÆAAPNE | —
Example 5 Eight Amplifiers and Four Subwoofers-Competition Diagram
le 5 8 ampilificateurs et 4 h.-p. d'extrémes graves - schéma de competition
р р 9 p
Exem
fe | © 2 | © 2. | © 2. ;
© al O | © |
| |
I
——[ M4/LENE | —
3 20 (РА
=) +
_ == ) y + (©
==]
O Li
CABLAGE POUR TYPE-R
LZR
. w . w . 20 w | © 2 |. .
O | ®
ФО
=I |
®
ILL]
N
is , Type-R
Subwoofer Features and Specifications de
SWH-1022D SWR-1042D SWR-1222D SWR-1242D SWR-1522D SWR-1542D
Features
Size 10" 10" 12" 12" 15" 15"
Power Handling (RMS/peak) 500W/1500W 500W/1500W 500W/1500W 500W/1500W 750W/2000W 750W/2000W
Power Range (RMS) 200W-500W 200W-500W 200W-500W 200W-500W 400W-750W 400W-750W
Frequency Response 24Hz-600kHz 26Hz-600Hz 23Hz-500Hz 25Hz-500Hz 18Hz-400Hz 20Hz-400Hz
Diaphragm Material Kevlar Reinforced Pulp Fiber
Design 2-piece Structural Parabolic
Surround Material Injection Molded Santoprene®
Design High Amplitude Multi-Roll
Spider Material Nomex®
Design Mirrored Progressive
Voice Coil {Material 180°C High Temp Wire on Spiral Cut Aluminum Former
Design 4-Layer Dual Voice Coil
[Motor Structure Pole Geometry Compound Radius Curve (Patent 46,639,993)
Configuration Radial Vented VC Heat Sink and Airflow Management System (Pat. Pending)
Frame Material Cast Aluminum
Design Perimeter Vented Heat Transfer (Pat. Pending)
Terminals Layout One Side
Design Heavy Duty 8ga. Push with Housing, Banana Plug Jumper
Tinsel Leads Design Reinforced Layer Spider Integration (Patent 46,810,988)
Gasket Design Concealed Mount Gasket System
Enclosure Information
[Mounting Depth 172mm (6.8") | 172mm (6.8") | 195mm (7.77) | 196mm (7.7") | 234 mm (9.27) | 234 mm (9.27)
{Mounting Diameter - Front Mount 231 mm (9.1) | 231 mm (9.1) | 275 mm (10.9”) | 275 mm (10.9%) | 349 mm (13.8") | 349 mm (13.8")
Displacement - Front Mount** 0.050 ft” 0.050 ft* 0.071 0.071 ft” 0.123 ft” 0.123 ft
Added Volume - Reverse Mount (magnet out) ** 0.055 ft 0.055 № 0.085 ft’ 0.085 ft’ 0.160 ft” 0.160 ft”
Recommended Enclosure Alignments Sealed, Vented, Bandpass
Sealed Box Volume Range (Gross) 0.5-0.8 1 0.5-0.8 ft’ 0.7-1.0 ff 0.7-1.0 ff” 1.3251 1.3-25 1
External Box Dimensions 11.8" x 11.5" x 12.75" | 11.5" х 11.8 x 1275" 19° x 19% x 125" 13 x 13" x 12.5" 16.5" х 16.5" х 15" 16.5" х 16.5" х 15"
OEM NE Gross Intemal Volume 0.65 ff” 0.65 ft? 0.85 ft” 0.85 ft” 175 175
Р Net Internal Volume** 0.6 ft” 0.6 ft” 0.78 ft” 0.78 ft” 1.625 №" 1.625 №"
Fz, Qe 49Hz, 0.65 48H7, 0.69 51Hz, 0.67 49Hz, 0.7 43Hz, 0.64 44Hz, 0.65
Vented Box Volume Range (Gross) 0.6-1.25 ft” 0.6-1.25 ft” 0.75-1.75 ft” 0.75-1.75 ft” 1.5-3.0 ft? 1.5-3.0 fi”
External Box Dimensions 12.5" x 145 x 17.25" | 125" x 14.5" x 17.258" || 18" х 13.5" х 16.5" 18° x 13.5" x 16.5" 19.5" х 16.5" х 20" 19.5" x 16.57 x 20"
Gross Internal Volume 131 1.3 ft? 1.7 ft 1.7 ft 2.9 ff 2.9 ft”
Vent Area (dimensions) inf" x 45) 11 inti1" x 1") 15in 012" x 1.25") 15in 12" x 1.25") 20. 5in“(15" x 1.5%) 20 Sin (15 x 1.57)
Optimum Vented Box Vent Length 29 in. 22 in. 22.75 in. 22.75 in. 27 in. 27 in.
