Mac Allister MPWP1800-2 Mode d'emploi

Press the latch on the spray gun to open the port, insert the high-pressure hose connector, and release the latch to lock it. The connection requires force to compress an internal spring; verify it is secure by pulling slightly on the hose.

Press the latch on the gun to open the port, insert the high-pressure hose connector into the port (overcoming the spring resistance), and release the latch to lock it. Verify the connection by pulling slightly on the hose.

Press the latch on the gun to open the connection port, insert the high-pressure hose connector, and release the latch to lock it. Significant force is required to compress the internal spring during insertion; ensure the connection is secure by pulling slightly on the hose.

Press the latch (16b) on the gun to open the port, insert the high-pressure hose connector (15), and release the latch to lock it. Note that the port contains a spring requiring force for insertion. Verify the connection by pulling slightly on the hose to ensure it is secure.

To connect the high-pressure hose to the spray gun, press the latch (16b) to open the connection port, insert the hose connector (15), then release the latch to lock the hose. Ensure the connection is secure by gently pulling on the hose.