Thomson CT110 Manuel utilisateur

PDF
Document
Thomson La Citadine CT110 : Mode d'emploi + Chat IA | Fixfr
/

User questions

R W

John R.

How to resolve washing machine spin cycle issues?

No votes

Check that the 'DRAIN ONLY' or 'RINSE HOLD' options are not selected, as these settings prevent or interrupt the spin cycle. Note that the 'WOOL - DELICATE' program automatically limits spin speed to between 300 and 450 rpm. To test the spin function, run a standalone 'SPIN ONLY' program. If the lid is locked, stop the machine and wait approximately 2 minutes for the safety lock to release.

R W

John R.

How to troubleshoot spinning issues on a washer-dryer?

No votes

Ensure that the 'DRAIN ONLY' or 'RINSE HOLD' options are not selected, as these prevent the final spin. Note that 'WOOL - DELICATE' programs have a limited spin speed (300 to 450 rpm). To test the function, run an 'SPIN ONLY' cycle. If the machine needs to be opened, wait 2 minutes after stopping for the safety lock to release.

R W

John R.

What should be checked if the spin cycle appears defective?

No votes

Ensure that the 'DRAIN ONLY' or 'RINSE HOLD' options are not selected, as these prevent or interrupt the final spin. Check if a 'WOOL - DELICATE' program is in use, as the speed is automatically limited to 300-450 rpm. To test the function, run a 'SPIN ONLY' program. Note that the lid remains locked during spinning and requires waiting approximately 2 minutes after stopping before it can be opened.

R W

John R.

How to adjust settings or test the function if the spin cycle is not working correctly?

No votes

Ensure that the 'DRAIN ONLY' or 'RINSE HOLD' options are not active. Note that programs for delicate fabrics or wool have automatically limited spin speeds (between 300 and 450 rpm). To test the function independently, set the program selector to 'SPIN' and choose the desired speed. The lid remains locked during operation and requires waiting approximately 2 minutes after stopping to open.

R W

John R.

What should be checked if the spin cycle is not functioning correctly?

No votes

Verify that the 'DRAIN ONLY' or 'RINSE HOLD' options are not selected. Check if the textile program (such as Wool or Delicate) limits the spin speed. You can test the function by running a 'SPIN ONLY' program. Note that the lid remains locked during spinning and requires a 2-minute wait after the machine stops before it can be opened.

R W

John R.

How to troubleshoot a defective or non-functional spin cycle?

No votes

Verify that the 'Drain Only' or 'Rinse Hold' options are not selected, as these prevent or interrupt the final spin. Check the chosen textile program; modes like 'Wool - Delicate' limit spin speed to 300–450 rpm compared to the 1100 rpm of the 'All Textiles' mode. To test the function, run a standalone 'Spin' program. Note that the lid remains locked for approximately 2nd minutes after the machine stops.

Preparing document for printing…
0%