Vent Displacement 0.237 ft” 0.237 ft” 0.305 ft 0.305 ft 0.51 it’ 0.51
Net Internal Volume (V.)** 1 ft” 1 ff’ 1.3 ft” 13 2.25 2.25 it”
Fs,fipple, Fu 30 Hz, 2.8 dB, 35 Hz | 30 Hz, 3.5 dB, 96 Hz | 53 Hz, 2dB,56 Hz | 33 Hz, 25 dB, 96 Hz | 27 Hz, 2.7 dB, 30 Hz | 29 Hz, 2.4 dB, 50 Hz
|Electro-Mechanical Parameters* | | |
Nominal Impedance 20420) 40+40 20420) 40+40 20+20 40+40
Frequency Response 24 - 600Hz 26 - 600Hz 23 - 500Hz 25 - 500Hz 18 - 400Hz 20 - 400Hz
Sensitivity (SPL@1W/1m)* 83 dB 83 dB 85 dB 85 dB 87 dB 87 dB
D.C Coil Resistance (Re) 1.850+1.850) З.70+3.70 1.85(2+1.850 3.70+3.70 1.652+1.60 3.4552+3.45()
Inductance (Le) 1kHz/20kHz 2.48mH /1.06mH|3.94mH / 1,63mH|2.35mH / 1.01mH|3.71mH / 1.67mH|2.53mH / 0.99mH|4.17mH / 1.64mH
Free Air Resonance (Fs) 31Hz 33Hz 28Hz 29Hz 22Hz 23Hz
Equivalent Stiffness (Vas) 20L (0.711%) | 20L (0.711) 45L (1.6 ff) 45. (16 ft") | 100L (3.53 ft" | 100L (3.53 ff)
Mechanical Q (Qms) 8.67 7.92 8.25 7.89 8.57 7.71
Electrical Q (Qes) 0.53 0.57 0.44 0.50 0.43 0.48
Total Q (Qts) 0.50 0.53 0.42 0.47 0.41 0.45
Linear Excursion [(Hvc-Hag)/2)], One-Way (Xmax) 18.1 mm 18.2 mm 18.1 mm 18.2 mm 20.7mm 20.5 mm
Magnetic Linear Excursion, One-Way (Xmag) 19.6 mm 19.6 mm 19.4 mm 19.4 mm 21.4 mm 21.5 mm
{Mechanical Excursion, Peak-to-Peak 60 mm 60 mm 65 mm 65 mm 70 mm 70 mm
Gap Height (Hag) 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
Coil Height (Hvc) 46.1 mm 46.4 mm 46.1 mm 46.4 mm 51.3 mm 51.0 mm
Cone Area (Sd) 332 cm” 3320m* 480 cm” 480 cm” 775 ст 775 ст”
Voice Coil Diameter 50 mm (2") 50 mm (2") 50 mm (2) 50 mm (2") 65 mm (2.6") 65 mm (2.6")
|Magnet Weight 85 oz 85 oz 109 oz 109 oz 155 oz 155 oz
Note: All specifications are subject to change without notice
# All T/S parameters measured/calculated with voice coils connected in series, after break-in.
* This commonly misunderstood specification should not be used as a reference for subwoofer output capability.
** Based upon 3/4" (19mm) baffle thickness, with opening cut approximately to gasket inner diameter
Caractéristiques et spécifications Caractéristiques
Type-R
SWR-1022D | SWR-1042D | SWR-1222D | SWR-1242D | SWR-1522D | SWR-1542D
Features
Taille 10" 10" 12" 12" 15" 15"
Puissance admissible (efficace/de créte) 500W/1500W | 500W/1500W 500W/1500W | 500W/1500W 750W/2000W | 750W/2000W
Plage de puissance (efficace) 200W-500W 200W-500W 200W-500W 200W-500W 400W-750W 400W-750W
Réponse en fréquence (Hz) 24Hz-600Hz 26Hz-600Hz 23Hz-500Hz 25Hz-500Hz 18Hz-400Hz 20Hz-400Hz
Membrane Matériau Pâte renforcée de Kevlar
Conception 2 piéces parabolique
Suspension Matériau Santoprene"“ injecté
Conception Multibourrelets à amplitude élevée
Centreur Matériau Nomex"
Conception Centreur double progressif Nomex""”
Bobine Matériau Fil résistant jusqu'à 180°C sur forme d'aluminium à sillon hélicoïdal
Conception 4 couches, double bobine
Moteur Géométrie de pièce polaire Courbe complexe (brevet n° 6,639,993)
Configuration Bobine a dissipateur thermique a ventilation radiale et gestion du flux d'air (brevet en instance)
Bati Matériau Cast Aluminum
Conception Bati a transfert thermique et ventilation périmétrique (brevet en instance)
Bornes Répartition Un cóté
Conception Solide, calibre 8, a pression avec boitier, cavalier a fiche banane
Fils conducteurs Conception Intégrés au centreur, couche renforcée (brevet n° 6,810,988)
Joint d'étanchéité Conception Joint d'étanchéité couvre-vis
|Enceinte |
Profondeur de montage 172 mm (6.8 po) | 172 mm (6.8 po) | 195 mm (7.7 po) | 195 mm (7.7 po) | 234 mm (9.2 po) | 234 mm (9.2 po)
Diametre de montage - montage avant 231 mm (9.1 po) | 231 mm (9.1 po) [275 mm (10.9 poy275 mm (10.9 poy349 mm (13.8 po)349 mm (13.8 po)
Déplacement - montage avant** 0.050 pi” 0.050 pi’ 0.071 pi” 0.071 pi 0.123 pi” 0.123 pi
Volume ajouté - montage inversé** 0.055 pi” 0.055 pi” 0.085 pi” 0.085 pi” 0.160 pi” 0.160 pi’
Types d'enceintes recommandés close, évent, passe-bande
Volume d'enceinte close (brut) 0.5-0.8 pi” 0.5-0.8 pi” 0.7-1.0 pi 0.7-1.0 pi” 1.325 pi" 1.325 pi
Dimensions extérieures 11.5 рох 11.5 рох 12.75 ро | 11.5 рох 11.5 ро х 12.75 рю| | 13 рох 13 ро х 12.5 ро 13 po x 13 pox 12.5 po iS pox 165 pox 15 po | 165 pox 16.5 pox 15 po
ETA oq A A 4 A 5
Enceinte close optimale Volume uE brut 0.65 pi 0.65 Ы 0.85 pi 0.85 pr 1.75 E 1.75 pi я
Volume intérieur net*** 0.6 pi 0.6 pi 0.78 pi 0.78 pi 1.625 pi 1.625 pi
Fa, Qtc 49Hz, 0.65 48Hz, 0.69 51Hz, 0.67 49Hz, 0.7 43Hz, 0.64 44Hz, 0.65
Volume d'enceinte à évent (brut) 0.6-1.25 pi” 0.6-1.25 pi” 0.75-1.75pi” | 075-175 pi 1.5-3.0 pi” 1.5-3.0 pi”
Dimensions extérieures 125 pox 14,5pox 17,25 pol 125 pos 14,5 po x 17.25 рю) 18 рох 13 5pox165p0 | 18 pox 115 pox 1650 | 19500x 165poxz0po | 195 p0x 165 p0% 20 po
Volume intérieur brut 1.3 pi 1.3 pi” 1.7 pi 1.7 pi” 2.9 pi 2.9 pi”
Aire de l'évent (dimensions) {tin (11pox1po) | лил М1 pox po) |15In (12 рох 1.25 ро) | 15 (2 pox 1.25 pollzas in“ 15 po X 1.5 polzasih (15pox1.5p6)
Enceinte a event optimale Longueur de l'évent 22 in. 22 in. 22.75 in. 22.75 in. 27 in. 27 in.
Déplacement de l'évent 0.237 pi" 0.237 pi" 0.305 pi” 0.305 pi 0.51 pi” 0.51 pi”
Volume intérieur net (Ve)"*" 1pi 1pï 1.3 pi’ 1.3 pi” 2.25 pi 2.25 pi”
Fa, créte, Fe
30 Hz, 2.8 de; 35 Hz
30 Hz, 3.5dB, 35 Hz
33 Hz, 2 de, 36-Hz
33 Hz, 2.5 de, 36 Hz
27 Hz, 2.7 de, 30 Hz
289 Hz, 24 dB, 30 Hz
Paramètres électromécaniques”
Impédance nominale 20+20 40440 20420 4(7+40 20420 411440)
Réponse en fréquence 24 - 600Hz 26 - 600Hz 23 - 500Hz 25 - 500Hz 18 - 400Hz 20 - 400Hz
Sensibilité (NPA @ 1 W/1 m}* 83 dB 83 dB 85 dB 85 dB 87 dB 87 dB
Résistance CC de la bobine (Re) 1.850 +1.850 3.704370 1.850+1.850 3.7(1+3.702 160+1.60 3.450+3.450
Inductance (Le) 1 kHz / 20 kHz 2.48mH / 1.06mH|3.94mH / 1.63mH|2.35mH / 1.01mH3.71mH / 1.67mH/2.53mH / 0.99mHi4.17mH / 1.64mH
Résonance a l'air libre (Fs) 31Hz 33Hz 28Hz 29Hz 22Hz 23Hz
Raideur équivalente (Vas) 20L (0.71 pi”) | 20L (0.71 pi) | 451 (1.6 pi) 451 (1.6 pi”) | 100L (3.53 pi” | 100L (3.53 pi”)
Q mécanique (Qms) 8.67 1.92 8.25 7.89 8.57 7.71
Q électrique (Qes) 0.53 0.57 0.44 0.50 0.43 0.48
Q total (Qts) 0.50 0.53 0.42 0.47 0.41 0.45
Déplacement linéaire [(Hvc-Hag)/2)], un sens (Xmax) 18.1 mm 18.2 mm 18.1 mm 18.2 mm 20.7mm 20.5 mm
Déplacement linéaire magnétique, un sens (Xmag) 19.6 mm 19.6 mm 19.4 mm 19.4 mm 21.4 mm 21.5 mm
Déplacement mécanique, crête à crête 60 mm 60 mm 65 mm 65 mm 70 mm 70 mm
Hauteur de l'écartement (Hag) 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
Hauteur de la bobine (Hvc) 46.1 mm 46.4 mm 46.1 mm 46.4 mm 51.3 mm 51.0 mm
Surface du diaphragme (Sd) 332 cm” 332 ст” 480 cm” 480 cm” 775 ст” 775 om”
Diamètre de la bobine 50 mm (2 po) 50 mm (2 po) 50 mm (2 po) 50 mm (2 po) | 65 mm (2.6 po) | 65 mM (2.6 po)
Poids de l'aimant 85 07 85 07 109 07 109 oz 155 07 155 02
Notes:
Remarque : Les spécifications peuvent changer sans préavis.
# Paramètres T/S mesurés/calculés avec bobines reliées en série, aprés rodage.
* Ne pas utiliser cette spécification souvent mal comprise comme reférence pour la puissance du haut-parleur d'extrêmes graves.
** Panneau de 0,75 po (19 mm) d'épaisseur, ouverture correspondant environ au diamêtre intérieur du joint d'étanchéité.
@ 349.4mm [13-3/4"]
© 370mm [14-9/16"]
@ 273.4mm [10-3/4"]
@ 295mm [11-5/8"
@ 247mm [9-23/32"]
TT
2 3
El
2 iE
= Е
Е , E
: 5
S e
Y Wo
31.51mm 234mm
[4-147 [9-7/32"] a
SWR-1542D
@ 275mm [10-7/8"]
—
25.21mm 195.1mm
[1"] [7-11/16"]
SWR-1242D
272mm [10-23/32
231mm [9-3/32"
247mm __ 195.1mm
[31/32"] [7-11/16"]
SWR-1042D
31.51mm 234mm
[1-1/4"] [9-7/32"]
@ 401mm [15-25/32"]
Г
—
SWR-1522D
275mm [10-7/8
25.21mm 195.1mm
[17] [7-11/16]
SWR-1222D
=
© ы
: :
N К
el
24.7mm _| | 195.1mm
[31/32"] [7-11/16']
SWR-1022D
AHNCPINE.
ALPINE ELECTRONICS,INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141, Japan
Tel: (03) 3494-1101
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Tel: (310) 326-8000
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel: (905) 475-7280
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel: 61 (3) 9769-0000
ALPINE ELECTRONICS DE ESPANA, S.A.
Portal de Gamarra 36, Pabellón 32, 01013
Vitoria (Alava). Apdo: 133,Spain
Tel: 34 (945) 283588
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 Monchen
Germany
Tel:089-32 42 640
ALPINE ELECTRONICS MANUFACTURING OF EUROPE
H-2051 Biatorbagy, orfzag ut. 2, Hungary
Tel: 36 (23) 311-923
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes,
Mk 14 5BU, U.L.
Tel: 44 (1908) 611556
ALPINE ELECTRONICS FRANCE S.A.R.L.
98,Rue de la Bella Etoile, Z.I. Paris Nord ll
B.P. 50016, 95945, Roissy, C.D.G. Cedex,
France
Tel: 33 (1) 4863-8989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano Sul
Naviglio, Italy
Tel: 39 (02) 484781
Printed in TAIWAN